scott@spi-1:/etc/weewx $ sudo lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 045e:07f8 Microsoft Corp. Wired Keyboard 600 (model
1576)
Bus 003 Device 002: ID 046d:c077 Logitech, Inc. Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 10c4:ea61 Silicon Labs CP210x UART Bridge
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Does this help?
On Sunday, February 2, 2025 at 7:09:27 PM UTC-5 vince wrote:
> Sure it could, try “lsusb” to list the usb devices found. You might need
> to preface it with sudo. Alternately unplug it, wait a couple seconds,
> plug it back in and run “sudo dmesg” to see kernel messages that usually
> have enough info to figure it out.
>
> On Sunday, February 2, 2025 at 4:01:50 PM UTC-8 scott pierce wrote:
>
>> Ran the journal log and it produced this:
>>
>> Feb 01 16:48:38 scott systemd[1]: Started weewx.service - WeeWX.
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Initializing weewxd
>> version 5.1.0
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Command line:
>> /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Using Python: 3.11.2
>> (main, Nov 30 2024, 21:22:50) [GCC 12.2.0]
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Located at:
>> /usr/bin/python3
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Platform:
>> Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Locale:
>> 'en_US.UTF-8'
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Entry path:
>> /usr/share/weewx/weewxd.py
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: WEEWX_ROOT:
>> /etc/weewx
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Config file:
>> /etc/weewx/weewx.conf
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: User module:
>> /etc/weewx/bin/user
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Debug: 0
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: User: weewx
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Group: weewx
>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Groups: weewx
>> Feb 01 16:48:38 scott weewxd[3395]: INFO weewx.engine: Loading station
>> type Vantage (weewx.drivers.vantage)
>> Feb 01 16:48:38 scott weewxd[3395]: ERROR weewx.engine: Import of driver
>> failed: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file
>> or directory: '/dev/ttyUSB0' (<class 'serial.serialutil.SerialException'>)
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> Traceback (most recent call last):
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> File "/usr/lib/python3/dist-packages/serial/serialposix.py", line 322, in
>> open
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> FileNotFoundError: [Errno 2] No such file or directory: '/dev/ttyUSB0'
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> During handling of the above exception, another exception occurred:
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> Traceback (most recent call last):
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/engine.py", line 115, in setupStation
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> self.console = loader_function(config_dict, self)
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 32, in loader
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> return VantageService(engine, config_dict)
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 2046, in __init__
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> Vantage.__init__(self, **config_dict[DRIVER_NAME])
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 536, in __init__
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> self.port.openPort()
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 319, in openPort
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> self.serial_port = serial.Serial(self.port, self.baudrate,
>> timeout=self.timeout)
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> File "/usr/lib/python3/dist-packages/serial/serialutil.py", line 244, in
>> __init__
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> self.open()
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> File "/usr/lib/python3/dist-packages/serial/serialposix.py", line 325, in
>> open
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> raise SerialException(msg.errno, "could not open port {}:
>> {}".format(self._port, msg))
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>> serial.serialutil.SerialException: [Errno 2] could not open port
>> /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL __main__: Unable to load
>> driver: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file
>> or directory: '/dev/ttyUSB0'
>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL __main__: ****
>> Exiting...
>> Feb 01 16:48:38 scott systemd[1]: weewx.service: Main process exited,
>> code=exited, status=4/NOPERMISSION
>> Feb 01 16:48:38 scott systemd[1]: weewx.service: Failed with result
>> 'exit-code'.
>> Feb 01 20:26:36 spi-1 systemd[1]: Started weewx.service - WeeWX.
