Hi Axelle
I think I found your error - in weewx conf
while it is correct to change the database name to distinguish it from
your second instance database, you shouldn't change the database driver
(unless you have an extra one - which you most likely don't have).
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = *ecowitt*.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /home/weewx/archive
should be replaced by
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = *weedb*.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /home/weewx/archive
tant pis ! Ca devrait marcher maintenant 😉
Am 13.10.2022 um 22:19 schrieb Invisible Man:
Ok, I fixed the station_type to *Interceptor* (of course, it makes
sense !). But I still have the *same error.*
File "/usr/share/weewx/weedb/__init__.py", line 86, in connect
__import__(db_dict['driver'])
ModuleNotFoundError: No module named 'ecowitt'
* FYI, in my case, it will be `iface = eth0`
* "You will need to program the customized section of your weather
service section of your control either inside the console" -->
*yes I have done that* + I have verified manually that *the
interceptor receives the packets of the weather station* (in my
case: `sudo PYTHONPATH=. python3 ./user/interceptor.py
--device=ecowitt-client --mode=listen --port=8090`)
* "Depending on your Ecowitt station, not all sensors[..]" : it will
be fine in my case because I only have /basic/ sensors.
So there's an error somewhere else. I'm trying to manually start the
weewx driver this way:
root@vegan:/home/axelle# /usr/bin/weewxd
--pidfile=/var/run/ecowitt.pid /etc/weewx/ecowitt.conf
I attach my ecowitt.conf.
-- Axelle.
On Thursday, October 13, 2022 at 9:52:24 PM UTC+2
[email protected] wrote:
No, this is not correct.
The Simulator is only for Simulation as the name suggests - to
show that weewx is - in principle - properly configured
You have to put *station_type = Interceptor *in the [Station]
stanza in weewx.conf
and install the interceptor driver, which creates an [Interceptor]
stanza in weewx.conf
the Interceptor stanza should look like:
[Interceptor]
driver = user.interceptor
device_type = ecowitt-client
port = 8090
iface = eth0 #or wlan0 depending on the network interface
you/your server use/s
You will need to program the customized section of your weather
service section of your control either inside the console or via
the WS View (Plus) app
which has to match the Interceptor settings in weewx.conf
e.g.
protocol Ecowitt enabled
server - IP address of your weewx server
path - "/" without ""
port 8090
interval 16 seconds
Depending on your Ecowitt station, not all sensors might be shown
as the Interceptor driver on GitHub only deals with the basic
sensors rain, wind, solar, rain, temperature/humidity and air
pressure.
You might need an extended version if you have more and different
sensors, or - if you have a console/gateway with the
GW1000/Ecowitt Gateway interface/API - use the weewx Ecowitt
Gateway driver aka GW1000 API driver
Am 13.10.2022 um 21:30 schrieb Invisible Man:
Hi,
When I start Weewx, I encounter this error:
```
File "/usr/share/weewx/weewx/wxservices.py", line 105, in __init__
initialize=True)
File "/usr/share/weewx/weewx/manager.py", line 597, in get_manager
self.manager_cache[data_binding] = open_manager(manager_dict,
initialize)
File "/usr/share/weewx/weewx/manager.py", line 747, in open_manager
manager_dict['schema'])
File "/usr/share/weewx/weewx/manager.py", line 151, in
open_with_create
connection = weedb.connect(database_dict)
File "/usr/share/weewx/weedb/__init__.py", line 86, in connect
__import__(db_dict['driver'])
ModuleNotFoundError: No module named 'ecowitt'
```
I am not sure whether this means that*my configuration file is
wrong*, *or if I am starting the service in an incorrect way*.
My configuration is quite special : I have *two weather stations*
currently (an old one which I will remove in a couple of weeks,
and a new one). The new one is an *Ecowitt* station, and I want
to use the Weewx Interceptor for that.
As I have 2 weather stations, I need to start *2 weewx daemons*.
I tried https://github.com/weewx/weewx/wiki/weewx-multi which did
not exactly work in my case. So, basically, I copied the
/etc/init.d/weewx script, modified it to read another config
(/etc/weewx/ecowitt.conf) + use another pid file.
As for *my ecowitt.conf*, I am not totally sure it is correct either.
At the end I have specified this, I think this is okay (+I'll
configure the customized ecowitt to use port 8090)?
[Interceptor]
driver = user.interceptor
device_type = ecowitt-client
port = 8090
I am unsure of the beginning of the configuration: I have said
to*use "simulator"*. Is that the correct way to do it?
[station]
...
station_type = Simulator
[Simulator]
loop_interval = 2.5
mode = simulator
driver = weewx.drivers.simulator
Thanks for your help.
PS. This is Weewx 4.3.0 on a RPi4. I have installed the
weewx-interceptor.
-- Axelle
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/065f4932-4280-4cd2-ba8f-6b29240fffacn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/065f4932-4280-4cd2-ba8f-6b29240fffacn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/14d44cc0-9dc7-4d4e-a612-429c46f08846n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/14d44cc0-9dc7-4d4e-a612-429c46f08846n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/c66a18a9-0785-9d25-015b-c0bc9b056541%40gmail.com.
