Good morning, I previously used weeWX connected to the USB output of my weather station. No problem, the station was well referenced on the world map of WeeWX weather stations.
Unfortunately my station broke down and an exchange was carried out under warranty with a new station without a USB port. This station sends data to AWEKAS. I was therefore forced to modify everything, to stop the WeeWX daemon permanently, to automatically retrieve the data from the AWEKAS site every 5 minutes, save it in CSV format and run wee_import at the same frequency to update my weewx.sdb database and generate all the graphics, html pages etc... It works perfectly EXCEPT that my weather station is no longer referenced on the WeeWX map! :-( Is there a way to reference it again although only using wee_import (which nevertheless uses the weewx.conf configuration file)? Thank you... -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1b7247b6-4b94-4ff4-8160-006f54faff2fn%40googlegroups.com.