>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Initializing weewxd
>> version 5.1.0
>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Command line:
>> /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Using Python: 3.11.2
>> (main, Nov 30 2024, 21:22:50) [GCC 12.2.0]
>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Located at:
>> /usr/bin/python3
>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Platform:
>> Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Locale:
>> 'en_US.UTF-8'
>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Entry path:
>> /usr/share/weewx/weewxd.py
>> lines 1-56
>>
>> *To an uneducated brain, this looks like a problem with the driver for
>> the USB data logger from the Envoy. I have NO idea what port the USB is
>> going to on the Rpi so I just selected "the most common" option in the auto
>> install process. Could this be the issue?*
>> *Thanks*
>> *Scott*
>>
>>
>> On Sunday, February 2, 2025 at 6:22:56 PM UTC-5 scott pierce wrote:
>>
>>> Here is what I have:
>>> scott@spi-1:~ $ groups
>>> scott adm dialout cdrom sudo audio video plugdev games users input
>>> render netdev lpadmin weewx gpio i2c spi
>>> scott@spi-1:~ $
>>>
>>> and
>>>
>>> scott@spi-1:~ $ groups weewx
>>> weewx : weewx
>>>
>>>
>>> On Sunday, February 2, 2025 at 4:10:06 PM UTC-5 vince wrote:
>>>
>>>> weewx.service: Main process exited, code=exited, status=4/NOPERMISSION
>>>> generally means the user running the command is not in the required unix
>>>> groups, which can be a little tricky to get right especially as a new
>>>> linuc
>>>> user.
>>>>
>>>> Try ‘groups’ to see which groups your account is in, and ‘groups weewx’
>>>> to see which groups the weewx user is in. Your shell prompt is a bit
>>>> unusual so I can’t see which account you are using in your log excerpts.
>>>> On Sunday, February 2, 2025 at 12:15:45 PM UTC-8 scott pierce wrote:
>>>>
>>>>> *and here are the results when I run weectl device...still showing an
>>>>> unknown hardware issue:*
>>>>>
>>>>> @-1:~ $ weectl device
>>>>> Using configuration file /etc/weewx/weewx.conf
>>>>> Using driver weewx.drivers.vantage.
>>>>> Using Vantage driver version 3.6.2 (weewx.drivers.vantage)
>>>>> Unable to wake up console... sleeping
>>>>> Unable to wake up console... retrying
>>>>> Traceback (most recent call last):
>>>>> File "/usr/share/weewx/weectl.py", line 75, in <module>
>>>>> main()
>>>>> File "/usr/share/weewx/weectl.py", line 42, in main
>>>>> weectllib.device_actions.device()
>>>>> File "/usr/share/weewx/weectllib/device_actions.py", line 91, in
>>>>> device
>>>>> configurator.configure(config_dict)
>>>>> File "/usr/share/weewx/weewx/drivers/__init__.py", line 71, in
>>>>> configure
>>>>> self.do_options(options, parser, config_dict, not options.noprompt)
>>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 2238, in
>>>>> do_options
>>>>> station = Vantage(**config_dict[DRIVER_NAME])
>>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 540, in
>>>>> __init__
>>>>>
>>>>> log.debug("Hardware name: %s", self.hardware_name)
>>>>> ^^^^^^^^^^^^^^^^^^
>>>>>
>>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 1416, in
>>>>> hardware_name
>>>>> raise weewx.UnsupportedFeature("Unknown hardware type %d" %
>>>>> self.hardware_type)
>>>>> weewx.UnsupportedFeature: Unknown hardware type 10
>>>>> @1:~ $
>>>>>
>>>>> On Sunday, February 2, 2025 at 3:10:39 PM UTC-5 scott pierce wrote:
>>>>>
>>>>>> *Here is the info that came through after running weectl debug:*
>>>>>>
>>>>>> System info
>>>>>> Platform: Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
>>>>>> Python Version: 3.11.2
>>>>>>
>>>>>> Load Information
>>>>>> 1 minute load average: 0.00
>>>>>> 5 minute load average: 0.04
>>>>>> 15 minute load average: 0.13
>>>>>>
>>>>>> General Weewx info
>>>>>> Weewx version 5.1.0 detected.
>>>>>>
>>>>>> Currently installed extensions
>>>>>> No extensions installed.
>>>>>>
>>>>>> Archive info
>>>>>> Database name: weewx.sdb
>>>>>> Table name: archive
>>>>>> Version 4.0
>>>>>> Unit system: 1 (US)
>>>>>> First good timestamp: 2025-01-30 14:50:00 EST (1738266600)
>>>>>> Last good timestamp: 2025-02-02 15:00:00 EST (1738526400)
>>>>>> Number of records: 434
>>>>>> weewx (weewx.conf) is set to use an archive interval of 300 seconds.
>>>>>> The station hardware was not interrogated to determine the archive
>>>>>> interval.
