The wee_debug report is showing that your database is empty, so, naturally, no reports can be generated. From the wee_debug report, the database should be located at /var/lib/weewx/weewx.sdb.
Hopefully, you have a backup of the database. If not, there's not much you can do except start all over. -tk On Fri, May 5, 2023 at 8:01 AM Joseph Barrow <[email protected]> wrote: > Okay, I've had to do a reinstall of weewx, thanks to a dist-upgrade that > went awry. First, information: > > Raspberry Pi 3B+ > Acurite 5n1 > Debian Bullseye (well... Raspberry Pi OS Lite) - was Buster > > No problems reinstalling weewx - I thought. I had to do a complete wipe of > my SD card as the blinking LED told me that the kernel.img file was > missing, and that mean my install was gone. I did save my weewx.conf file > elsewhere, so that's not a problem. > > I reinstalled RPi OS with no issues and did my usual routine apart from > anything weewx. No issues. > > I have reinstalled Apache2, and I have sqlite and php installed as well. I > do not have Belchertown and W34 reinstalled as I had before. Apache2 is > giving me the 'it works' page, so that's ok. > > I have UFW installed, and allowed HTTP, HTTPS, and SSL. > > /var/www/html/weewx exists, but is totally empty, which is a problem. How > do I get it to fill? I've tried reinstalling weewx several times, but the > weewx directory is still empty and the web browser just shows the weewx > directory and not generated pages. Running wee_reports isn't helping. > > I'm wondering if the database is having problems, but it is newly > installed. > > Where am I going wrong, and what information am I forgetting to include? > I'm sure I've forgotten something somewhere. > > joe > > Debug file below: > > =-=-=-=-=-=-= > > [AcuRite] > # This section is for AcuRite weather stations. > > # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' > model = AcuRite 01536 > > # The driver to use: > driver = weewx.drivers.acurite > # WEEWX CONFIGURATION FILE > # > # Copyright (c) 2009-2021 Tom Keffer <[email protected]> > # See the file LICENSE.txt for your rights. > > > ############################################################################## > > # This section is for general configuration information. > > # Set to 1 for extra debug info, otherwise comment it out or set to zero > debug = 1 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = / > > # Whether to log successful operations > log_success = True > > # Whether to log unsuccessful operations > log_failure = True > > # How long to wait before timing out a socket (FTP, HTTP) connection > socket_timeout = 20 > > # Do not modify this. It is used when installing and updating weewx. > version = 4.10.2 > config_path = /etc/weewx/weewx.conf > > > ############################################################################## > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = "Crestview, FL" > > # Latitude in decimal degrees. Negative for southern hemisphere > latitude = 30.768 > # Longitude in decimal degrees. Negative for western hemisphere. > longitude = -86.585 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 164, foot > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = AcuRite > > # If you have a website, you may specify an URL > station_url = XXX obfuscated by wee_debug XXX > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > > > ############################################################################## > > [AcuRite] > # This section is for AcuRite weather stations. > > # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' > model = AcuRite 01536 > > # The driver to use: > driver = weewx.drivers.acurite > > > ############################################################################## > > # This section is for uploading data to Internet sites > > [StdRESTful] > > [[StationRegistry]] > # To register this weather station with weewx, set this to true > register_this_station = true > > [[AWEKAS]] > # This section is for configuring posts to AWEKAS. > > # If you wish to do this, set the option 'enable' to true, > # and specify a username and password. > # To guard against parsing errors, put the password in quotes. > enable = true > username = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > [[CWOP]] > # This section is for configuring posts to CWOP. > > # If you wish to do this, set the option 'enable' to true, > # and specify the station ID (e.g., CW1234). > enable = true > station = XXX obfuscated by wee_debug XXX > > # If this is an APRS (radio amateur) station, uncomment > # the following and replace with a passcode (e.g., 12345). > #passcode = replace_me (APRS stations only) > > [[PWSweather]] > # This section is for configuring posts to PWSweather.com. