> What are 'all' the commands you executed ? Are you serious? I've been working on this for hours.
> You should not need to 'change the location inside that script' if you are following the instructions correctly. I followed the pip install to the letter. See the commands I listed post before last. > are you installing v5 pip on a clean no-weewx system ? Read the thread. I took michael.k's suggestion. > are you upgrading a v4 setup to v5 pip ? Read the thread. I said "I installed weewx long ago (10 yrs?). It is version 4.10.2" > are you upgrading a v4 dpkg to a v5 pip ? The subject of the thread is "want to upgrade to 5.0, don't know original install method" > People have done hundreds (thousands?) of pip installations by now. And none had any problems. On Monday, June 24, 2024 at 6:14:39 PM UTC-7 vince wrote: > Mark you're going to have to be much less concise please. What are 'all' > the commands you executed ? What does the output look like end to end ? > > What exactly are you doing ? > > - are you installing v5 pip on a clean no-weewx system ? > - or are you upgrading a v4 setup to v5 pip ? > - or are you upgrading a v4 dpkg to a v5 pip ? > > You should not need to 'change the location inside that script' if you are > following the instructions correctly. You have to be doing something > different or missing a step or several. People have done hundreds > (thousands?) of pip installations by now. > > Lets take a step back and please tell us where you're starting, what > you've done step-by-step, and what each step's output looked like. > > > On Monday, June 24, 2024 at 5:26:07 PM UTC-7 Mark Hahn wrote: > >> I did ... >> # Create the virtual environment python3 -m venv ~/weewx-venv # Activate >> the WeeWX virtual environment source ~/weewx-venv/bin/activate # Install >> WeeWX into the virtual environment python3 -m pip install weewx >> >> On Monday, June 24, 2024 at 5:23:27 PM UTC-7 Mark Hahn wrote: >> >>> > Activate the venv first >>> I followed the pip instructions carefully so I'm 99% sure I did "source >>> ~/weewx-venv/bin/activate". >>> >>> On Monday, June 24, 2024 at 5:04:16 PM UTC-7 vince wrote: >>> >>>> You used pip. Activate the venv first. Always. >>>> >>>> On Monday, June 24, 2024 at 5:01:38 PM UTC-7 Mark Hahn wrote: >>>> >>>>> As suggested I did a separate install using pip. It was very quick. >>>>> "weectl device --clear-memory" fixed my davis problem. >>>>> >>>>> I decided to run the new 5.0. I copied over the conf file. I didn't >>>>> need to copy the db file. Weewxd works great. >>>>> >>>>> But now I want to run it as a daemon. The pip install instructions >>>>> said to use "sh ~/weewx-data/scripts/setup-daemon.sh". I couldn't >>>>> run this because weewx-data is in the .env folder, not in root. I went >>>>> to >>>>> the weewx-data in .env and ran /setup-daemon.sh. I had to change the >>>>> location inside that script to also use weewx-data in .env. >>>>> >>>>> The daemon install gave no errors but when I run "systemctl start >>>>> weewx" I get this error ... >>>>> >>>>> /etc/systemd/system/weewx.service:12: Executable "WEEWX_PYTHON" not >>>>> found in path >>>>> "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" >>>>> weewx.service: Unit configuration has fatal error, unit will not be >>>>> started. >>>>> >>>>> Can anyone tell me how to fix this? Meanwhile I'll run in not as a >>>>> daemon but obviously I've got to fix this. >>>>> On Monday, June 24, 2024 at 11:49:27 AM UTC-7 [email protected] >>>>> wrote: >>>>> >>>>>> >>>>>> I'd recommend you to leave your old installation untouched, install >>>>>> weewx5 the pip way in a venv together with your extensions, a copy of >>>>>> your >>>>>> database and config and see if it works out. When the new installation >>>>>> works as desired, just switch. >>>>>> Mark Hahn schrieb am Montag, 24. Juni 2024 um 20:10:20 UTC+2: >>>>>> >>>>>>> I should say that I want to upgrade to get commands like "weectl >>>>>>> device --dump". Are there equivalent commands in 4.10.2? I need >>>>>>> those >>>>>>> commands to follow instructions in " Troubleshooting the Davis >>>>>>> Vantage station" page of wiki. My other post here about my davis >>>>>>> troubles >>>>>>> is at https://groups.google.com/g/weewx-user/c/DMByZT6hyFM. >>>>>>> >>>>>>> On Monday, June 24, 2024 at 11:05:06 AM UTC-7 Mark Hahn wrote: >>>>>>> >>>>>>>> I installed weewx long ago (10 yrs?). It is version 4.10.2. I >>>>>>>> don't have any idea how I installed it. The is nothing related to >>>>>>>> weewx in >>>>>>>> my /root directory. The is no weewx directory in /home. >>>>>>>> >>>>>>>> Any ideas on how I should upgrade to 5.0? Also, are there breaking >>>>>>>> changes from 4.10.2 to 5.0? >>>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/6416d428-0cc2-47f4-9b56-ee12f6e62a7en%40googlegroups.com.