>>>>>>
>>>>>> Supported SQL keys
>>>>>> dateTime usUnits interval
>>>>>>
>>>>>> altimeter appTemp appTemp1
>>>>>>
>>>>>> barometer batteryStatus1 batteryStatus2
>>>>>>
>>>>>> batteryStatus3 batteryStatus4 batteryStatus5
>>>>>>
>>>>>> batteryStatus6 batteryStatus7 batteryStatus8
>>>>>>
>>>>>> cloudbase co co2
>>>>>>
>>>>>> consBatteryVoltage dewpoint dewpoint1
>>>>>>
>>>>>> ET extraHumid1 extraHumid2
>>>>>>
>>>>>> extraHumid3 extraHumid4 extraHumid5
>>>>>>
>>>>>> extraHumid6 extraHumid7 extraHumid8
>>>>>>
>>>>>> extraTemp1 extraTemp2 extraTemp3
>>>>>>
>>>>>> extraTemp4 extraTemp5 extraTemp6
>>>>>>
>>>>>> extraTemp7 extraTemp8 forecast
>>>>>>
>>>>>> hail hailBatteryStatus hailRate
>>>>>>
>>>>>> heatindex heatindex1 heatingTemp
>>>>>>
>>>>>> heatingVoltage humidex humidex1
>>>>>>
>>>>>> inDewpoint inHumidity inTemp
>>>>>>
>>>>>> inTempBatteryStatus leafTemp1 leafTemp2
>>>>>>
>>>>>> leafWet1 leafWet2
>>>>>> lightning_distance
>>>>>> lightning_disturber_count lightning_energy
>>>>>> lightning_noise_count
>>>>>> lightning_strike_count luminosity maxSolarRad
>>>>>>
>>>>>> nh3 no2 noise
>>>>>>
>>>>>> o3 outHumidity outTemp
>>>>>>
>>>>>> outTempBatteryStatus pb pm10_0
>>>>>>
>>>>>> pm1_0 pm2_5 pressure
>>>>>>
>>>>>> radiation rain
>>>>>> rainBatteryStatus
>>>>>> rainRate referenceVoltage rxCheckPercent
>>>>>>
>>>>>> signal1 signal2 signal3
>>>>>>
>>>>>> signal4 signal5 signal6
>>>>>>
>>>>>> signal7 signal8 snow
>>>>>>
>>>>>> snowBatteryStatus snowDepth snowMoisture
>>>>>>
>>>>>> snowRate so2 soilMoist1
>>>>>>
>>>>>> soilMoist2 soilMoist3 soilMoist4
>>>>>>
>>>>>> soilTemp1 soilTemp2 soilTemp3
>>>>>>
>>>>>> soilTemp4 supplyVoltage txBatteryStatus
>>>>>>
>>>>>> UV uvBatteryStatus
>>>>>> windBatteryStatus
>>>>>> windchill windDir windGust
>>>>>>
>>>>>> windGustDir windrun windSpeed
>>>>>>
>>>>>>
>>>>>> Databases configured in weewx.conf:
>>>>>> archive_sqlite:
>>>>>> database_name weewx.sdb
>>>>>> driver weedb.sqlite
>>>>>> SQLITE_ROOT /var/lib/weewx
>>>>>> archive_mysql:
>>>>>> database_name weewx
>>>>>> driver weedb.mysql
>>>>>> host localhost
>>>>>> user weewx
>>>>>> password weewx
>>>>>>
>>>>>> --- Start configuration file /etc/weewx/weewx.conf ---
>>>>>> # WEEWX CONFIGURATION FILE
>>>>>> #
>>>>>> # Copyright (c) 2009-2024 Tom Keffer
>>>>>> # See the file LICENSE.txt for your rights.
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section is for general configuration information.
>>>>>>
>>>>>> # Set to 1 for extra debug info, otherwise comment it out or set to
>>>>>> zero.
>>>>>> debug = 1
>>>>>>
>>>>>> # Whether to log successful operations. May get overridden below.
>>>>>> log_success = True
>>>>>>
>>>>>> # Whether to log unsuccessful operations. May get overridden below.
>>>>>> log_failure = True
>>>>>>
>>>>>> # This configuration file was created by ...
>>>>>> version = 5.1.0
>>>>>> config_path = /etc/weewx/weewx.conf
>>>>>> WEEWX_ROOT = /etc/weewx
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section is for information about the station.
>>>>>>
>>>>>> [Station]
>>>>>>
>>>>>> # Description of the station location, such as your town.
