"Activate the venv first. Always." Means: "Activate the specifific venv everytime, you want to run a command for the specific installation in the venv."
Mark Hahn schrieb am Dienstag, 25. Juni 2024 um 03:48:26 UTC+2: > > What are 'all' the commands you executed ? > Are you serious? I've been working on this for hours. > > > You should not need to 'change the location inside that script' if you > are following the instructions correctly. > I followed the pip install to the letter. See the commands I listed post > before last. > > > are you installing v5 pip on a clean no-weewx system ? > Read the thread. I took michael.k's suggestion. > > > are you upgrading a v4 setup to v5 pip ? > Read the thread. I said "I installed weewx long ago (10 yrs?). It is > version 4.10.2" > > > are you upgrading a v4 dpkg to a v5 pip ? > The subject of the thread is "want to upgrade to 5.0, don't know original > install method" > > > People have done hundreds (thousands?) of pip installations by now. > And none had any problems. > > On Monday, June 24, 2024 at 6:14:39 PM UTC-7 vince wrote: > >> Mark you're going to have to be much less concise please. What are >> 'all' the commands you executed ? What does the output look like end to >> end ? >> >> What exactly are you doing ? >> >> - are you installing v5 pip on a clean no-weewx system ? >> - or are you upgrading a v4 setup to v5 pip ? >> - or are you upgrading a v4 dpkg to a v5 pip ? >> >> You should not need to 'change the location inside that script' if you >> are following the instructions correctly. You have to be doing something >> different or missing a step or several. People have done hundreds >> (thousands?) of pip installations by now. >> >> Lets take a step back and please tell us where you're starting, what >> you've done step-by-step, and what each step's output looked like. >> >> >> On Monday, June 24, 2024 at 5:26:07 PM UTC-7 Mark Hahn wrote: >> >>> I did ... >>> # Create the virtual environment python3 -m venv ~/weewx-venv # >>> Activate the WeeWX virtual environment source ~/weewx-venv/bin/activate # >>> Install WeeWX into the virtual environment python3 -m pip install weewx >>> >>> On Monday, June 24, 2024 at 5:23:27 PM UTC-7 Mark Hahn wrote: >>> >>>> > Activate the venv first >>>> I followed the pip instructions carefully so I'm 99% sure I did "source >>>> ~/weewx-venv/bin/activate". >>>> >>>> On Monday, June 24, 2024 at 5:04:16 PM UTC-7 vince wrote: >>>> >>>>> You used pip. Activate the venv first. Always. >>>>> >>>>> On Monday, June 24, 2024 at 5:01:38 PM UTC-7 Mark Hahn wrote: >>>>> >>>>>> As suggested I did a separate install using pip. It was very quick. >>>>>> "weectl device --clear-memory" fixed my davis problem. >>>>>> >>>>>> I decided to run the new 5.0. I copied over the conf file. I didn't >>>>>> need to copy the db file. Weewxd works great. >>>>>> >>>>>> But now I want to run it as a daemon. The pip install instructions >>>>>> said to use "sh ~/weewx-data/scripts/setup-daemon.sh". I couldn't >>>>>> run this because weewx-data is in the .env folder, not in root. I went >>>>>> to >>>>>> the weewx-data in .env and ran /setup-daemon.sh. I had to change the >>>>>> location inside that script to also use weewx-data in .env. >>>>>> >>>>>> The daemon install gave no errors but when I run "systemctl start >>>>>> weewx" I get this error ... >>>>>> >>>>>> /etc/systemd/system/weewx.service:12: Executable "WEEWX_PYTHON" not >>>>>> found in path >>>>>> "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" >>>>>> weewx.service: Unit configuration has fatal error, unit will not be >>>>>> started. >>>>>> >>>>>> Can anyone tell me how to fix this? Meanwhile I'll run in not as a >>>>>> daemon but obviously I've got to fix this. >>>>>> On Monday, June 24, 2024 at 11:49:27 AM UTC-7 [email protected] >>>>>> wrote: >>>>>> >>>>>>> >>>>>>> I'd recommend you to leave your old installation untouched, install >>>>>>> weewx5 the pip way in a venv together with your extensions, a copy of >>>>>>> your >>>>>>> database and config and see if it works out. When the new installation >>>>>>> works as desired, just switch. >>>>>>> Mark Hahn schrieb am Montag, 24. Juni 2024 um 20:10:20 UTC+2: >>>>>>> >>>>>>>> I should say that I want to upgrade to get commands like "weectl >>>>>>>> device --dump". Are there equivalent commands in 4.10.2? I need >>>>>>>> those >>>>>>>> commands to follow instructions in " Troubleshooting the Davis >>>>>>>> Vantage station" page of wiki. My other post here about my davis >>>>>>>> troubles >>>>>>>> is at https://groups.google.com/g/weewx-user/c/DMByZT6hyFM. >>>>>>>> >>>>>>>> On Monday, June 24, 2024 at 11:05:06 AM UTC-7 Mark Hahn wrote: >>>>>>>> >>>>>>>>> I installed weewx long ago (10 yrs?). It is version 4.10.2. I >>>>>>>>> don't have any idea how I installed it. The is nothing related to >>>>>>>>> weewx in >>>>>>>>> my /root directory. The is no weewx directory in /home. >>>>>>>>> >>>>>>>>> Any ideas on how I should upgrade to 5.0? Also, are there >>>>>>>>> breaking changes from 4.10.2 to 5.0? >>>>>>>>> >>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b8d97ca2-6144-4c6c-a70b-06a4c9ad73c4n%40googlegroups.com.
