I got this working on my new instance of weewx. I was heading in the right direction -- for some reason the request has an addtional & on the end. I used nginx to modify it, and away it went.
On Tuesday, April 12, 2022 at 10:07:14 PM UTC+10 [email protected] wrote: > What's your weather station (console) model ? > what's your Raspi model ? > an adaptation of your weewx.conf may be needed. > At first glance I suspect a port issue. > On 12.04.2022 10:44, Dan Wheaton wrote: > > Interceptor config: > > [Interceptor] > # This section is for the network traffic interceptor driver. > > # The driver to use: > driver = user.interceptor > > # Specify the hardware device to capture. Options include: > # acurite-bridge - acurite internet bridge > # observer - fine offset WH2600/HP1000/HP1003, aka 'observer' > # lw30x - oregon scientific LW301/LW302 > # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge > device_type = observer > > On Tuesday, April 12, 2022 at 6:37:49 PM UTC+10 Dan Wheaton wrote: > >> More log info: >> syslog: >> Apr 12 18:32:39 raspberrypi weewx[1773] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdCalibrate >> Apr 12 18:32:39 raspberrypi weewx[1773] DEBUG weewx.engine: Loading >> service weewx.engine.StdQC >> Apr 12 18:32:39 raspberrypi weewx[1773] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdQC >> Apr 12 18:32:39 raspberrypi weewx[1773] DEBUG weewx.engine: Loading >> service weewx.wxservices.StdWXCalculate >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO weewx.wxservices: >> StdWXCalculate will use data binding wx_binding >> Apr 12 18:32:39 raspberrypi weewx[1773] DEBUG weewx.manager: Daily >> summary version is 2.0 >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO weewx.manager: Daily >> summaries at V2.0. Patching to V4.0 >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO weewx.manager: >> recalculate_weights: Using database 'weewx.sdb' >> Apr 12 18:32:39 raspberrypi weewx[1773] DEBUG weewx.manager: >> recalculate_weights: Tranche size 100 >> Apr 12 18:33:44 raspberrypi weewx[1773] DEBUG user.interceptor: GET: >> ID=XXXX&PASSWORD=XXXX&indoortempf=73.6&indoorhumidity=64&tempf=63.1&humidity=82&dewptf=57.5&windchillf=63.1&absbaromin=29.39&baromin=29.93&windspeedmph=0.0&windgustmph=0.7&winddir=171&windspdmph_avg2m=0.2&winddir_avg2m=83&windgustmph_10m=0.4&windgustdir_10m=123&rainin=0.0&dailyrainin=0.63&weeklyrainin=0.63&monthlyrainin=0.63&solarradiation=0.0&UV=0&dateutc=2022-4-12%208:10:51&action=updateraw&realtime=1&rtfreq=5& >> >> messages: >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO weewx.engine: Loading >> station type Interceptor (user.interceptor) >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO user.interceptor: driver >> version is 0.53 >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO user.interceptor: device >> type: observer >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO user.interceptor: mode is >> listen >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO user.interceptor: listen on >> :80 >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO user.interceptor: sensor >> map: {'extraTemp2': 'temperature_2', 'pm2_5': 'pm2_5', 'soilTemp1': >> 'soil_temperature_1', 'soilTemp2': 'soil_temperature_2', 'soilTemp3': >> 'soil_temperature_3', 'soilTemp4': 'soil_temperature_4', 'txBatteryStatus': >> 'battery', 'outTemp': 'temperature_out', 'windSpeed': 'wind_speed', >> 'windGust': 'wind_gust', 'outHumidity': 'humidity_out', 'windDir': >> 'wind_dir', 'radiation': 'solar_radiation', 'inTemp': 'temperature_in', >> 'windGustDir': 'wind_gust_dir', 'barometer': 'barometer', 'windchill': >> 'windchill', 'dewpoint': 'dewpoint', 'rain': 'rain', 'extraHumid6': >> 'humidity_6', 'pressure': 'pressure', 'extraHumid4': 'humidity_4', >> 'extraHumid5': 'humidity_5', 'extraHumid2': 'humidity_2', 'extraHumid3': >> 'humidity_3', 'extraTemp8': 'temperature_8', 'extraHumid1': 'humidity_1', >> 'extraTemp6': 'temperature_6', 'extraTemp7': 'temperature_7', 'extraTemp4': >> 'temperature_4', 'extraTemp5': 'temperature_5', 'rainRate': 'rain_rate', >> 'extraTemp3': 'temperature_3', 'extraHumid8': 'humidity_8', 'extraTemp1': >> 'temperature_1', 'leafWet1': 'leafwetness_1', 'leafWet2': 'leafwetness_2', >> 'extraHumid7': 'humidity_7', 'UV': 'uv', 'soilMoist3': 'soil_moisture_3', >> 'soilMoist2': 'soil_moisture_2', 'soilMoist1': 'soil_moisture_1', >> 'inHumidity': 'humidity_in', 'soilMoist4': 'soil_moisture_4'} >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO weewx.engine: StdConvert >> target unit is 0x1 >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO weewx.wxservices: >> StdWXCalculate will use data binding wx_binding >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO weewx.manager: Daily >> summaries at V2.0. Patching to V4.0 >> Apr 12 18:32:39 raspberrypi weewx[1773] INFO weewx.manager: >> recalculate_weights: Using database 'weewx.sdb' >> >> >> >> On Tuesday, April 12, 2022 at 4:13:24 PM UTC+10 Dan Wheaton wrote: >> >>> Hi all. >>> My WS died, so i have replaced it with a similar model, but for the life >>> of me just cannot get the observer to pick up data. >>> >>> I am using DNS spoofing to rtupdate.wunderground.com. Weewx sees the >>> HTTP GET request for data, but isnt doing anytihng with it. I *think* i >>> have to configure a sensor map, but im not 100% certain on that. >>> >>> Here is the HTTP GET request i am seeing. >>> >>> >>> ID=XXXX&PASSWORD=XXXX&indoortempf=74.1&indoorhumidity=68&tempf=66.1&humidity=76&dewptf=58.3&windchillf=66.1&absbaromin=29.38&baromin=29.91&windspeedmph=2.0&windgustmph=3.8&winddir=356&windspdmph_avg2m=2.0&winddir_avg2m=74&windgustmph_10m=2.5&windgustdir_10m=83&rainin=0.21&dailyrainin=0.63&weeklyrainin=0.63&monthlyrainin=0.63&solarradiation=77.47&UV=1&dateutc=2022-4-12%205:51:57&action=updateraw&realtime=1&rtfreq=5 >>> >>> >>> TIA! >>> >>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/2bd7e563-bd1d-45d9-b531-606101ae5b94n%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/2bd7e563-bd1d-45d9-b531-606101ae5b94n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/31df5386-fd0b-4c93-a99e-86864056fa39n%40googlegroups.com.
