Okay, I've had to do a reinstall of weewx, thanks to a dist-upgrade that
went awry. First, information:
Raspberry Pi 3B+
Acurite 5n1
Debian Bullseye (well... Raspberry Pi OS Lite) - was Buster
No problems reinstalling weewx - I thought. I had to do a complete wipe of
my SD card as the blinking LED told me that the kernel.img file was
missing, and that mean my install was gone. I did save my weewx.conf file
elsewhere, so that's not a problem.
I reinstalled RPi OS with no issues and did my usual routine apart from
anything weewx. No issues.
I have reinstalled Apache2, and I have sqlite and php installed as well. I
do not have Belchertown and W34 reinstalled as I had before. Apache2 is
giving me the 'it works' page, so that's ok.
I have UFW installed, and allowed HTTP, HTTPS, and SSL.
/var/www/html/weewx exists, but is totally empty, which is a problem. How
do I get it to fill? I've tried reinstalling weewx several times, but the
weewx directory is still empty and the web browser just shows the weewx
directory and not generated pages. Running wee_reports isn't helping.
I'm wondering if the database is having problems, but it is newly installed.
Where am I going wrong, and what information am I forgetting to include?
I'm sure I've forgotten something somewhere.
joe
Debug file below:
=-=-=-=-=-=-=
[AcuRite]
# This section is for AcuRite weather stations.
# The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C'
model = AcuRite 01536
# The driver to use:
driver = weewx.drivers.acurite
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2021 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 4.10.2
config_path = /etc/weewx/weewx.conf
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Crestview, FL"
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 30.768
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -86.585
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 164, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = AcuRite
# If you have a website, you may specify an URL
station_url = XXX obfuscated by wee_debug XXX
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[AcuRite]
# This section is for AcuRite weather stations.
# The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C'
model = AcuRite 01536
# The driver to use:
driver = weewx.drivers.acurite
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = true
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = true
username = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = true
station = XXX obfuscated by wee_debug XXX
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = true
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = true
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = true
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
# If you plan on using wunderfixer, set the following
# to your API key:
api_key = XXX obfuscated by wee_debug XXX
# 104a42c6538646858a42c65386a685d5
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
[[WeatherCloud]]
id = XXX obfuscated by wee_debug XXX
key = XXX obfuscated by wee_debug XXX
[[Meteoservices]]
stationid = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[OpenWeatherMap]]
appid = cdeee72f2b6263d890a195340cf28549
station_id = XXX obfuscated by wee_debug XXX
# [[OpenSenseMap]]
# SensorId = 6105ab3795edc2001b4c5d11
# AuthKey =
c1a70b264377121ce6da55ddf94c49443b5acaf1c248a463c51c967aea15ec20
# UsUnits = True
# enable = True
# [[[Sensors]]]
# [[[[outTemp]]]]
# SensorId = ENTER_OUT_TEMP_SENSOR_ID
# [[[[outHumidity]]]]
# SensorId = ENTER_OUT_Humidity_SENSOR_ID
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Whether to log a successful operation
log_success = True
# Whether to log an unsuccessful operation
log_failure = True
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images
and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[Belchertown]]
skin = Belchertown
HTML_ROOT = /var/www/html/weewx/belchertown
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as
/var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = XXX obfuscated by wee_debug XXX
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
####
# Various options for customizing your reports.
[[Defaults]]
unit_system = us
[[[Units]]]
# The following section sets what unit to use for each unit
group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = foot # Options are 'foot' or 'meter'
group_degree_day = degree_F_day # Options are
'degree_F_day' or 'degree_C_day'
group_distance = mile # Options are 'mile' or 'km'
group_pressure = mbar # Options are 'inHg', 'mmHg',
'mbar', 'hPa', or 'kPa'
group_rain = inch # Options are 'inch', 'cm', or 'mm'
group_rainrate = inch_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = mile_per_hour # Options are
'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = mile_per_hour2 # Options are
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_F # Options are 'degree_F' or
'degree_C'
# The following section sets the formatting for each type of
unit.
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km = %.1f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
kPa = %.2f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"
# The following section overrides the label used for each type
of unit
[[[[Labels]]]]
meter = " meter", " meters" # You may prefer "metre".
