Rainer, it is the WeeWX log output I am after not the console output.
Gary
On Monday, 2 May 2022 at 06:26:05 UTC+10 [email protected] wrote:
Gary,
I can't see much more with debug=3, maybe you can 😎 - but here
you go:
Using configuration file /etc/weewx/weewx.conf
debug level is '3'
IP address obtained from station config
Port number set to default port number
Battery state filtering ('False') using the default
Interrogating GW2000 at 192.168.1.46:45000 <http://192.168.1.46:45000>
GW2000 live sensor data (2022-05-01 22:21:08 CEST (1651436468)):
absbarometer: 989.7 mbar, co2: 642, co2_24h_avg: 842,
daymaxwind: 21 kph, gustspeed: 2 kph, humid1: 78%, humid17: 50%,
humid2: 69%, humid3: 80%, humid4: 72%, humid6: 53%,
humid7: 45%, inhumid: 48%, intemp: 20.1°C, leak2: 0, light: 0 lx,
lightningcount: 0, lightningdettime: 25-Apr-2022 15:01,
lightningdist: 34.0 km, outhumid: 81%, outtemp: 9.9°C, pm10:
3.400µg/m³, pm10_24h_avg: 10.000µg/m³, pm251: 11.000µg/m³,
pm251_24h_avg: 15.000µg/m³, pm252: 16.000µg/m³, pm252_24h_avg:
18.000µg/m³, pm255: 3.300µg/m³, pm255_24h_avg: 9.600µg/m³,
relbarometer: 1018.8 mbar, soilmoist1: 13%, soilmoist2: 33%,
soilmoist3: 75%, soilmoist4: 26%, t_rainday: 0.00 cm,
_rainevent: 0.00 cm, t_rainmonth: 0.00 cm, t_rainrate: 0.00 cm/h,
t_rainweek: 0.00 cm, t_rainyear: 30.89 cm, temp1: 10.5°C,
temp17: 20.4°C, temp2: 12.9°C, temp3: 10.3°C, temp4: 12.5°C,
temp5: -25.7°C, temp6: 12.4°C, temp7: 3.0°C, uv: 0 W/m², uvi: 0.0,
wh31_ch1_batt: 0, wh31_ch1_sig: 4, wh31_ch2_batt: 0, wh31_ch2_sig:
4, wh31_ch3_batt: 0, wh31_ch3_sig: 4, wh31_ch4_batt: 0,
wh31_ch4_sig: 4, wh31_ch5_batt: 0, wh31_ch5_sig: 4, wh31_ch6_batt:
0, wh31_ch6_sig: 4, wh31_ch7_batt: 0, wh31_ch7_sig: 4,
wh40_batt: 1.60 V, wh40_sig: 4, wh41_ch1_batt: 4, wh41_ch1_sig: 4,
wh41_ch2_batt: 5, wh41_ch2_sig: 4, wh45_batt: 6,
wh45_sig: 4, wh51_ch1_batt: 1.30 V, wh51_ch1_sig: 4,
wh51_ch2_batt: 1.40 V, wh51_ch2_sig: 4, wh51_ch3_batt: 1.40 V,
wh51_ch3_sig: 4, wh51_ch4_batt: 1.40 V, wh51_ch4_sig: 3,
wh51_ch5_batt: None, wh51_ch5_sig: 0, wh55_ch2_batt: 4,
wh55_ch2_sig: 4, wh57_batt: 5, wh57_sig: 4, winddir: 75°,
windspeed: 0 kph, ws90_batt: 2.98 V, ws90_sig: 4
Using configuration file /etc/weewx/weewx.conf
debug level is '3'
IP address obtained from station config
Port number set to default port number
Battery state filtering ('False') using the default
Interrogating GW2000 at 192.168.1.46:45000 <http://192.168.1.46:45000>
Traditional rain data:
Rain rate: 0.0mm/hr (0.0in/hr))
Event rain: ---mm (---in)
Daily rain: 0.0mm (0.0in)
Weekly rain: ---mm (---in)
Monthly rain: ---mm (---in)
Yearly rain: ---mm (---in)
No piezo rain data available
No rainfall reset time data available
Am 01.05.2022 um 22:19 schrieb gjr80:
Rainer,
Can you run the driver directly again with the --live-data and
--get-all-rain-data command line options but this time add
debug=3 to each command. This should generate a number of log
entries that include the raw data being sent to and received from
the GW2000. Can you post the log output from each command please.
