In your [DatabaseTypes] section you have the driver listed as
"ecowitt.sqlite", when what you want is "weedb.sqlite". Same with the mysql
driver.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = ecowitt.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /home/weewx/archive
On Thu, Oct 13, 2022 at 1:20 PM Invisible Man <[email protected]>
wrote:
> Ok, I fixed the station_type to *Interceptor* (of course, it makes sense
> !). But I still have the *same error.*
>
> File "/usr/share/weewx/weedb/__init__.py", line 86, in connect
> __import__(db_dict['driver'])
> ModuleNotFoundError: No module named 'ecowitt'
>
>
> - FYI, in my case, it will be `iface = eth0`
> - "You will need to program the customized section of your weather
> service section of your control either inside the console" --> *yes I
> have done that* + I have verified manually that *the interceptor
> receives the packets of the weather station* (in my case: `sudo
> PYTHONPATH=. python3 ./user/interceptor.py --device=ecowitt-client
> --mode=listen --port=8090`)
> - "Depending on your Ecowitt station, not all sensors[..]" : it will
> be fine in my case because I only have *basic* sensors.
>
>
> So there's an error somewhere else. I'm trying to manually start the weewx
> driver this way:
>
> root@vegan:/home/axelle# /usr/bin/weewxd --pidfile=/var/run/ecowitt.pid
> /etc/weewx/ecowitt.conf
>
> I attach my ecowitt.conf.
>
> -- Axelle.
>
> On Thursday, October 13, 2022 at 9:52:24 PM UTC+2 [email protected]
> wrote:
>
>> No, this is not correct.
>>
>> The Simulator is only for Simulation as the name suggests - to show that
>> weewx is - in principle - properly configured
>>
>> You have to put *station_type = Interceptor *in the [Station] stanza in
>> weewx.conf
>> and install the interceptor driver, which creates an [Interceptor] stanza
>> in weewx.conf
>>
>> the Interceptor stanza should look like:
>>
>> [Interceptor]
>>
>> driver = user.interceptor
>> device_type = ecowitt-client
>> port = 8090
>>
>> iface = eth0 #or wlan0 depending on the network interface you/your
>> server use/s
>>
>> You will need to program the customized section of your weather service
>> section of your control either inside the console or via the WS View (Plus)
>> app
>> which has to match the Interceptor settings in weewx.conf
>>
>> e.g.
>>
>> protocol Ecowitt enabled
>> server - IP address of your weewx server
>> path - "/" without ""
>> port 8090
>> interval 16 seconds
>>
>> Depending on your Ecowitt station, not all sensors might be shown as the
>> Interceptor driver on GitHub only deals with the basic sensors rain, wind,
>> solar, rain, temperature/humidity and air pressure.
>> You might need an extended version if you have more and different
>> sensors, or - if you have a console/gateway with the GW1000/Ecowitt Gateway
>> interface/API - use the weewx Ecowitt Gateway driver aka GW1000 API driver
>> Am 13.10.2022 um 21:30 schrieb Invisible Man:
>>
>> Hi,
>> When I start Weewx, I encounter this error:
>> ```
>> File "/usr/share/weewx/weewx/wxservices.py", line 105, in __init__
>> initialize=True)
>> File "/usr/share/weewx/weewx/manager.py", line 597, in get_manager
>> self.manager_cache[data_binding] = open_manager(manager_dict,
>> initialize)
>> File "/usr/share/weewx/weewx/manager.py", line 747, in open_manager
>> manager_dict['schema'])
>> File "/usr/share/weewx/weewx/manager.py", line 151, in open_with_create
>> connection = weedb.connect(database_dict)
>> File "/usr/share/weewx/weedb/__init__.py", line 86, in connect
>> __import__(db_dict['driver'])
>> ModuleNotFoundError: No module named 'ecowitt'
>> ```
>>
>> I am not sure whether this means that* my configuration file is wrong*, *or
>> if I am starting the service in an incorrect way*.
>>
>> My configuration is quite special : I have *two weather stations*
>> currently (an old one which I will remove in a couple of weeks, and a new
>> one). The new one is an *Ecowitt* station, and I want to use the Weewx
>> Interceptor for that.
>>
>> As I have 2 weather stations, I need to start *2 weewx daemons*. I tried
>> https://github.com/weewx/weewx/wiki/weewx-multi which did not exactly
>> work in my case. So, basically, I copied the /etc/init.d/weewx script,
>> modified it to read another config (/etc/weewx/ecowitt.conf) + use another
>> pid file.
>>
>> As for *my ecowitt.conf*, I am not totally sure it is correct either.
>> At the end I have specified this, I think this is okay (+I'll configure
>> the customized ecowitt to use port 8090)?
>>
>> [Interceptor]
>> driver = user.interceptor
>> device_type = ecowitt-client
>> port = 8090
>>
>> I am unsure of the beginning of the configuration: I have said to* use
>> "simulator"*. Is that the correct way to do it?
>>
>> [station]
>> ...
>> station_type = Simulator
>>
>> [Simulator]
>> loop_interval = 2.5
>> mode = simulator
>> driver = weewx.drivers.simulator
>>
>> Thanks for your help.
>> PS. This is Weewx 4.3.0 on a RPi4. I have installed the weewx-interceptor.
>>
>> -- Axelle
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/065f4932-4280-4cd2-ba8f-6b29240fffacn%40googlegroups.com
>> <https://groups.google.com/d/msgid/weewx-user/065f4932-4280-4cd2-ba8f-6b29240fffacn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/14d44cc0-9dc7-4d4e-a612-429c46f08846n%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/14d44cc0-9dc7-4d4e-a612-429c46f08846n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zEBitcA%2BGC1gWw9pZufD1LHZDfyB_Rt5c01sbkFFg7Qe5w%40mail.gmail.com.
