I am having trouble getting weewx to connect to my WeatherLink Live ethernet box. I am able to connect to the WeatherLink Live using a browser and also using netcat to port 22222 from the raspberry pi I have weewx installed on. Here is the error. Any help would be appreciated.
Jan 21 13:51:26 rpi-blue weewxd[12964]: INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage) Jan 21 13:51:26 rpi-blue weewxd[12964]: ERROR weewx.drivers.vantage: Socket error while opening port 22222 to ethernet host 10.0.1.180. Jan 21 13:51:26 rpi-blue weewxd[12964]: ERROR weewx.engine: Import of driver failed: [Errno 111] Connection refused (<class 'weewx.WeeWxIOError'>) I am able to connect to weatherlink live box using the link http://10.0.1.180:80/v1/current_conditions and see data in my browser. I can also connect to the weatherlink live with netcat from the raspberry pi that I have weewx installed on. *pi@rpi-blue*:*~ $* nc -nvulp 22222 Bound on 0.0.0.0 22222 Connection received on 10.0.1.180 43539 {"did":"001D0A712868","ts":1705869635,"conditions":[{"lsid":326721,"data_structure_type":1,"txid":1,"wind_speed_last":4.00,"wind_dir_last":207,"rain_size":1,"rain_rate_last":0,"rain_15_min":0,"rain_60_min":0,"rain_24_hr":28,"rain_storm":28,"rain_storm_start_at":1705832820,"rainfall_daily":28,"rainfall_monthly":54,"rainfall_year":54,"wind_speed_hi_last_10_min":10.00,"wind_dir_at_hi_speed_last_10_min":244}]}^C My weewx.config contains the following: ############################################################################## [Vantage] # This section is for the Davis Vantage series of weather stations. # Connection type: serial or ethernet # serial (the classic VantagePro) # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) type = ethernet # If the connection type is serial, a port must be specified: # Debian, Ubuntu, Redhat, Fedora, and SuSE: # /dev/ttyUSB0 is a common USB port name # /dev/ttyS0 is a common serial port name # BSD: # /dev/cuaU0 is a common serial port name port = /dev/ttyUSB0 # If the connection type is ethernet, an IP Address/hostname is required: host = 10.0.1.180 ###################################################### # The rest of this section rarely needs any attention. # You can safely leave it "as is." ###################################################### # Serial baud rate (usually 19200) baudrate = 19200 # TCP port (when using the WeatherLinkIP) tcp_port = 22222 # TCP send delay (when using the WeatherLinkIP): tcp_send_delay = 0.5 # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both loop_request = 1 # The id of your ISS station (usually 1). If you use a wind meter connected # to a anemometer transmitter kit, use its id iss_id = 1 # How long to wait for a response from the station before giving up (in # seconds; must be greater than 2) timeout = 4 # How long to wait before trying again (in seconds) wait_before_retry = 1.2 # How many times to try before giving up: max_tries = 4 # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 model_type = 2 # The driver to use: driver = weewx.drivers.vantage ############################################################################## -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/be1b9b26-1de2-467c-91a6-0d11911bc97dn%40googlegroups.com.