Gary
On Sunday, 1 May 2022 at 23:56:36 UTC+10 [email protected]
wrote:
Hi Gary
just had a test run (driver only) - and the rain doesn't seem
to be handled properly yet
I have both, a WH40 and a WS90 connected to my GW2000.
The live data view both in the WebUI (2.1.4) and WS View Plus
(2.0.31) shows both rain totals
The driver however claims that there are no piezo data and
for the traditional doesn't show the yearly numbers
(as we have 01-May and beginning of the week and no rain
everything else should be zero, but not the yearly rain)
that comes with the --get-all-rain-data option; in the
--live-data option (or --test-driver) the t_rainyearyear is
properly shown as 30.89 cm but no piezo data at all.
The WS90 battery and signal are shown though.
see below
any idea what is wrong - maybe also with my config ?? - the
connected sensors are all properly recognized with --sensors
cheers
Rainer
--------------
Using configuration file /etc/weewx/weewx.conf
Interrogating GW2000 at 192.168.1.46:45000
<http://192.168.1.46:45000>
Traditional rain data:
Rain rate: 0.0mm/hr (0.0in/hr))
Event rain: ---mm (---in)
Daily rain: 0.0mm (0.0in)
Weekly rain: ---mm (---in)
Monthly rain: ---mm (---in)
Yearly rain: ---mm (---in)
No piezo rain data available
No rainfall reset time data available
Using configuration file /etc/weewx/weewx.conf
Interrogating GW2000 at 192.168.1.46:45000
<http://192.168.1.46:45000>
GW2000 live sensor data (2022-05-01 15:44:05 CEST (1651412645)):
absbarometer: 990.1 mbar, co2: 1094, co2_24h_avg: 908,
daymaxwind: 20 kph, gustspeed: 2 kph, humid1: 48%, humid17: 52%,
humid2: 54%, humid3: 50%, humid4: 53%, humid6: 46%, humid7:
53%, inhumid: 52%, intemp: 20.9°C, leak2: 0, light: 35688 lx,
lightningcount: 0, lightningdettime: 25-Apr-2022 15:01,
lightningdist: 34.0 km, outhumid: 49%, outtemp: 15.0°C,
pm10: 5.100µg/m³, pm10_24h_avg: 12.900µg/m³, pm251:
10.000µg/m³, pm251_24h_avg: 16.700µg/m³, pm252: 10.000µg/m³,
pm252_24h_avg: 18.500µg/m³, pm255: 4.300µg/m³, pm255_24h_avg:
12.400µg/m³, relbarometer: 1019.2 mbar,
soilmoist1: 14%, soilmoist2: 35%, soilmoist3: 76%,
soilmoist4: 25%,
t_rainday: 0.00 cm, t_rainevent: 0.00 cm, t_rainmonth: 0.00
cm, t_rainrate: 0.00 cm/h, t_rainweek: 0.00 cm, *t_rainyear:
30.89 cm*,
temp1: 16.8°C, temp17: 21.5°C, temp2: 21.0°C, temp3: 15.9°C,
temp4: 17.1°C, temp5: -18.5°C, temp6: 25.5°C, temp7: 3.4°C,
uv: 10 W/m², uvi: 1.0, wh31_ch1_batt: 0, wh31_ch1_sig: 4,
wh31_ch2_batt: 0, wh31_ch2_sig: 4, wh31_ch3_batt: 0,
wh31_ch3_sig: 4, wh31_ch4_batt: 0, wh31_ch4_sig: 4,
wh31_ch5_batt: 0, wh31_ch5_sig: 4, wh31_ch6_batt: 0,
wh31_ch6_sig: 4,
wh31_ch7_batt: 0, wh31_ch7_sig: 4, wh40_batt: 1.60 V,
wh40_sig: 4, wh41_ch1_batt: 5, wh41_ch1_sig: 4,
wh41_ch2_batt: 5,
wh41_ch2_sig: 4, wh45_batt: 6, wh45_sig: 4, wh51_ch1_batt:
1.30 V, wh51_ch1_sig: 4, wh51_ch2_batt: 1.40 V, wh51_ch2_sig: 4,
wh51_ch3_batt: 1.40 V, wh51_ch3_sig: 4, wh51_ch4_batt: 1.40
V, wh51_ch4_sig: 4, wh51_ch5_batt: None, wh51_ch5_sig: 0,
wh55_ch2_batt: 4, wh55_ch2_sig: 4, wh57_batt: 5, wh57_sig: 4,
winddir: 263°, windspeed: 0 kph, ws90_batt: 2.98 V, ws90_sig: 4
Am 01.05.2022 um 13:50 schrieb gjr80:
I've released v0.5.0b2 of the Ecowitt Gateway driver
(formerly the GW1000 driver). The extension package can be
downloaded from the driver GitHub releases page
<https://github.com/gjr80/weewx-gw1000/releases>. The driver