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > # To guard against parsing errors, put the password in quotes. > enable = true > station = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > [[WOW]] > # This section is for configuring posts to WOW. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > # To guard against parsing errors, put the password in quotes. > enable = true > station = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > [[Wunderground]] > # This section is for configuring posts to the Weather Underground. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station (e.g., 'KORHOODR3') and password. > # To guard against parsing errors, put the password in quotes. > enable = true > station = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > # If you plan on using wunderfixer, set the following > # to your API key: > api_key = XXX obfuscated by wee_debug XXX > # 104a42c6538646858a42c65386a685d5 > > # Set the following to True to have weewx use the WU "Rapidfire" > # protocol. Not all hardware can support it. See the User's Guide. > rapidfire = False > > [[WeatherCloud]] > id = XXX obfuscated by wee_debug XXX > key = XXX obfuscated by wee_debug XXX > > [[Meteoservices]] > stationid = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > [[OpenWeatherMap]] > appid = cdeee72f2b6263d890a195340cf28549 > station_id = XXX obfuscated by wee_debug XXX > > > > # [[OpenSenseMap]] > # SensorId = 6105ab3795edc2001b4c5d11 > # AuthKey = > c1a70b264377121ce6da55ddf94c49443b5acaf1c248a463c51c967aea15ec20 > # UsUnits = True > # enable = True > # [[[Sensors]]] > # [[[[outTemp]]]] > # SensorId = ENTER_OUT_TEMP_SENSOR_ID > # [[[[outHumidity]]]] > # SensorId = ENTER_OUT_Humidity_SENSOR_ID > > > ############################################################################## > > # This section specifies what reports, using which skins, to generate. > > [StdReport] > > # Where the skins reside, relative to WEEWX_ROOT > SKIN_ROOT = /etc/weewx/skins > > # Where the generated reports should go, relative to WEEWX_ROOT > HTML_ROOT = /var/www/html/weewx > > # The database binding indicates which data should be used in reports. > data_binding = wx_binding > > # Whether to log a successful operation > log_success = True > > # Whether to log an unsuccessful operation > log_failure = True > > # Each of the following subsections defines a report that will be run. > # See the customizing guide to change the units, plot types and line > # colors, modify the fonts, display additional sensor data, and other > # customizations. Many of those changes can be made here by overriding > # parameters, or by modifying templates within the skin itself. > > [[SeasonsReport]] > # The SeasonsReport uses the 'Seasons' skin, which contains the > # images, templates and plots for the report. > skin = Seasons > enable = true > > [[SmartphoneReport]] > # The SmartphoneReport uses the 'Smartphone' skin, and the images > and > # files are placed in a dedicated subdirectory. > skin = Smartphone > enable = false > HTML_ROOT = /var/www/html/weewx/smartphone > > [[MobileReport]] > # The MobileReport uses the 'Mobile' skin, and the images and files > # are placed in a dedicated subdirectory. > skin = Mobile > enable = false > HTML_ROOT = /var/www/html/weewx/mobile > > [[StandardReport]] > # This is the old "Standard" skin. By default, it is not enabled. > skin = Standard > enable = false > > [[Belchertown]] > skin = Belchertown > HTML_ROOT = /var/www/html/weewx/belchertown > enable = false > > [[FTP]] > # FTP'ing the results to a webserver is treated as just another > report, > # albeit one with an unusual report generator! > skin = Ftp > > # If you wish to use FTP, set "enable" to "true", then > # fill out the next four lines. > # Use quotes around passwords to guard against parsing errors. > enable = false > user = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > server = replace_me # The ftp server name, e.g, > www.myserver.org > path = replace_me # The destination directory, e.g., /weather > > # Set to True for an FTP over TLS (FTPS) connection. Not all > servers > # support this. > secure_ftp = False > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = /var/www/html/weewx > > # Most FTP servers use port 21 > port = 21 > > # Set to 1 to use passive mode, zero for active mode > passive = 1 > > [[RSYNC]] > # rsync'ing to a webserver is treated as just another report > skin = Rsync > > # If you wish to use rsync, you must configure passwordless ssh > using > # public/private key authentication from the user account that > weewx > # runs to the user account on the remote machine where the files > # will be copied. > # > # If you wish to use rsync, set "enable" to "true", then > # fill out server, user, and path. > # The server should appear in your .ssh/config file. > # The user is the username used in the identity file. > # The path is the destination directory, such as > /var/www/html/weather. > # Be sure that the user has write permissions on the destination! > enable = false > server = replace_me > user = XXX obfuscated by wee_debug XXX > path = replace_me > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = /var/www/html/weewx > > # Rsync can be configured to remove files from the remote server if > # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if > you > # make a mistake in the remote path, you could could > unintentionally > # cause unrelated files to be deleted. Set to 1 to enable remote > file > # deletion, zero to allow files to accumulate remotely. > delete = 0 > > #### > > # Various options for customizing your reports. > > [[Defaults]] > unit_system = us > > [[[Units]]] > > # The following section sets what unit to use for each unit > group. > # NB: The unit is always in the singular. I.e., > 'mile_per_hour', > # NOT 'miles_per_hour' > [[[[Groups]]]] > > group_altitude = foot # Options are 'foot' or 'meter' > group_degree_day = degree_F_day # Options are > 'degree_F_day' or 'degree_C_day' > group_distance = mile # Options are 'mile' or 'km' > group_pressure = mbar # Options are 'inHg', 'mmHg', > 'mbar', 'hPa', or 'kPa' > group_rain = inch # Options are 'inch', 'cm', or 'mm' > group_rainrate = inch_per_hour # Options are > 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' > group_speed = mile_per_hour # Options are > 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' > group_speed2 = mile_per_hour2 # Options are > 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' > group_temperature = degree_F # Options are 'degree_F' > or 'degree_C' > > # The following section sets the formatting for each type of > unit. > [[[[StringFormats]]]] > > centibar = %.0f > cm = %.2f > cm_per_hour = %.2f > degree_C = %.1f > degree_F = %.1f > degree_compass = %.0f > foot = %.0f > hPa = %.1f > hour = %.1f > inHg = %.3f > inch = %.2f > inch_per_hour = %.2f > km = %.1f > km_per_hour = %.0f > km_per_hour2 = %.1f > knot = %.0f > knot2 = %.1f > kPa = %.2f > mbar = %.1f > meter = %.0f > meter_per_second = %.1f > meter_per_second2 = %.1f > mile = %.1f > mile_per_hour = %.0f > mile_per_hour2 = %.1f > mm = %.1f > mmHg = %.1f > mm_per_hour = %.1f > percent = %.0f > second = %.0f > uv_index = %.1f > volt = %.1f > watt_per_meter_squared = %.0f > NONE = " N/A" > > # The following section overrides the label used for each type > of unit > [[[[Labels]]]] > > meter = " meter", " meters" # You may prefer "metre". > day = " day", " days" > hour = " hour", " hours" > minute = " minute", " minutes" > second = " second", " seconds" > NONE = "" > > # The following section sets the format for each time scale. > # The values below will work in every locale, but they may not > look > # particularly attractive. > [[[[TimeFormats]]]] > > hour = %H:%M > day = %X > week = %X (%A) > month = %x %X > year = %x %X > rainyear = %x %X > current = %x %X > ephem_day = %X > ephem_year = %x %X > > [[[[Ordinates]]]] > > # Ordinal directions. The last one is for no wind direction > directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, > WSW, W, WNW, NW, NNW, N/A > > # The following section sets the base temperatures used for