>>>>>> location = "Savannah, GA"
>>>>>>
>>>>>> # Latitude in decimal degrees. Negative for southern hemisphere.
>>>>>> latitude = 31.919095
>>>>>> # Longitude in decimal degrees. Negative for western hemisphere.
>>>>>> longitude = -81.075874
>>>>>>
>>>>>> # Altitude of the station, with the unit it is in. This is used
>>>>>> only
>>>>>> # if the hardware cannot supply a value.
>>>>>> altitude = 14, foot # Choose 'foot' or 'meter' for unit
>>>>>>
>>>>>> # Set to type of station hardware. There must be a corresponding
>>>>>> stanza
>>>>>> # in this file, which includes a value for the 'driver' option.
>>>>>> station_type = Vantage
>>>>>>
>>>>>> # If you have a website, you may specify an URL
>>>>>> station_url = XXXXXX
>>>>>>
>>>>>> # The start of the rain year (1=January; 10=October, etc.). This
>>>>>> is
>>>>>> # downloaded from the station if the hardware supports it.
>>>>>> rain_year_start = 1
>>>>>>
>>>>>> # Start of week (0=Monday, 6=Sunday)
>>>>>> week_start = 0
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> [Vantage]
>>>>>> # This section is for the Davis Vantage series of weather
>>>>>> stations.
>>>>>>
>>>>>> # Connection type: serial or ethernet
>>>>>> # serial (the classic VantagePro)
>>>>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>>>>>> type = serial
>>>>>>
>>>>>> # If the connection type is serial, a port must be specified:
>>>>>> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
>>>>>> # /dev/ttyUSB0 is a common USB port name
>>>>>> # /dev/ttyS0 is a common serial port name
>>>>>> # BSD:
>>>>>> # /dev/cuaU0 is a common serial port name
>>>>>> port = /dev/ttyUSB0
>>>>>>
>>>>>> # If the connection type is ethernet, an IP Address/hostname is
>>>>>> required:
>>>>>> host = 1.2.3.4
>>>>>>
>>>>>> ######################################################
>>>>>> # The rest of this section rarely needs any attention.
>>>>>> # You can safely leave it "as is."
>>>>>> ######################################################
>>>>>>
>>>>>> # Serial baud rate (usually 19200)
>>>>>> baudrate = 19200
>>>>>>
>>>>>> # TCP port (when using the WeatherLinkIP)
>>>>>> tcp_port = 22222
>>>>>>
>>>>>> # TCP send delay (when using the WeatherLinkIP):
>>>>>> tcp_send_delay = 0.5
>>>>>>
>>>>>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 =
>>>>>> both
>>>>>> loop_request = 1
>>>>>>
>>>>>> # The id of your ISS station (usually 1). If you use a wind meter
>>>>>> connected
>>>>>> # to a anemometer transmitter kit, use its id
>>>>>> iss_id = 1
>>>>>>
>>>>>> # How long to wait for a response from the station before giving
>>>>>> up (in
>>>>>> # seconds; must be greater than 2)
>>>>>> timeout = 4
>>>>>>
>>>>>> # How long to wait before trying again (in seconds)
>>>>>> wait_before_retry = 1.2
>>>>>>
>>>>>> # How many times to try before giving up:
>>>>>> max_tries = 4
>>>>>>
>>>>>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
>>>>>> model_type = 2
>>>>>>
>>>>>> # The driver to use:
>>>>>> driver = weewx.drivers.vantage
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> [Simulator]
>>>>>> # This section is for the weewx weather station simulator.
>>>>>>
>>>>>> # The time (in seconds) between LOOP packets.
>>>>>> loop_interval = 2.5
>>>>>>
>>>>>> # The simulator mode can be either 'simulator' or 'generator'.
>>>>>> # Real-time simulator. Sleep between each LOOP packet.
>>>>>> mode = simulator
>>>>>> # Generator. Emit LOOP packets as fast as possible (useful for
>>>>>> testing).
>>>>>> #mode = generator
>>>>>>
>>>>>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified,
>>>>>> the
>>>>>> # default is to use the present time.
>>>>>> #start = 2011-01-01T00:00
>>>>>>
>>>>>> # The driver to use.
>>>>>> driver = weewx.drivers.simulator
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section is for uploading data to Internet sites
>>>>>>
>>>>>> [StdRESTful]
>>>>>>
>>>>>> # Uncomment and change to override logging for uploading services.