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""
# The following section sets the format for each time scale.
# The values below will work in every locale, but they may not
look
# particularly attractive.
[[[[TimeFormats]]]]
hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X
[[[[Ordinates]]]]
# Ordinal directions. The last one is for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW,
WSW, W, WNW, NW, NNW, N/A
# The following section sets the base temperatures used for the
# calculation of heating, cooling, and growing degree-days.
[[[[DegreeDays]]]]
# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# Base temperature for growing days, with unit:
growing_base = 50, degree_F
# A trend takes a difference across a time period. The following
# section sets the time period, and how big an error is allowed
to
# still be counted as the start or end of a period.
[[[[Trend]]]]
time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes
# The labels to be used for each observation type
[[[Labels]]]
# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W
# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f
# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
inHumidity = Inside Humidity
inTemp = Inside Temperature
outHumidity = Humidity
outTemp = Outside Temperature
radiation = Radiation
rain = Rain
rainRate = Rain Rate
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
extraTemp1 = Temperature1
extraTemp2 = Temperature2
extraTemp3 = Temperature3
# Sensor status indicators
rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage
[[[Almanac]]]
# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing
gibbous, Full, Waning gibbous, Last quarter, Waning crescent
#
################################################################################
[[Weather34Report]]
skin = Weather34
HTML_ROOT = /var/www/html/weewx/weather34/
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_degree_day = degree_C_day
group_pressure = hPa
group_rain = mm
group_rainrate = mm_per_hour
group_speed = meter_per_second
group_speed2 = meter_per_second2
group_temperature = degree_C
################################################################################
[[w34Highcharts]]
HTML_ROOT = /var/www/html/weewx/weather34/w34highcharts
skin = w34Highcharts
enable = true
[[[CheetahGenerator]]]
[[[[ToDate]]]]
[[[[[YearJSON]]]]]
stale_age = 600
[[[Units]]]
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = N/A
[[[[Labels]]]]
centibar = cb
cm = cm
cm_per_hour = cm/hr
degree_C = ° C
degree_F = ° F
degree_compass = °
foot = feet
hPa = hPa
inHg = inHg
inch = in
inch_per_hour = in/hr
km_per_hour = km/hr
km_per_hour2 = km/hr
knot = knots
knot2 = knots
mbar = mbar
meter = meters
meter_per_second = m/s
meter_per_second2 = m/s
mile_per_hour = mph
mile_per_hour2 = mph
mm = mm
mmHg = mmHg
mm_per_hour = mm/hr
percent = %
uv_index = Index
volt = V
watt_per_meter_squared = W/m²
NONE = ""
[[[Extras]]]
numYears = 5
[[[[MinRange]]]]
outTemp = 10, degree_C
windchill = 10, degree_C
barometer = 20, hPa
windSpeed = 10
rain = 5, mm
radiation = 500
UV = 16
[[[[WindRose]]]]
title = Wind Rose
source = windSpeed
period = 3600, 86400, 604800, month, year
aggregate_type = ""
aggregate_interval = ""
petals = 16
petal_colors = aqua, 0x0099FF, 0x0033FF, 0x009900,
0x00CC00, 0x33FF33, 0xCCFF00
speedfactor = 0.0, 0.1, 0.2, 0.3, 0.5, 0.7, 1.0
legend_title = True
band_percent = True
bullseye_percent = True
precision = 1
bullseye_size = 20
bullseye_color = 0xFFFACD
calm_limit = 0.1
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
# Whether to log successful archive operations
log_success = True
# Whether to log unsuccessful archive operations
log_failure = True
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = XXX obfuscated by wee_debug XXX
# The password for the user name (quotes guard against parsing
errors)
password = XXX obfuscated by wee_debug XXX
##############################################################################
# This section configures the internal weewx engine.
[Engine]
# The following section specifies which services should be run and in
what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate, user.weather34.Weather34RealTime
xtype_services = weewx.wxxtypes.StdWXXTypes,
weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS,
user.wcloud.WeatherCloud, user.opensensemap.OpenSenseMap,
user.meteoservices.Meteoservices, user.owm.OpenWeatherMap
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
[Forecast]
data_binding = forecast_binding
[[XTide]]
location = "Pensacola, FL"
[[Zambretti]]
hemisphere = NORTH
[[NWS]]
lid = FLZ205
foid = MOB
[[WU]]
api_key = XXX obfuscated by wee_debug XXX
[[OWM]]
api_key = XXX obfuscated by wee_debug XXX
[[UKMO]]
api_key = XXX obfuscated by wee_debug XXX
location = INSERT_UK_LOCATION_HERE
[[Aeris]]
client_id = INSERT_AERIS_CLIENT_ID_HERE
client_secret = INSERT_AERIS_CLIENT_SECRET_HERE
[[WWO]]
