Hi Brent, Yes I did, I changed the driver to this one: https://github.com/Drealine/weatherlinklive-driver-weewx
It sorts out the disappearing pressure readings and has more configuration options than WeatherLinkLive UDP. Hope this helps, Rory On Sunday, December 4, 2022 at 7:31:24 AM UTC [email protected] wrote: > Did you ever find a solution to this? I also have the Rapidfire enabled > and have a 10s interval but the pressure only appears on WU every 30 or > seconds for a brief period of time too. > https://www.wunderground.com/dashboard/pws/KTXAUSTI2863 > > thanks > On Saturday, February 26, 2022 at 7:14:06 AM UTC-6 > [email protected] wrote: > >> I meant to say, WeatherLinkLiveUDP is set to 10s interval, it makes no >> difference at 30s, so I assume the UDP packets from WLL only send the >> pressure every 30 seconds or so. >> >> On Saturday, February 26, 2022 at 12:42:05 PM UTC Rory Gillies wrote: >> >>> Hi, >>> >>> I am using the WeatherLinkLiveUDP driver with Weewx to access my David >>> Vantage Pro2 Plus station. Everything works a treat (you can see my weather >>> page here using the excellent Neowx-Material skin: >>> https://www.360shetland.co.uk/weather/index.html >>> >>> I upload to PWS Weather, Windy, and Weather Underground using the >>> rapidfire mode. I had an issue with wind speed being higher than wind gust >>> speed which I have fixed, however the pressure value only seems to be >>> updated every 30 seconds rather than with each loop. My WU Rapid station is >>> here: https://www.wunderground.com/dashboard/pws/ISHETL39/ >>> >>> Is there any way to append the pressure value to the loop data that is >>> uploaded? Although the pressure is recorded and can be seen in the station >>> current condition, the pressure dial disappears for 30 seconds then appears >>> briefly until the next loop packet is uploaded. It's not the end of the >>> world, but I would like the pressure dial to be there all the time. >>> >>> Thanks, >>> >>> Rory >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c51f1991-cf12-4422-95a6-b18ebeb02c8dn%40googlegroups.com.