>>>>>> # log_success = True
>>>>>> # log_failure = True
>>>>>>
>>>>>> [[StationRegistry]]
>>>>>> # To register this weather station at weewx.com, set this to
>>>>>> true, and
>>>>>> # set option 'station_url', located in the [Station] section
>>>>>> above.
>>>>>> register_this_station = True
>>>>>>
>>>>>> [[AWEKAS]]
>>>>>> # This section is for configuring posts to AWEKAS.
>>>>>>
>>>>>> # If you wish to post to AWEKAS, set the option 'enable' to
>>>>>> true, then
>>>>>> # specify a username and password.
>>>>>> # Use quotes around the password to guard against parsing
>>>>>> errors.
>>>>>> enable = false
>>>>>> username = XXXXXX
>>>>>> password = XXXXXX
>>>>>>
>>>>>> [[CWOP]]
>>>>>> # This section is for configuring posts to CWOP.
>>>>>>
>>>>>> # If you wish to post to CWOP, set the option 'enable' to
>>>>>> true,
>>>>>> # then specify the station ID (e.g., CW1234).
>>>>>> enable = false
>>>>>> station = XXXXXX
>>>>>> # If this is an APRS (radio amateur) station, specify the
>>>>>> # passcode (e.g., 12345). Otherwise, ignore.
>>>>>> passcode = XXXXXX
>>>>>>
>>>>>> [[PWSweather]]
>>>>>> # This section is for configuring posts to PWSweather.com.
>>>>>>
>>>>>> # If you wish to post to PWSweather.com, set the option
>>>>>> 'enable' to
>>>>>> # true, then specify a station and password.
>>>>>> # Use quotes around the password to guard against parsing
>>>>>> errors.
>>>>>> enable = false
>>>>>> station = XXXXXX
>>>>>> password = XXXXXX
>>>>>>
>>>>>> [[WOW]]
>>>>>> # This section is for configuring posts to WOW.
>>>>>>
>>>>>> # If you wish to post to WOW, set the option 'enable' to
>>>>>> true, then
>>>>>> # specify a station and password.
>>>>>> # Use quotes around the password to guard against parsing
>>>>>> errors.
>>>>>> enable = false
>>>>>> station = XXXXXX
>>>>>> password = XXXXXX
>>>>>>
>>>>>> [[Wunderground]]
>>>>>> # This section is for configuring posts to the Weather
>>>>>> Underground.
>>>>>>
>>>>>> # If you wish to post to the Weather Underground, set the
>>>>>> option
>>>>>> # 'enable' to true, then specify a station (e.g.,
>>>>>> 'KORHOODR3'). Use
>>>>>> # the station key (find it at
>>>>>> # https://www.wunderground.com/member/devices) for the
>>>>>> password.
>>>>>> enable = false
>>>>>> station = XXXXXX
>>>>>> password = XXXXXX
>>>>>>
>>>>>> # Set the following to True to have weewx use the WU
>>>>>> "Rapidfire"
>>>>>> # protocol. Not all hardware can support it. See the User's
>>>>>> Guide.
>>>>>> rapidfire = False
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section specifies what reports, using which skins, to
>>>>>> generate.
>>>>>>
>>>>>> [StdReport]
>>>>>>
>>>>>> # Where the skins reside, relative to WEEWX_ROOT
>>>>>> SKIN_ROOT = skins
>>>>>>
>>>>>> # Where the generated reports should go, relative to WEEWX_ROOT
>>>>>> HTML_ROOT = /var/www/html/weewx
>>>>>>
>>>>>> # Uncomment and change to override logging for reports.
>>>>>> # log_success = True
>>>>>> # log_failure = True
>>>>>>
>>>>>> # The database binding indicates which data should be used in
>>>>>> reports.
>>>>>> data_binding = wx_binding
>>>>>>
>>>>>> # Each of the following subsections defines a report that will be
>>>>>> run.
>>>>>> # See the customizing guide to change the units, plot types and
>>>>>> line
>>>>>> # colors, modify the fonts, display additional sensor data, and
>>>>>> other
>>>>>> # customizations. Many of those changes can be made here by
>>>>>> overriding
>>>>>> # parameters, or by modifying templates within the skin itself.
