Thanks Rory, With the 5 or so different versions of WLL drivers it's difficult to know which one to use.. I will try the one you mentioned.
brent... On Sunday, December 4, 2022 at 8:35:50 AM UTC-6 [email protected] wrote: > Hi Brent, > > Yes I did, I changed the driver to this one: > https://github.com/Drealine/weatherlinklive-driver-weewx > > It sorts out the disappearing pressure readings and has more configuration > options than WeatherLinkLive UDP. > > Hope this helps, > > Rory > > On Sunday, December 4, 2022 at 7:31:24 AM UTC [email protected] wrote: > >> Did you ever find a solution to this? I also have the Rapidfire enabled >> and have a 10s interval but the pressure only appears on WU every 30 or >> seconds for a brief period of time too. >> https://www.wunderground.com/dashboard/pws/KTXAUSTI2863 >> >> thanks >> On Saturday, February 26, 2022 at 7:14:06 AM UTC-6 >> [email protected] wrote: >> >>> I meant to say, WeatherLinkLiveUDP is set to 10s interval, it makes no >>> difference at 30s, so I assume the UDP packets from WLL only send the >>> pressure every 30 seconds or so. >>> >>> On Saturday, February 26, 2022 at 12:42:05 PM UTC Rory Gillies wrote: >>> >>>> Hi, >>>> >>>> I am using the WeatherLinkLiveUDP driver with Weewx to access my David >>>> Vantage Pro2 Plus station. Everything works a treat (you can see my >>>> weather >>>> page here using the excellent Neowx-Material skin: >>>> https://www.360shetland.co.uk/weather/index.html >>>> >>>> I upload to PWS Weather, Windy, and Weather Underground using the >>>> rapidfire mode. I had an issue with wind speed being higher than wind gust >>>> speed which I have fixed, however the pressure value only seems to be >>>> updated every 30 seconds rather than with each loop. My WU Rapid station >>>> is >>>> here: https://www.wunderground.com/dashboard/pws/ISHETL39/ >>>> >>>> Is there any way to append the pressure value to the loop data that is >>>> uploaded? Although the pressure is recorded and can be seen in the station >>>> current condition, the pressure dial disappears for 30 seconds then >>>> appears >>>> briefly until the next loop packet is uploaded. It's not the end of the >>>> world, but I would like the pressure dial to be there all the time. >>>> >>>> Thanks, >>>> >>>> Rory >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0a80a33b-add4-4d64-9f12-4a578f3a84c3n%40googlegroups.com.