the > # calculation of heating, cooling, and growing degree-days. > [[[[DegreeDays]]]] > > # Base temperature for heating days, with unit: > heating_base = 65, degree_F > # Base temperature for cooling days, with unit: > cooling_base = 65, degree_F > # Base temperature for growing days, with unit: > growing_base = 50, degree_F > > # A trend takes a difference across a time period. The > following > # section sets the time period, and how big an error is > allowed to > # still be counted as the start or end of a period. > [[[[Trend]]]] > > time_delta = 10800 # 3 hours > time_grace = 300 # 5 minutes > > # The labels to be used for each observation type > [[[Labels]]] > > # Set to hemisphere abbreviations suitable for your location: > hemispheres = N, S, E, W > > # Formats to be used for latitude whole degrees, longitude > whole > # degrees, and minutes: > latlon_formats = %02d, %03d, %05.2f > > # Generic labels, keyed by an observation type. > [[[[Generic]]]] > barometer = Barometer > dewpoint = Dew Point > ET = ET > heatindex = Heat Index > inHumidity = Inside Humidity > inTemp = Inside Temperature > outHumidity = Humidity > outTemp = Outside Temperature > radiation = Radiation > rain = Rain > rainRate = Rain Rate > UV = UV Index > windDir = Wind Direction > windGust = Gust Speed > windGustDir = Gust Direction > windSpeed = Wind Speed > windchill = Wind Chill > windgustvec = Gust Vector > windvec = Wind Vector > extraTemp1 = Temperature1 > extraTemp2 = Temperature2 > extraTemp3 = Temperature3 > > # Sensor status indicators > > rxCheckPercent = Signal Quality > txBatteryStatus = Transmitter Battery > windBatteryStatus = Wind Battery > rainBatteryStatus = Rain Battery > outTempBatteryStatus = Outside Temperature Battery > inTempBatteryStatus = Inside Temperature Battery > consBatteryVoltage = Console Battery > heatingVoltage = Heating Battery > supplyVoltage = Supply Voltage > referenceVoltage = Reference Voltage > > [[[Almanac]]] > > # The labels to be used for the phases of the moon: > moon_phases = New, Waxing crescent, First quarter, Waxing > gibbous, Full, Waning gibbous, Last quarter, Waning crescent > # > > ################################################################################ > > [[Weather34Report]] > skin = Weather34 > HTML_ROOT = /var/www/html/weewx/weather34/ > [[[Units]]] > [[[[Groups]]]] > group_altitude = meter > group_degree_day = degree_C_day > group_pressure = hPa > group_rain = mm > group_rainrate = mm_per_hour > group_speed = meter_per_second > group_speed2 = meter_per_second2 > group_temperature = degree_C > > > ################################################################################ > > [[w34Highcharts]] > HTML_ROOT = /var/www/html/weewx/weather34/w34highcharts > skin = w34Highcharts > enable = true > [[[CheetahGenerator]]] > [[[[ToDate]]]] > [[[[[YearJSON]]]]] > stale_age = 600 > [[[Units]]] > [[[[StringFormats]]]] > centibar = %.0f > cm = %.2f > cm_per_hour = %.2f > degree_C = %.1f > degree_F = %.1f > degree_compass = %.0f > foot = %.0f > hPa = %.1f > inHg = %.3f > inch = %.2f > inch_per_hour = %.2f > km_per_hour = %.0f > km_per_hour2 = %.1f > knot = %.0f > knot2 = %.1f > mbar = %.1f > meter = %.0f > meter_per_second = %.1f > meter_per_second2 = %.1f > mile_per_hour = %.0f > mile_per_hour2 = %.1f > mm = %.1f > mmHg = %.1f > mm_per_hour = %.1f > percent = %.0f > uv_index = %.1f > volt = %.1f > watt_per_meter_squared = %.0f > NONE = N/A > [[[[Labels]]]] > centibar = cb > cm = cm > cm_per_hour = cm/hr > degree_C = ° C > degree_F = ° F > degree_compass = ° > foot = feet > hPa = hPa > inHg = inHg > inch = in > inch_per_hour = in/hr > km_per_hour = km/hr > km_per_hour2 = km/hr > knot = knots > knot2 = knots > mbar = mbar > meter = meters > meter_per_second = m/s > meter_per_second2 = m/s > mile_per_hour = mph > mile_per_hour2 = mph > mm = mm > mmHg = mmHg > mm_per_hour = mm/hr > percent = % > uv_index = Index > volt = V > watt_per_meter_squared = W/m² > NONE = "" > [[[Extras]]] > numYears = 5 > [[[[MinRange]]]] > outTemp = 10, degree_C > windchill = 10, degree_C > barometer = 20, hPa > windSpeed = 10 > rain = 5, mm > radiation = 500 > UV = 16 > [[[[WindRose]]]] > title = Wind Rose > source = windSpeed > period = 3600, 86400, 604800, month, year > aggregate_type = "" > aggregate_interval = "" > petals = 16 > petal_colors = aqua, 0x0099FF, 0x0033FF, 0x009900, > 0x00CC00, 0x33FF33, 0xCCFF00 > speedfactor = 0.0, 0.1, 0.2, 0.3, 0.5, 0.7, 1.0 > legend_title = True > band_percent = True > bullseye_percent = True > precision = 1 > bullseye_size = 20 > bullseye_color = 0xFFFACD > calm_limit = 0.1 > > > ############################################################################## > > # This service acts as a filter, converting the unit system coming from > # the hardware to a unit system in the database. > > [StdConvert] > > # The target_unit affects only the unit system in the database. Once > # chosen it cannot be changed without converting the entire database. > # Modification of target_unit after starting weewx will result in > # corrupt data - the database will contain a mix of US and METRIC data. > # > # The value of target_unit does not affect the unit system for > # reporting - reports can display US, Metric, or any combination of > units. > # > # In most cases, target_unit should be left as the default: US > # > # In particular, those migrating from a standard wview installation > # should use US since that is what the wview database contains. > > # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! > target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' > > > ############################################################################## > > # This section can adjust data using calibration expressions. > > [StdCalibrate] > > [[Corrections]] > # For each type, an arbitrary calibration expression can be given. > # It should be in the units defined in the StdConvert section. > # Example: > foo = foo + 0.2 > > > ############################################################################## > > # This section is for quality control checks. If units are not specified, > # values must be in the units defined in the StdConvert section. > > [StdQC] > > [[MinMax]] > barometer = 26, 32.5, inHg > pressure = 24, 34.5, inHg > outTemp = -40, 120, degree_F > inTemp = 10, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > windSpeed = 0, 120, mile_per_hour > rain = 0, 10, inch > > > ############################################################################## > > # This section controls the origin of derived values. > > [StdWXCalculate] > > [[Calculations]] > # How to calculate derived quantities. Possible values are: > # hardware - use the value provided by hardware > # software - use the value calculated by weewx > # prefer_hardware - use value provide by hardware if available, > # otherwise use value calculated by weewx > > pressure = prefer_hardware > altimeter = prefer_hardware > appTemp = prefer_hardware > barometer = prefer_hardware > cloudbase = prefer_hardware > dewpoint = prefer_hardware > ET = prefer_hardware > heatindex = prefer_hardware > humidex = prefer_hardware > inDewpoint = prefer_hardware > maxSolarRad = prefer_hardware > rainRate = prefer_hardware > windchill = prefer_hardware > windrun = prefer_hardware > > > ############################################################################## > > # For hardware that supports it, this section controls how often the > # onboard clock gets updated. > > [StdTimeSynch] > > # How often to check the weather station clock for drift (in seconds) > clock_check = 14400 > > # How much it can drift before we will correct it (in seconds) > max_drift = 5 > > > ############################################################################## > > # This section is for configuring the archive service. > > [StdArchive] > > # If the station hardware supports data logging then the archive > interval > # will be downloaded from the station. Otherwise, specify it (in > seconds). > archive_interval = 300 > > # If possible, new archive records are downloaded from the station > # hardware. If the hardware does not support this, then new archive > # records will be generated in software. > # Set the following to "software" to force software record generation. > record_generation = hardware > > # Whether to include LOOP data in hi/low statistics > loop_hilo = True > > # The data binding used to save archive records > data_binding = wx_binding > > # Whether to log successful archive operations > log_success = True > > # Whether to log unsuccessful archive