should support any of the GW1000, GW1100, GW2000, WH2650,
WH2680 and WN1900 devices (though I have only tested against
the GW devices). The main feature of v0.5.0 is support for
the GW2000/WS90 'Wittboy' station. There are many other
changes in v0.5.0, these changes are summarised in the notes
on the GitHub v0.5.0 release page as well as in the change
log. Some of these changes will affect some WeeWX
installations and I strongly urge everyone upgrading to
v0.5.0 to read through the driver Upgrade Guide
<https://github.com/gjr80/weewx-gw1000/wiki/Upgrade-Guide>,
in particular the section Upgrading to v0.5.0
<https://github.com/gjr80/weewx-gw1000/wiki/Upgrade-Guide#upgrading-to-v050>
before
undertaking the upgrade as some changes have the potential
to result in lost data and broken reports. Particular areas
that may require user action involve changes to rainfall
field names, redesignation of WH34 and WH35 sensors as WN34
and WN35 respectively as well as changes to WH40 and WH51
sensor battery state data.
I also strong recommend that users run the driver directly
with the --test-driver command line option to verify the
driver is correctly configured and producing the expected
data before restarting WeeWX.
You will notice that I have started renaming the driver the
/Ecowitt Gateway/ driver rather than the /GW1000 driver/.
The GW1000 driver intitially focussed on supporting the
GW1000 though the API used by the GW1000 was common to other
devices such as the WH2650 and WH2680. Subsequently, Ecowitt
has released the GW1100, GW2000 and WN1900 devices which all
use a common API. Ecowitt refers to the API as the Ecowitt
Gateway LAN/Wi-Fi Gateway API. For these reasons I have
started the process of changing the name of the GW1000
driver to the Ecowitt Gateway driver. In v0.5.0 the changes
are largely cosmetic and internal, mostly centring on
removing references to GW1000 or GW1100 and replacing them
with 'gateway device' or 'gateway devices'. However, the
driver filename is still gw1000.py and wee_extensionstill
lists the driver as GW1000. I intend to change these names
in a future release.
A word about the driver wiki
<https://github.com/gjr80/weewx-gw1000/wiki>. I have updated
most of the pages to reflect the changes introduced in
v0.5.0 but there are still a few that need more work. I will
be updating those over the coming days so please bear with me.
Finally, whilst I have a variety of Ecowitt devices the only
sensor suite or rain gauge I have is the WS90, so there are
many sensor combinations that I have been unable to test
against v0.5.0. I fully expect there will be issues with
v0.5.0, though I expect these will be minor. I would welcome
feedback via weewx-user on any issues
identified/irregularities noticed.
Gary
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/e55ced7f-911c-4a25-8d16-48947608155bn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/e55ced7f-911c-4a25-8d16-48947608155bn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/ec31ae84-8f60-439c-97a5-973467c8feb2n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/ec31ae84-8f60-439c-97a5-973467c8feb2n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/d35a59e1-4109-4554-b864-8819d2c6a40cn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/d35a59e1-4109-4554-b864-8819d2c6a40cn%40googlegroups.com?utm_medium=email&utm_source=footer>.
