Hi,
I was able to update the confi file and change the Debug to 1...which in
itself is a huge win as it took me a while to figure out how to even access
the file. (permissions have been a bear to learn). I have read a lot in
the last 24 hours!
That said, I still don't know how to access any additional log
information. When I run the status check, it comes back with basically the
same info...
× weewx.service - WeeWX
Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset:
enabled)
Active: failed (Result: exit-code) since Sun 2025-02-02 11:35:11 EST;
23min ago
Duration: 18min 49.054s
Docs: https://weewx.com/docs
Process: 1261 ExecStart=weewxd /etc/weewx/weewx.conf (code=exited,
status=4)
Main PID: 1261 (code=exited, status=4)
CPU: 873ms
Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: **** File
"/usr/share/weewx/weewx/drivers/vantage.py", line 1444, in _setup
Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
self.hardware_type = self._determine_hardware()
Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
^^^^^^^^^^^^^^^^^^^^^^^^^^
Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: **** File
"/usr/share/weewx/weewx/drivers/vantage.py", line 1435, in
_determine_hardware
Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
raise weewx.WeeWxIOError("Unable to read hardware type")
Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
weewx.WeeWxIOError: Unable to read hardware type
Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: Unable to load
driver: Unable to read hardware type
Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: **** Exiting...
Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Main process exited,
code=exited, status=4/NOPERMISSION
Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Failed with result
'exit-code'.
~
Thanks
Scott
On Saturday, February 1, 2025 at 10:51:51 PM UTC-5 John Kline wrote:
> If you set debug = 1 and restart weewx, we’ll get to see the hardware_type
> read from the envoy.
> The line in the log will contain “Hardware type is “
>
> On Feb 1, 2025, at 6:34 PM, scott pierce <[email protected]> wrote:
>
> Successfully installed WeeWX on Rpi 5 and it's ingesting data from Davis
> Envoy USB Weather Link data logger.
>
> Also, I have been able to view reports...so that's nice.
> I'm just beginning this journey so still a lot to learn and set up.
> One quick question I can't find an answer to in the group or in notes...
> when I run a status check this is the result...
> × weewx.service - WeeWX
> Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset:
> enabled)
> Active: failed (Result: exit-code) since Sat 2025-02-01 21:18:12 EST;
> 7min ago
> Duration: 35min 33.415s
> Docs: https://weewx.com/docs
> Process: 6313 ExecStart=weewxd /etc/weewx/weewx.conf (code=exited,
> status=4)
> Main PID: 6313 (code=exited, status=4)
> CPU: 2.339s
>
> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine: ****
> log.debug("Hardware name: %s", self.hardware_name)
> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine: ****
> ^^^^^^^^^^^^^^^^^^
> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine: ****
> File "/usr/share/weewx/weewx/drivers/vantage.py", line 1416, in
> hardware_name
> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine: ****
> raise weewx.UnsupportedFeature("Unknown hardware type %d" %
> self.hardware_type)
> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine: ****
> weewx.UnsupportedFeature: Unknown hardware type 10
> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: Unable to load
> driver: Unknown hardware type 10
> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: **** Exiting...
> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Main process exited,
> code=exited, status=4/NOPERMISSION
> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Failed with result
> 'exit-code'.
> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Consumed 2.339s CPU time.
>
> I'm guessing I put the hardware name in wrong in setup...not sure. Also
> don't know where to look to check.
> Any suggestions are appreciated.
> Thanks
> Scott
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion visit
> https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/9f9947c3-8267-468f-98a7-6ec16ff29037n%40googlegroups.com.
