I'm really not an expert, but I thought packets sent to CWOP were the same, except for their station ID (and passcode). At least, you're showing up in the findu database: https://www.findu.com/cgi-bin/raw.cgi?call=Dl1ben-13
Now that I look at it, the last 3 packets contain altimeter. Value is 1003.8 mbar. Did you change something? -tk On Sun, Jun 5, 2022 at 10:17 AM 'Ben' via weewx-user < [email protected]> wrote: > Ah, I didn't know that CWOP relies on altimeter, not pressure. > Precipitation winds are missing because I don't have any sensors for it. > > All data that is collected (which is temperature, humidity, air pressure, > air pressure @ sea level, dew point) does actually get into WeeWX. I can > see it on my report page. > > Maybe the correct way to push data to aprs.fi is using > https://github.com/cavedon/weewx-aprs and aprx to connect to APRS IS? > I thought using CWOP was an easy workaround, but maybe I'm wrong. > [email protected] schrieb am Sonntag, 5. Juni 2022 um 18:23:39 UTC+2: > >> NB: CWOP requires *altimeter*. WeeWX needs station pressure (observation >> type "pressure") plus altitude to calculate it. >> >> It looks like altimeter is not the only thing you're missing. >> Precipitation and wind are also missing, which suggests are more general >> problem. >> >> I would look at the path data takes to get into WeeWX. Your software type >> suggests you are using MQTT somewhere along the way. Make sure it is >> configured correctly. >> >> You can also try running weewxd directly from the command line. It will >> print out the LOOP packets and archive records. Make sure they contain what >> you think they should, in particular, type "pressure". >> >> -tk >> >> On Sun, Jun 5, 2022 at 8:30 AM 'Ben' via weewx-user < >> [email protected]> wrote: >> >>> Hello everyone, >>> >>> I'm new to WeeWX, so please bear with me. >>> >>> My setup is a BME280 on a ESP32 Nodemcu delivering temperature, humidity >>> and pressure data via MQTT to WeeWX running on my Raspberry Pi 3B+ w/ >>> dietpi. >>> >>> Everything works fine except that when I try to upload my weather data >>> to aprs.fi (yes, I'm a ham), only temperature and humidity show up. >>> >>> This data and current air pressure *do* show up on my reports, so I'd >>> say there's nothing more to configure, isn't it? >>> >>> When I inspect my raw packets on aprs.fi, they actually do *lack* the >>> pressure data: >>> >>> 2022-06-05 15:33:15 CEST: *DL1BEN-13 >>> <https://aprs.fi/?c=raw&limit=&call=DL1BEN-13>* >>> >APRS,TCPIP*,qAC,FIRST:@051330z5137.18N >>> /00755.37E_.../...g...t070r...p...P...b.....h69.weewx-4.8.0-MQTTSubscribeDriver >>> >>> Here's the relevant info from my weewx.conf: >>> >>> [[CWOP]] >>> # This section is for configuring posts to CWOP. >>> >>> # If you wish to post to CWOP, set the option 'enable' to true, >>> # then specify the station ID (e.g., CW1234). >>> enable = true >>> station = DL1BEN-13 >>> # If this is an APRS (radio amateur) station, specify the >>> # passcode (e.g., 12345). Otherwise, ignore. >>> passcode = #### >>> server_list = rotate.aprs.net:14580, rotate.aprs2.net:14580 >>> >>> What am I doing wrong? >>> Any help is greatly appreciated. >>> >>> Tnx >>> Ben >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/215bd0a3-9607-4759-b65f-804aa1a10322n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/215bd0a3-9607-4759-b65f-804aa1a10322n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/007a8fb3-c845-4391-98f6-e6e2e99c532en%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/007a8fb3-c845-4391-98f6-e6e2e99c532en%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zECx-u-VKLurw3%3D80A-A9RYJntFFgmWVKvq7_gMx_gcMkw%40mail.gmail.com.
