debian 7 was end-of-life over 5 years ago and is no longer getting security updates. You should build a new SD card with a current RaspiOS on it, which will have python3 there by default. Reinstall everything you have added to your current os onto the new SD card.
Once you have the new SD using weewx and python3 you will meet the prerequisites for the airlink extension. On Friday, June 30, 2023 at 4:51:33 AM UTC-7 Yves Martin wrote: > Hi Vince, > > What I'm looking for is to ingrate pertinent information about "Air > Quality" on my Meteo Station. If there is a third party extension doing it, > I will take it! > If I have to upgrade Python to version 3.x, I will do it too (but I need > to know how... and what is the impact of my actual setting). > If there is an easy way to do it, this is perfect! ;) > > Actually I"m using Debian 7.11 with Python 2.7.3 > > Regards, > > Yves, > YMartin.com/meteo > > Le jeudi 29 juin 2023 à 18 h 34 min 42 s UTC-4, vince a écrit : > >> Not sure what you're looking for in terms of an answer here. Yes there >> is a third-party extension if you attempt to look for it even minimally. >> Yes it requires a modern python version. Yes there is an easy way to >> integrate it. Install and configure that extension like you would do with >> any other extension. >> >> On Thursday, June 29, 2023 at 1:24:13 PM UTC-7 Yves Martin wrote: >> >>> Hi Vince, >>> >>> I'm using the "Davis Air Quality Sensor" with my phone (Installed here >>> http://45.73.0.50:8080/v1/current_conditions) >>> Here is the information about the device: >>> https://www.davisinstruments.com/pages/airlink >>> >>> I am looking to integrate this sensor to my meteo station ... >>> (YMartin.com/meteo) >>> I'm using a Davis Vantage Pro2 since a while now, and with weewx it >>> works very well since 2014. >>> >>> I already asked here if something exists for this Air Quality Sensor, >>> and I get an answer that I have to upgrade my version (3.9.2 to 4.x.x) and >>> perhaps upgrade also my Python version too and the device was already >>> supported (I did not find this in the documentation). >>> >>> I've set another Raspberry Pi with Debian 10 and Python 3.9 ... but >>> before I change and transfert the data to the new plateform, I would like >>> to know if there is an easy way to integrate this sensor to weewx? >>> >>> Regards, >>> >>> Yves >>> YMartin.com/meteo >>> >>> Le jeudi 29 juin 2023 à 16 h 09 min 52 s UTC-4, vince a écrit : >>> >>>> What have you searched for ? >>>> (hint - try some searches) >>>> >>>> I would be surprised if anything modern works with python2... >>>> >>>> On Thursday, June 29, 2023 at 1:00:35 PM UTC-7 Yves Martin wrote: >>>> >>>>> >>>>> 15 h 58 (maintenant) >>>>> >>>>> >>>>> >>>>> Hi, >>>>> >>>>> Is the Devis "Air Quality Sensor" is natively supported in the last >>>>> version of weewx? (4.9.1) >>>>> >>>>> I'm using Python 2.7.3 (I've heard I will need Python 3...)? >>>>> >>>>> I've added a link to my meteo station and I will be happy to get the >>>>> data and add these information in my meteo station. With the poor Air >>>>> quality we had in Montreal in the last days, it will be important to >>>>> share >>>>> this information. (http://45.73.0.50:8080/v1/current_conditions) >>>>> >>>>> Yves, >>>>> YMartin.com/meteo >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b2ea78a1-7ae6-4cc7-9050-39c0875b0d2cn%40googlegroups.com.