api_key = XXX obfuscated by wee_debug XXX
[[DS]]
api_key = XXX obfuscated by wee_debug XXX
#
################################################################################
[Weather34RealTime]
unit_system = METRICWX
exclude_fields = rain
cache_enable = True
cache_stale_time = 900
weewx_port = 25252
webserver_address = ""
weewxserver_address = ""
weewx_file_transfer = ""
HTML_ROOT = ""
#
################################################################################
# Air quality, your own latitude, longitude, token and interval in seconds
are required
# Dark Sky, your own latitude, longitude, API key, language, units and
interval in seconds required
# DarkSky Units key us = US Units, ca = METRIC Units, si = METRICWX Units,
uk2 = UK(metric with mph) Units
# Example
https://api.forecast.io/forecast/yourtokenhere/51.94,-0.987?lang=en&units=uk2
# Weather Underground, your own latitude, longitude, API key, language,
units and interval in seconds required
# Weather Underground Units key e = US, m = METRIC, s = SI(with m/s
Scandinavia), h = UK(with mph)
# Example
https://api.weather.com/v3/wx/forecast/daily/5day?geocode=51.94,-0.987&language=en&format=json&units=h&apiKey=yourapikeyhere
# Earthquake reports interval in seconds required
# K-Index reports interval in seconds required
# Metar reports airport code, API Key and interval in seconds required
# Example https://api.checkwx.com/metar/EGTK/decoded
# Example X-API-Key:yourapikeyhere
# Purpleair reports device ID and interval in seconds required
# Example https://www.purpleair.com/json?show=38365
# Meteoalrm European weather warnings country code, region code and
interval in seconds required
# Example
http://192.168.1.232/weewx/weather34/eualert.php?country=UK®ion=013
# Select the services you require by creating a string of the services above
# Example services = ds.me.eq.ki.wu.aq.al.ah.ao.aa.pu
# Select your preferred time interval in seconds for each service
[Weather34WebServices]
aq_url =
https://api.waqi.info/feed/geo:30.76837;-86.58542/?token=2ef575910d876ec2da204b68efe24624a7806de4
aq_interval = 3600
ds_url = https://api.forecast.io/forecast//30.76837,
-86.58542?lang=en&units=
ds_interval = 3600
wu_url =
https://api.weather.com/v3/wx/forecast/daily/5day?geocode=30.76837,
-86.58542&language=en&format=json&units=e&apiKey=104a42c6538646858a42c65386a685d5
wu_interval = 3600
eq_url = https://www.emsc-csem.org/service/rss/rss.php?typ=emsc
eq_interval = 3600
eq_xml_data = False
ki_url =
https://services.swpc.noaa.gov/products/noaa-planetary-k-index-forecast.json
ki_interval = 21600
me_url = https://api.checkwx.com/metar//decoded
me_header = X-API-Key:
me_interval = 3600
pu_url = https://www.purpleair.com/json?show=
pu_interval = 3600
al_url =
http://192.168.1.115/weewx/weather34/eualert.php?country=®ion=
al_interval = 3600
enable_uk = undefined
uk_url =
https://metoffice.gov.uk/public/data/PWSCache/WarningsRSS/Region/
uk_interval = 3600
uk_xml_data = undefined
services = aq.wu.eq.ki.me
#
################################################################################
# Apply your own latitude and longitude and continent to the URLs in this
section
[Weather34CloudCover]
enable = False
db_field = signal8
cc_interval = 300
cc1_url =
https://api.sat24.com/crop?type=visual5hdcomplete&lat=30.76837&lon=-86.58542&width=300&height=300&zoom=1.00&continent=ana
cc2_url =
https://api.sat24.com/crop?type=infraPolair&lat=30.76837&lon=-86.58542&width=300&height=300&zoom=1.00&continent=ana
Using verbosity=1, displaying most info
wee_debug output will be sent to stdout(console)
Using configuration file /etc/weewx/weewx.conf
Using database binding 'wx_binding', which is bound to database
'archive_sqlite'
System info
Platform: Linux-6.1.21-v7+-armv7l-with-glibc2.31
Python Version: 3.9.2
Load Information
1 minute load average: 0.11
5 minute load average: 0.03
15 minute load average: 0.01
General Weewx info
Weewx version 4.10.2 detected.
Station info
Station type: AcuRite
Driver: weewx.drivers.acurite
Driver info
Currently installed extensions
No extensions installed
Archive info
Database name: weewx.sdb
Table name: archive
Version 4.0
Unit system: None (Unknown unit constant)
First good timestamp: ******* N/A ******* ( N/A )
Last good timestamp: ******* N/A ******* ( N/A )
Number of records: None (no archive records found)
It is likely that the database (weewx.sdb) archive
table (archive)
exists but contains no data.
weewx (weewx.conf) is set to use an archive interval of 300 seconds.
The station hardware was not interrogated in determining archive interval.
Databases configured in weewx.conf
Database name: weewx.sdb
Database driver: weedb.sqlite
Database name: weewx
Database driver: weedb.mysql
Database host: localhost
Parsed and obfuscated weewx.conf
wee_debug report successfully generated
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/440fe476-d528-4d8d-9d31-9a25dc330870n%40googlegroups.com.
