The delta is already set in the sdr.py driver at line 3254. Try removing 
the delta stanza from your config and restarting. Look at the comments at 
the start of the sdr.py driver for info on delta.

Andy

On Monday, April 18, 2022 at 12:48:30 AM UTC-7 [email protected] wrote:

> Hello; firstly it's clear a lot of effort has been put in weewx and all 
> the software around it. eg the SDR import, rtl433. So many thanks to 
> everybody. 
>
> So.... I'm trying to understand the rain/rainTotal and the deltas setting 
> of the SDR import.
>
> The sensor is being reported by RTL as the Bresser5in1, with a rainfall 
> value in mm.  I'm guessing this is total over time? Though it doesn't match 
> to any way shown on the internal display.  
>
> I'm guessing what I need to be sent to Weewx is the delta. but can't seem 
> to work out how to properly configure that.. any pointers welcome...
>
> The sensor map is 
> ```
> [SDR]
>     # This section is for the software-defined radio driver.
>     
>     # The driver to use
>     driver = user.sdr
>
>     cmd = "rtl_433 -M utc -F json -f 433.92M -f 868M -H 15"
>
>     [[deltas]]
>         rain = rain_mm
>
>     [[sensor_map]]
>         windDir = wind_dir.96.Bresser5in1Packet
>         windSpeed = wind_speed.96.Bresser5in1Packet
>         outTemp = temperature.96.Bresser5in1Packet
>         outHumidity = humidity.96.Bresser5in1Packet
>         rain_total = rain_total.96.Bresser5in1Packet
>         windGust = wind_gust.96.Bresser5in1Packet
>         extraTemp1 = temperature.1:11.HidekiTS04Packet
>         extraHumid1 = humidity.1:11.HidekiTS04Packet
>         extraTemp2 = temperature.2:3.HidekiTS04Packet
>         extraHumid2 = humidity.2:3.HidekiTS04Packet
>         extraTemp3 = temperature.3:5.HidekiTS04Packet
>         extraHumid3 = humidity.3:5.HidekiTS04Packet
> ```
>
> Currently we're 20m or so under water - which added to out elevation means 
> we're 60m underwater. 
>
> Thanks Matthew
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/ce8cf8e2-3450-43df-9180-ee548f09257bn%40googlegroups.com.

Reply via email to