>>>>>>
>>>>>> [[SeasonsReport]]
>>>>>> # The SeasonsReport uses the 'Seasons' skin, which contains
>>>>>> the
>>>>>> # images, templates and plots for the report.
>>>>>> skin = Seasons
>>>>>> enable = true
>>>>>>
>>>>>> [[SmartphoneReport]]
>>>>>> # The SmartphoneReport uses the 'Smartphone' skin, and the
>>>>>> images and
>>>>>> # files are placed in a dedicated subdirectory.
>>>>>> skin = Smartphone
>>>>>> enable = false
>>>>>> HTML_ROOT = /var/www/html/weewx/smartphone
>>>>>>
>>>>>> [[MobileReport]]
>>>>>> # The MobileReport uses the 'Mobile' skin, and the images and
>>>>>> files
>>>>>> # are placed in a dedicated subdirectory.
>>>>>> skin = Mobile
>>>>>> enable = false
>>>>>> HTML_ROOT = /var/www/html/weewx/mobile
>>>>>>
>>>>>> [[StandardReport]]
>>>>>> # This is the old "Standard" skin. By default, it is not
>>>>>> enabled.
>>>>>> skin = Standard
>>>>>> enable = false
>>>>>>
>>>>>> [[FTP]]
>>>>>> # FTP'ing the results to a webserver is treated as just
>>>>>> another report,
>>>>>> # albeit one with an unusual report generator!
>>>>>> skin = Ftp
>>>>>>
>>>>>> # If you wish to use FTP, set "enable" to "true", then fill
>>>>>> out the
>>>>>> # next four lines.
>>>>>> # Use quotes around the password to guard against parsing
>>>>>> errors.
>>>>>> enable = false
>>>>>> user = XXXXXX
>>>>>> password = XXXXXX
>>>>>> server = XXXXXX # The ftp server name, e.g,
>>>>>> www.myserver.org
>>>>>> path = replace_me # The destination directory, e.g.,
>>>>>> /weather
>>>>>>
>>>>>> # Set to True for an FTP over TLS (FTPS) connection. Not all
>>>>>> servers
>>>>>> # support this.
>>>>>> secure_ftp = False
>>>>>>
>>>>>> # To upload files from something other than what HTML_ROOT is
>>>>>> set
>>>>>> # to above, specify a different HTML_ROOT here.
>>>>>> #HTML_ROOT = /var/www/html/weewx
>>>>>>
>>>>>> # Most FTP servers use port 21.
>>>>>> port = 21
>>>>>>
>>>>>> # Set to 1 to use passive mode, zero for active mode
>>>>>> passive = 1
>>>>>>
>>>>>> [[RSYNC]]
>>>>>> # rsync'ing to a webserver is treated as just another report.
>>>>>> skin = Rsync
>>>>>>
>>>>>> # If you wish to use rsync, you must configure passwordless
>>>>>> ssh using
>>>>>> # public/private key authentication from the user account
>>>>>> that weewx
>>>>>> # runs to the user account on the remote machine where the
>>>>>> files
>>>>>> # will be copied.
>>>>>> #
>>>>>> # If you wish to use rsync, set "enable" to "true", then
>>>>>> # fill out server, user, and path.
>>>>>> # The server should appear in your .ssh/config file.
>>>>>> # The user is the username used in the identity file.
>>>>>> # The path is the destination directory, such as
>>>>>> /var/www/html/weather.
>>>>>> # Be sure that the user has write permissions on the
>>>>>> destination!
>>>>>> enable = false
>>>>>> server = XXXXXX
>>>>>> user = XXXXXX
>>>>>> path = replace_me
>>>>>>
>>>>>> # To upload files from something other than what HTML_ROOT is
>>>>>> set
>>>>>> # to above, specify a different HTML_ROOT here.
>>>>>> #HTML_ROOT = /var/www/html/weewx
>>>>>>
>>>>>> # Rsync can be configured to remove files from the remote
>>>>>> server if
>>>>>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION:
>>>>>> if you
>>>>>> # make a mistake in the remote path, you could could
>>>>>> unintentionally
>>>>>> # cause unrelated files to be deleted. Set to 1 to enable
>>>>>> remote file
>>>>>> # deletion, zero to allow files to accumulate remotely.
>>>>>> delete = 0
>>>>>>
>>>>>> # Options in the [[Defaults]] section below will apply to all
>>>>>> reports.
