Hi
I have just installed WeeWX 4.60 on a Raspberry Pi using a Davis WLL.
I live in the UK so want US units but temperature in Centigrade!
I have found these settings in weewx.conf
# Which unit system to use for all reports. Choices are 'us', 'metric',
or 'metricwx'.
# You can override this for individual reports.
unit_system = us
[[[Units]]]
# Option "unit_system" above sets the general unit system, but
overriding specific unit
# groups is possible. These are popular choices. Uncomment and
set as appropriate.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
# group_altitude = foot # Options are 'foot' or 'meter'
# group_pressure = mbar # Options are 'inHg', 'mmHg',
'mbar', or 'hPa'
# group_rain = inch # Options are 'inch', 'cm', or 'mm'
# group_rainrate = inch_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# The following line is used to keep the above lines
indented properly.
# It can be ignored.
unused = unused
But there doesn't seem to be a way to make WeeWX display centigrade.
Many thanks
JJ
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/e3535cd5-10b4-4fa3-b0e0-8928f1ba483cn%40googlegroups.com.
