Whatever works. Although I'd sure like to know why the in-the-box uploader doesn't work.
On Sun, Jun 5, 2022 at 11:01 AM 'Ben' via weewx-user < [email protected]> wrote: > Yep, I installed the WeeWX aprs extenstion and configure aprx -- the > extension creates packets containing all data that's available and aprx > pushes it to aprs.fi. > > Should've done that from the beginning, was way easier than I had > expected. :-) > > [email protected] schrieb am Sonntag, 5. Juni 2022 um 20:00:06 UTC+2: > >> I'm really not an expert, but I thought packets sent to CWOP were the >> same, except for their station ID (and passcode). At least, you're showing >> up in the findu database: >> https://www.findu.com/cgi-bin/raw.cgi?call=Dl1ben-13 >> >> Now that I look at it, the last 3 packets contain altimeter. Value is >> 1003.8 mbar. Did you change something? >> >> -tk >> >> On Sun, Jun 5, 2022 at 10:17 AM 'Ben' via weewx-user < >> [email protected]> wrote: >> >>> Ah, I didn't know that CWOP relies on altimeter, not pressure. >>> Precipitation winds are missing because I don't have any sensors for it. >>> >>> All data that is collected (which is temperature, humidity, air >>> pressure, air pressure @ sea level, dew point) does actually get into >>> WeeWX. I can see it on my report page. >>> >>> Maybe the correct way to push data to aprs.fi is using >>> https://github.com/cavedon/weewx-aprs and aprx to connect to APRS IS? >>> I thought using CWOP was an easy workaround, but maybe I'm wrong. >>> [email protected] schrieb am Sonntag, 5. Juni 2022 um 18:23:39 UTC+2: >>> >>>> NB: CWOP requires *altimeter*. WeeWX needs station pressure >>>> (observation type "pressure") plus altitude to calculate it. >>>> >>>> It looks like altimeter is not the only thing you're missing. >>>> Precipitation and wind are also missing, which suggests are more general >>>> problem. >>>> >>>> I would look at the path data takes to get into WeeWX. Your software >>>> type suggests you are using MQTT somewhere along the way. Make sure it is >>>> configured correctly. >>>> >>>> You can also try running weewxd directly from the command line. It will >>>> print out the LOOP packets and archive records. Make sure they contain what >>>> you think they should, in particular, type "pressure". >>>> >>>> -tk >>>> >>>> On Sun, Jun 5, 2022 at 8:30 AM 'Ben' via weewx-user < >>>> [email protected]> wrote: >>>> >>>>> Hello everyone, >>>>> >>>>> I'm new to WeeWX, so please bear with me. >>>>> >>>>> My setup is a BME280 on a ESP32 Nodemcu delivering temperature, >>>>> humidity and pressure data via MQTT to WeeWX running on my Raspberry Pi >>>>> 3B+ >>>>> w/ dietpi. >>>>> >>>>> Everything works fine except that when I try to upload my weather data >>>>> to aprs.fi (yes, I'm a ham), only temperature and humidity show up. >>>>> >>>>> This data and current air pressure *do* show up on my reports, so I'd >>>>> say there's nothing more to configure, isn't it? >>>>> >>>>> When I inspect my raw packets on aprs.fi, they actually do *lack* the >>>>> pressure data: >>>>> >>>>> 2022-06-05 15:33:15 CEST: *DL1BEN-13 >>>>> <https://aprs.fi/?c=raw&limit=&call=DL1BEN-13>* >>>>> >APRS,TCPIP*,qAC,FIRST:@051330z5137.18N >>>>> /00755.37E_.../...g...t070r...p...P...b.....h69.weewx-4.8.0-MQTTSubscribeDriver >>>>> >>>>> Here's the relevant info from my weewx.conf: >>>>> >>>>> [[CWOP]] >>>>> # This section is for configuring posts to CWOP. >>>>> >>>>> # If you wish to post to CWOP, set the option 'enable' to true, >>>>> # then specify the station ID (e.g., CW1234). >>>>> enable = true >>>>> station = DL1BEN-13 >>>>> # If this is an APRS (radio amateur) station, specify the >>>>> # passcode (e.g., 12345). Otherwise, ignore. >>>>> passcode = #### >>>>> server_list = rotate.aprs.net:14580, rotate.aprs2.net:14580 >>>>> >>>>> What am I doing wrong? >>>>> Any help is greatly appreciated. >>>>> >>>>> Tnx >>>>> Ben >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/215bd0a3-9607-4759-b65f-804aa1a10322n%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/215bd0a3-9607-4759-b65f-804aa1a10322n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/007a8fb3-c845-4391-98f6-e6e2e99c532en%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/007a8fb3-c845-4391-98f6-e6e2e99c532en%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/5d85a004-d69d-47ea-843a-b0b841430314n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/5d85a004-d69d-47ea-843a-b0b841430314n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zECDDZV%2BHs20yNun2o-fohvdaDQiAn2SB8%3D8BZSd_O_SDw%40mail.gmail.com.