>>>>>> # What follows are a few of the more popular options you may want
>>>>>> to
>>>>>> # uncomment, then change.
>>>>>> [[Defaults]]
>>>>>>
>>>>>> # Which language to use for all reports. Not all skins
>>>>>> support all
>>>>>> # languages. You can override this for individual reports.
>>>>>> lang = en
>>>>>>
>>>>>> # Which unit system to use for all reports. Choices are 'us',
>>>>>> 'metric',
>>>>>> # or 'metricwx'. You can override this for individual
>>>>>> reports.
>>>>>> unit_system = us
>>>>>>
>>>>>> [[[Units]]]
>>>>>>
>>>>>> # Option "unit_system" above sets the general unit
>>>>>> system, but
>>>>>> # overriding specific unit groups is possible. These are
>>>>>> popular
>>>>>> # choices. Uncomment and set as appropriate. The unit is
>>>>>> always
>>>>>> # in the singular, e.g., 'mile_per_hour', NOT
>>>>>> 'miles_per_hour'
>>>>>> [[[[Groups]]]]
>>>>>> # group_altitude = meter # Options
>>>>>> are 'foot' or 'meter'
>>>>>> # group_pressure = mbar # Options
>>>>>> are 'inHg', 'mmHg', 'mbar', or 'hPa'
>>>>>> # group_rain = mm # Options
>>>>>> are 'inch', 'cm', or 'mm'
>>>>>> # group_rainrate = mm_per_hour # Options
>>>>>> are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
>>>>>> # group_temperature = degree_C # Options
>>>>>> are 'degree_C', 'degree_F', or 'degree_K'
>>>>>> # The following line is used to keep the above lines
>>>>>> indented
>>>>>> # properly. It can be ignored.
>>>>>> unused = unused
>>>>>>
>>>>>> # Uncommenting the following section frequently results
>>>>>> in more
>>>>>> # attractive formatting of times and dates, but may not
>>>>>> work in
>>>>>> # your locale.
>>>>>> [[[[TimeFormats]]]]
>>>>>> # day = %H:%M
>>>>>> # week = %H:%M on %A
>>>>>> # month = %d-%b-%Y %H:%M
>>>>>> # year = %d-%b-%Y %H:%M
>>>>>> # rainyear = %d-%b-%Y %H:%M
>>>>>> # current = %d-%b-%Y %H:%M
>>>>>> # ephem_day = %H:%M
>>>>>> # ephem_year = %d-%b-%Y %H:%M
>>>>>> # The following line is used to keep the above lines
>>>>>> indented
>>>>>> # properly. It can be ignored.
>>>>>> unused = unused
>>>>>>
>>>>>> [[[Labels]]]
>>>>>> # Users frequently change the labels for these
>>>>>> observation types.
>>>>>> [[[[Generic]]]]
>>>>>> # inHumidity = Inside Humidity
>>>>>> # inTemp = Inside Temperature
>>>>>> # outHumidity = Outside Humidity
>>>>>> # outTemp = Outside Temperature
>>>>>> # extraTemp1 = Temperature1
>>>>>> # extraTemp2 = Temperature2
>>>>>> # extraTemp3 = Temperature3
>>>>>> # The following line is used to keep the above lines
>>>>>> indented
>>>>>> # properly. It can be ignored.
>>>>>> unused = unused
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This service converts the unit system coming from the hardware to
>>>>>> a unit
>>>>>> # system in the database.
>>>>>>
>>>>>> [StdConvert]
>>>>>>
>>>>>> # The target_unit affects only the unit system in the database.
>>>>>> Once
>>>>>> # chosen it cannot be changed without converting the entire
>>>>>> database.
>>>>>> # Modification of target_unit after starting weewx will result in
>>>>>> # corrupt data - the database will contain a mix of US and METRIC
>>>>>> data.
>>>>>> #
>>>>>> # The value of target_unit does not affect the unit system for
>>>>>> # reporting - reports can display US, Metric, or any combination
>>>>>> of units.
>>>>>> #
>>>>>> # In most cases, target_unit should be left as the default: US
>>>>>> #
>>>>>> # In particular, those migrating from a standard wview
>>>>>> installation
>>>>>> # should use US since that is what the wview database contains.
>>>>>>
>>>>>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
>>>>>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section can adjust data using calibration expressions.