operations > log_failure = True > > > ############################################################################## > > # This section binds a data store to a database. > > [DataBindings] > > [[wx_binding]] > # The database must match one of the sections in [Databases]. > # This is likely to be the only option you would want to change. > database = archive_sqlite > # The name of the table within the database > table_name = archive > # The manager handles aggregation of data for historical summaries > manager = weewx.manager.DaySummaryManager > # The schema defines the structure of the database. > # It is *only* used when the database is created. > schema = schemas.wview_extended.schema > > > ############################################################################## > > # This section defines various databases. > > [Databases] > > # A SQLite database is simply a single file > [[archive_sqlite]] > database_name = weewx.sdb > database_type = SQLite > > # MySQL > [[archive_mysql]] > database_name = weewx > database_type = MySQL > > > ############################################################################## > > # This section defines defaults for the different types of databases. > > [DatabaseTypes] > > # Defaults for SQLite databases > [[SQLite]] > driver = weedb.sqlite > # Directory in which the database files are located > SQLITE_ROOT = /var/lib/weewx > > # Defaults for MySQL databases > [[MySQL]] > driver = weedb.mysql > # The host where the database is located > host = localhost > # The user name for logging in to the host > user = XXX obfuscated by wee_debug XXX > # The password for the user name (quotes guard against parsing > errors) > password = XXX obfuscated by wee_debug XXX > > > ############################################################################## > > # This section configures the internal weewx engine. > > [Engine] > # The following section specifies which services should be run and in > what order. > [[Services]] > prep_services = weewx.engine.StdTimeSynch > data_services = , > process_services = weewx.engine.StdConvert, > weewx.engine.StdCalibrate, weewx.engine.StdQC, > weewx.wxservices.StdWXCalculate, user.weather34.Weather34RealTime > xtype_services = weewx.wxxtypes.StdWXXTypes, > weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, > weewx.wxxtypes.StdDelta > archive_services = weewx.engine.StdArchive > restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, > weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, > user.wcloud.WeatherCloud, user.opensensemap.OpenSenseMap, > user.meteoservices.Meteoservices, user.owm.OpenWeatherMap > report_services = weewx.engine.StdPrint, weewx.engine.StdReport > > > [Forecast] > data_binding = forecast_binding > [[XTide]] > location = "Pensacola, FL" > [[Zambretti]] > hemisphere = NORTH > [[NWS]] > lid = FLZ205 > foid = MOB > [[WU]] > api_key = XXX obfuscated by wee_debug XXX > [[OWM]] > api_key = XXX obfuscated by wee_debug XXX > [[UKMO]] > api_key = XXX obfuscated by wee_debug XXX > location = INSERT_UK_LOCATION_HERE > [[Aeris]] > client_id = INSERT_AERIS_CLIENT_ID_HERE > client_secret = INSERT_AERIS_CLIENT_SECRET_HERE > [[WWO]] > api_key = XXX obfuscated by wee_debug XXX > [[DS]] > api_key = XXX obfuscated by wee_debug XXX > # > > ################################################################################ > > [Weather34RealTime] > unit_system = METRICWX > exclude_fields = rain > cache_enable = True > cache_stale_time = 900 > weewx_port = 25252 > webserver_address = "" > weewxserver_address = "" > weewx_file_transfer = "" > HTML_ROOT = "" > # > > ################################################################################ > > # Air quality, your own latitude, longitude, token and interval in seconds > are required > # Dark Sky, your own latitude, longitude, API key, language, units and > interval in seconds required > # DarkSky Units key us = US Units, ca = METRIC Units, si = METRICWX Units, > uk2 = UK(metric with mph) Units > # Example > https://api.forecast.io/forecast/yourtokenhere/51.94,-0.987?lang=en&units=uk2 > # Weather Underground, your own latitude, longitude, API key, language, > units and interval in seconds required > # Weather Underground Units key e = US, m = METRIC, s = SI(with m/s > Scandinavia), h = UK(with