Worked. Thanks! On Monday, December 13, 2021 at 3:15:55 PM UTC-7 gjr80 wrote:
> You need to change the MQTT uploader binding to ‘loop’. Refer to the > ‘binding’ option description under ‘Options’ in the MQTT uploader readme - > https://github.com/weewx/weewx/wiki/mqtt#options > > Gary > > On Tuesday, 14 December 2021 at 07:50:18 UTC+10 [email protected] wrote: > >> I am running WeeWx on a Raspi 3B+ running Buster; Weewx version 4.3.0, >> MQTT v 0.23. >> >> I have been running WeeWx for several years. In addition to publishing >> to a couple of services I use the .csv file on a network server for in >> house consumption of weather data. I have recently started converting >> MQTT, publishing to an in-house MQTT server. I use this server for other >> applications as well and it is very responsive with very low latency. >> >> The .csv file updates every few seconds but the MQTT data is only pushed >> every few minutes. For some of the weather data this is adequate but I >> would like to speed up the publishing rate for MQTT. How do I control >> that; there does not seem to be an obvious way to control it? >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4d23e5f3-7990-4f6b-8fa3-44b8a8b66dc4n%40googlegroups.com.
