Hello; firstly it's clear a lot of effort has been put in weewx and all the
software around it. eg the SDR import, rtl433. So many thanks to everybody.
So.... I'm trying to understand the rain/rainTotal and the deltas setting
of the SDR import.
The sensor is being reported by RTL as the Bresser5in1, with a rainfall
value in mm. I'm guessing this is total over time? Though it doesn't match
to any way shown on the internal display.
I'm guessing what I need to be sent to Weewx is the delta. but can't seem
to work out how to properly configure that.. any pointers welcome...
The sensor map is
```
[SDR]
# This section is for the software-defined radio driver.
# The driver to use
driver = user.sdr
cmd = "rtl_433 -M utc -F json -f 433.92M -f 868M -H 15"
[[deltas]]
rain = rain_mm
[[sensor_map]]
windDir = wind_dir.96.Bresser5in1Packet
windSpeed = wind_speed.96.Bresser5in1Packet
outTemp = temperature.96.Bresser5in1Packet
outHumidity = humidity.96.Bresser5in1Packet
rain_total = rain_total.96.Bresser5in1Packet
windGust = wind_gust.96.Bresser5in1Packet
extraTemp1 = temperature.1:11.HidekiTS04Packet
extraHumid1 = humidity.1:11.HidekiTS04Packet
extraTemp2 = temperature.2:3.HidekiTS04Packet
extraHumid2 = humidity.2:3.HidekiTS04Packet
extraTemp3 = temperature.3:5.HidekiTS04Packet
extraHumid3 = humidity.3:5.HidekiTS04Packet
```
Currently we're 20m or so under water - which added to out elevation means
we're 60m underwater.
Thanks Matthew
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/1bdeeb2f-3247-4892-ad8e-e0d55c901eddn%40googlegroups.com.
