Hi Vince, This is already done (new Raspberry Pi 10 with Python 3.9) ... but how to transfert all to the new one? If I copy all from one to the new one, is weewx will work under Python3?
(/usr/share/, /var/, /etc/ directories etc...) Yves Le vendredi 30 juin 2023 à 15 h 40 min 20 s UTC-4, vince a écrit : > debian 7 was end-of-life over 5 years ago and is no longer getting > security updates. You should build a new SD card with a current RaspiOS on > it, which will have python3 there by default. Reinstall everything you > have added to your current os onto the new SD card. > > Once you have the new SD using weewx and python3 you will meet the > prerequisites for the airlink extension. > > On Friday, June 30, 2023 at 4:51:33 AM UTC-7 Yves Martin wrote: > >> Hi Vince, >> >> What I'm looking for is to ingrate pertinent information about "Air >> Quality" on my Meteo Station. If there is a third party extension doing it, >> I will take it! >> If I have to upgrade Python to version 3.x, I will do it too (but I need >> to know how... and what is the impact of my actual setting). >> If there is an easy way to do it, this is perfect! ;) >> >> Actually I"m using Debian 7.11 with Python 2.7.3 >> >> Regards, >> >> Yves, >> YMartin.com/meteo >> >> Le jeudi 29 juin 2023 à 18 h 34 min 42 s UTC-4, vince a écrit : >> >>> Not sure what you're looking for in terms of an answer here. Yes there >>> is a third-party extension if you attempt to look for it even minimally. >>> Yes it requires a modern python version. Yes there is an easy way to >>> integrate it. Install and configure that extension like you would do with >>> any other extension. >>> >>> On Thursday, June 29, 2023 at 1:24:13 PM UTC-7 Yves Martin wrote: >>> >>>> Hi Vince, >>>> >>>> I'm using the "Davis Air Quality Sensor" with my phone (Installed here >>>> http://45.73.0.50:8080/v1/current_conditions) >>>> Here is the information about the device: >>>> https://www.davisinstruments.com/pages/airlink >>>> >>>> I am looking to integrate this sensor to my meteo station ... >>>> (YMartin.com/meteo) >>>> I'm using a Davis Vantage Pro2 since a while now, and with weewx it >>>> works very well since 2014. >>>> >>>> I already asked here if something exists for this Air Quality Sensor, >>>> and I get an answer that I have to upgrade my version (3.9.2 to 4.x.x) and >>>> perhaps upgrade also my Python version too and the device was already >>>> supported (I did not find this in the documentation). >>>> >>>> I've set another Raspberry Pi with Debian 10 and Python 3.9 ... but >>>> before I change and transfert the data to the new plateform, I would like >>>> to know if there is an easy way to integrate this sensor to weewx? >>>> >>>> Regards, >>>> >>>> Yves >>>> YMartin.com/meteo >>>> >>>> Le jeudi 29 juin 2023 à 16 h 09 min 52 s UTC-4, vince a écrit : >>>> >>>>> What have you searched for ? >>>>> (hint - try some searches) >>>>> >>>>> I would be surprised if anything modern works with python2... >>>>> >>>>> On Thursday, June 29, 2023 at 1:00:35 PM UTC-7 Yves Martin wrote: >>>>> >>>>>> >>>>>> 15 h 58 (maintenant) >>>>>> >>>>>> >>>>>> >>>>>> Hi, >>>>>> >>>>>> Is the Devis "Air Quality Sensor" is natively supported in the last >>>>>> version of weewx? (4.9.1) >>>>>> >>>>>> I'm using Python 2.7.3 (I've heard I will need Python 3...)? >>>>>> >>>>>> I've added a link to my meteo station and I will be happy to get the >>>>>> data and add these information in my meteo station. With the poor Air >>>>>> quality we had in Montreal in the last days, it will be important to >>>>>> share >>>>>> this information. (http://45.73.0.50:8080/v1/current_conditions) >>>>>> >>>>>> Yves, >>>>>> YMartin.com/meteo >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8c4c04f9-9fd5-4436-8320-be625c95afd5n%40googlegroups.com.