mph) > # Example > https://api.weather.com/v3/wx/forecast/daily/5day?geocode=51.94,-0.987&language=en&format=json&units=h&apiKey=yourapikeyhere > # Earthquake reports interval in seconds required > # K-Index reports interval in seconds required > # Metar reports airport code, API Key and interval in seconds required > # Example https://api.checkwx.com/metar/EGTK/decoded > # Example X-API-Key:yourapikeyhere > # Purpleair reports device ID and interval in seconds required > # Example https://www.purpleair.com/json?show=38365 > # Meteoalrm European weather warnings country code, region code and > interval in seconds required > # Example > http://192.168.1.232/weewx/weather34/eualert.php?country=UK®ion=013 > # Select the services you require by creating a string of the services > above > # Example services = ds.me.eq.ki.wu.aq.al.ah.ao.aa.pu > # Select your preferred time interval in seconds for each service > > [Weather34WebServices] > aq_url = > https://api.waqi.info/feed/geo:30.76837;-86.58542/?token=2ef575910d876ec2da204b68efe24624a7806de4 > aq_interval = 3600 > ds_url = https://api.forecast.io/forecast//30.76837, > -86.58542?lang=en&units= > ds_interval = 3600 > wu_url = > https://api.weather.com/v3/wx/forecast/daily/5day?geocode=30.76837, > -86.58542&language=en&format=json&units=e&apiKey=104a42c6538646858a42c65386a685d5 > wu_interval = 3600 > eq_url = https://www.emsc-csem.org/service/rss/rss.php?typ=emsc > eq_interval = 3600 > eq_xml_data = False > ki_url = > https://services.swpc.noaa.gov/products/noaa-planetary-k-index-forecast.json > ki_interval = 21600 > me_url = https://api.checkwx.com/metar//decoded > me_header = X-API-Key: > me_interval = 3600 > pu_url = https://www.purpleair.com/json?show= > pu_interval = 3600 > al_url = > http://192.168.1.115/weewx/weather34/eualert.php?country=®ion= > al_interval = 3600 > enable_uk = undefined > uk_url = > https://metoffice.gov.uk/public/data/PWSCache/WarningsRSS/Region/ > uk_interval = 3600 > uk_xml_data = undefined > services = aq.wu.eq.ki.me > # > > ################################################################################ > > # Apply your own latitude and longitude and continent to the URLs in this > section > > [Weather34CloudCover] > enable = False > db_field = signal8 > cc_interval = 300 > cc1_url = > https://api.sat24.com/crop?type=visual5hdcomplete&lat=30.76837&lon=-86.58542&width=300&height=300&zoom=1.00&continent=ana > cc2_url = > https://api.sat24.com/crop?type=infraPolair&lat=30.76837&lon=-86.58542&width=300&height=300&zoom=1.00&continent=ana > Using verbosity=1, displaying most info > > wee_debug output will be sent to stdout(console) > > Using configuration file /etc/weewx/weewx.conf > Using database binding 'wx_binding', which is bound to database > 'archive_sqlite' > > System info > Platform: Linux-6.1.21-v7+-armv7l-with-glibc2.31 > Python Version: 3.9.2 > > Load Information > 1 minute load average: 0.11 > 5 minute load average: 0.03 > 15 minute load average: 0.01 > > General Weewx info > Weewx version 4.10.2 detected. > > Station info > Station type: AcuRite > Driver: weewx.drivers.acurite > > Driver info > > Currently installed extensions > No extensions installed > > Archive info > Database name: weewx.sdb > Table name: archive > Version 4.0 > Unit system: None (Unknown unit constant) > First good timestamp: ******* N/A ******* ( N/A ) > Last good timestamp: ******* N/A ******* ( N/A ) > Number of records: None (no archive records found) > It is likely that the database (weewx.sdb) archive > table (archive) > exists but contains no data. > weewx (weewx.conf) is set to use an archive interval of 300 seconds. > The station hardware was not interrogated in determining archive > interval. > > Databases configured in weewx.conf > Database name: weewx.sdb > Database driver: weedb.sqlite > > Database name: weewx > Database driver: weedb.mysql > Database host: localhost > > > Parsed and obfuscated weewx.conf > > wee_debug report successfully generated > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/440fe476-d528-4d8d-9d31-9a25dc330870n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/440fe476-d528-4d8d-9d31-9a25dc330870n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEBs9zTu68_CenLeB%2BYiazDwsRwThG4nyPRSUwVL72Y9jA%40mail.gmail.com.
