Just add group_temperature to the commented out list. For example:
[[[Units]]]
# Option "unit_system" above sets the general unit system, but
overriding specific unit
# groups is possible. These are popular choices. Uncomment and
set as appropriate.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_temperature = degree_C
# group_altitude = meter # Options are
'foot' or 'meter'
# group_pressure = mbar # Options are
'inHg', 'mmHg', 'mbar', or 'hPa'
# group_rain = mm # Options are
'inch', 'cm', or 'mm'
# group_rainrate = mm_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# The following line is used to keep the above lines
indented properly.
# It can be ignored.
unused = unused
On Sun, Feb 6, 2022 at 12:19 AM John Jacklin <[email protected]>
wrote:
> Hi
> I have just installed WeeWX 4.60 on a Raspberry Pi using a Davis WLL.
> I live in the UK so want US units but temperature in Centigrade!
>
> I have found these settings in weewx.conf
>
> # Which unit system to use for all reports. Choices are 'us', 'metric',
> or 'metricwx'.
> # You can override this for individual reports.
> unit_system = us
>
> [[[Units]]]
>
> # Option "unit_system" above sets the general unit system, but
> overriding specific unit
> # groups is possible. These are popular choices. Uncomment and
> set as appropriate.
> # NB: The unit is always in the singular. I.e.,
> 'mile_per_hour',
> # NOT 'miles_per_hour'
> [[[[Groups]]]]
> # group_altitude = foot # Options are 'foot' or 'meter'
> # group_pressure = mbar # Options are 'inHg', 'mmHg',
> 'mbar', or 'hPa'
> # group_rain = inch # Options are 'inch', 'cm', or 'mm'
> # group_rainrate = inch_per_hour # Options are
> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
> # The following line is used to keep the above lines
> indented properly.
> # It can be ignored.
> unused = unused
>
> But there doesn't seem to be a way to make WeeWX display centigrade.
>
> Many thanks
>
> JJ
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/e3535cd5-10b4-4fa3-b0e0-8928f1ba483cn%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/e3535cd5-10b4-4fa3-b0e0-8928f1ba483cn%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zEAO%2B8XPb4qwD40jFwft%2Bx7BauiNT%2B4TRLQ%2BzEePyjw8HA%40mail.gmail.com.
