Ok;.. Va pour la version FR. 1/ Dans le paquet généré il y a bien un "soil_most2" mais je ne vois pas de "soil_moist1". Dans le RAW c'est la même chose : 'soil_moisture_2' mais pas vu de 'soil_moisture_1' Avant d'aller plus loin, il y a peut-être déjà là quelque chose à regarder qui ne marche pas bien... ?
2/ Dans la config de weewx, une fois résolu le point 1/, dans la section [interceptor], j'aurais tendance à essayer la chose suivante : [Interceptor] driver = user.interceptor device_type = xxxxx ... [[sensor_map_extensions]] ... extraTemp1 = soil_temperature_1 extraTemp2 = soil_temperature_2 extraHumid1 = soil_moisture_1 extraHumid2 = soil_moisture_2 3/ Si vous avez des sondes de température et hygrométrie *de sol*, ok pas de problème. En revanche si vous avez des sondes de température extérieures indiquant la température et l'hygrométrie de l'air ambiant, c'est curieux que le nom récupéré soit "soil_xxx". Mais comme je vous l'indiquais, sur Awekas, quand je récupère via l'API les données envoyées par la base Bresser, les températures des sondes extérieures sont dans les bons champs, en revanche les hygrométries sont rentrées dans des hygrométries de sonde de sol.. C'est très curieux, et dixit le SAV de Bresser France, je ne suis pas le seul à avoir signalé la chose ! Côté Bresser "teutons", la chose ne semble pas trop leur poser de problème métaphysiques... A moins que la modification du firmware de la base de la station ne soit pas une de leurs priorités ! *Rémy LAVABRE* Le sam. 24 févr. 2024 à 10:54, sc.lep...@gmail.com <sc.leprov...@gmail.com> a écrit : > Hello Remy (... et bonjour en Français :) > On va le faire en Français c'est plus simple : > je récupère les data via interceptor en Wifi sur Weewx ... Toutes mes > datas je les récupère correctement. > la valeur inTemp est celle de la base ca ok . > mais j'ai 2 sondes en plus et je voudrais également récupérer ces > données (soilTemp1 et soilTemp2) et ma question était comment paramétrer > le driver interceptor > Sur le repo github ce n'est pas très clair... > > Mon site est ici : https://meteo-pontscorff.fr/ (il y a mes coordonnées > mail) > Merci ! > Stéphane > > Le samedi 24 février 2024 à 05:49:39 UTC+1, Remy LAVABRE a écrit : > >> stephane hello, >> I said something stupid to you previously. interceptor intercepts at the >> wifi level and not as I thought at the 400 or 800 Mhz radio level... sorry! >> >> so normal that you have inTemp and barometer! :-) >> >> I too have a Bresser station and retrieve data automatically from Awekas >> in the absence of a USB output. I have several exterior sensors and there >> is a somewhat similar problem. the hygrometer values of the probes are >> retrieved as hygrometer values of the floor probes while the temperatures >> are retrieved as temperatures of external probes. >> >> I reported this anomaly to Bresser in France who already reported it >> almost a year ago, knowing that I was not the only one to have reported it >> to them. >> I also reported the problem to Germany who basically told me it was >> "normal" operation without explanation.... >> >> As I wrote a driver for weewx which retrieves data directly from Awekas >> at regular intervals, I reverse the value fields myself... >> >> Le ven. 23 févr. 2024, 23:19, sc.lep...@gmail.com <sc.lep...@gmail.com> >> a écrit : >> >>> Hello >>> I use weewx with interceptor : >>> >>> Feb 23 23:09:01 meteo-Ubuntu weewx-BRESSER[63190] DEBUG >>> user.interceptor: raw packet: {'dateTime': 1708726142, 'usUnits': 1, >>> 'rain_total': 0.09, 'barometer': 29.99, 'temperature_out': 34.7, >>> 'humidity_out': 90.0, 'wind_speed': 0.0, 'wind_gust': 0.0, 'wind_dir': >>> 138.0, 'dewpoint': 32.0, 'temperature_in': 66.2, 'humidity_in': 57.0, 'uv': >>> 0.0, 'solar_radiation': 0.0, 'soil_temperature_1': 66.2, >>> 'soil_temperature_2': 70.8, 'soil_moisture_2': 60.0, 'rain': None} >>> Feb 23 23:09:01 meteo-Ubuntu weewx-BRESSER[63190] DEBUG >>> user.interceptor: mapped packet: {'dateTime': 1708726142, 'usUnits': 1, >>> 'barometer': 29.99, 'outHumidity': 90.0, 'inHumidity': 57.0, 'outTemp': >>> 34.7, 'inTemp': 66.2, 'windSpeed': 0.0, 'windGust': 0.0, 'windDir': 138.0, >>> 'radiation': 0.0, 'dewpoint': 32.0, 'rain': None, 'UV': 0.0, 'soilTemp1': >>> 66.2, 'soilTemp2': 70.8, 'soilMoist2': 60.0} >>> >>> I dont understand how to use : >>> soilTemp1': 66.2, ' >>> soilTemp2': 70.8, ' >>> soil_moist1': 60.0, >>> soil_moist2': 60.0, >>> >>> I've 2 temperatures probes >>> >>> Can someone explain me how to add this in weewx.conf ? >>> >>> in section : >>> [[sensor_map_extensions]] >>> ??? inTemp = temperature_1 >>> ??? inHumidity = humidity_1 >>> ??? outTemp = temperature_4 >>> ??? outHumidity = humidity_4 >>> >>> >>> Thanks a lot ;) >>> >>> Stephane >>> >>> -- >>> >> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/c851119a-b274-4ecd-99a3-605d2e393946n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/c851119a-b274-4ecd-99a3-605d2e393946n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/b81baf0d-7454-403b-86c3-5cd1305b6fcdn%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/b81baf0d-7454-403b-86c3-5cd1305b6fcdn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CADhm9YdatD7pDuaG%2BKs0DJu%3DDvaV-66QyD_m9v%2BEbUz4%2BRuQJg%40mail.gmail.com.