>>>>>>
>>>>>> [StdCalibrate]
>>>>>>
>>>>>> [[Corrections]]
>>>>>> # For each type, an arbitrary calibration expression can be
>>>>>> given.
>>>>>> # It should be in the units defined in the StdConvert section.
>>>>>> # Example:
>>>>>> foo = foo + 0.2
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section is for quality control checks. If units are not
>>>>>> specified,
>>>>>> # values must be in the units defined in the StdConvert section.
>>>>>>
>>>>>> [StdQC]
>>>>>>
>>>>>> [[MinMax]]
>>>>>> barometer = 26, 32.5, inHg
>>>>>> pressure = 24, 34.5, inHg
>>>>>> outTemp = -40, 120, degree_F
>>>>>> inTemp = 10, 120, degree_F
>>>>>> outHumidity = 0, 100
>>>>>> inHumidity = 0, 100
>>>>>> windSpeed = 0, 120, mile_per_hour
>>>>>> rain = 0, 10, inch
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section controls the origin of derived values.
>>>>>>
>>>>>> [StdWXCalculate]
>>>>>>
>>>>>> [[Calculations]]
>>>>>> # How to calculate derived quantities. Possible values are:
>>>>>> # hardware - use the value provided by hardware
>>>>>> # software - use the value calculated by weewx
>>>>>> # prefer_hardware - use value provide by hardware if
>>>>>> available,
>>>>>> # otherwise use value calculated by weewx
>>>>>>
>>>>>> pressure = prefer_hardware
>>>>>> altimeter = prefer_hardware
>>>>>> appTemp = prefer_hardware
>>>>>> barometer = prefer_hardware
>>>>>> cloudbase = prefer_hardware
>>>>>> dewpoint = prefer_hardware
>>>>>> ET = prefer_hardware
>>>>>> heatindex = prefer_hardware
>>>>>> humidex = prefer_hardware
>>>>>> inDewpoint = prefer_hardware
>>>>>> maxSolarRad = prefer_hardware
>>>>>> rainRate = prefer_hardware
>>>>>> windchill = prefer_hardware
>>>>>> windrun = prefer_hardware
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # For hardware that supports it, this section controls how often the
>>>>>> # onboard clock gets updated.
>>>>>>
>>>>>> [StdTimeSynch]
>>>>>>
>>>>>> # How often to check the weather station clock for drift (in
>>>>>> seconds)
>>>>>> clock_check = 14400
>>>>>>
>>>>>> # How much it can drift before we will correct it (in seconds)
>>>>>> max_drift = 5
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section is for configuring the archive service.
>>>>>>
>>>>>> [StdArchive]
>>>>>>
>>>>>> # If the station hardware supports data logging then the archive
>>>>>> interval
>>>>>> # will be downloaded from the station. Otherwise, specify it (in
>>>>>> seconds).
>>>>>> archive_interval = 300
>>>>>>
>>>>>> # If possible, new archive records are downloaded from the station
>>>>>> # hardware. If the hardware does not support this, then new
>>>>>> archive
>>>>>> # records will be generated in software.
>>>>>> # Set the following to "software" to force software record
>>>>>> generation.
>>>>>> record_generation = hardware
>>>>>>
>>>>>> # Whether to include LOOP data in hi/low statistics.
>>>>>> loop_hilo = True
>>>>>>
>>>>>> # Uncomment and change to override logging for archive operations.
>>>>>> # log_success = True
>>>>>> # log_failure = True
>>>>>>
>>>>>> # The data binding used to save archive records.
>>>>>> data_binding = wx_binding
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section binds a data store to a database.
>>>>>>
>>>>>> [DataBindings]
>>>>>>
>>>>>> [[wx_binding]]
>>>>>> # The database must match one of the sections in [Databases].
>>>>>> # This is likely to be the only option you would want to
>>>>>> change.
>>>>>> database = archive_sqlite
>>>>>> # The name of the table within the database.
>>>>>> table_name = archive
>>>>>> # The manager handles aggregation of data for historical
>>>>>> summaries.
>>>>>> manager = weewx.manager.DaySummaryManager
>>>>>> # The schema defines the structure of the database.
>>>>>> # It is *only* used when the database is created.
>>>>>> schema = schemas.wview_extended.schema
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section defines various databases.
>>>>>>
>>>>>> [Databases]
>>>>>>
>>>>>> # A SQLite database is simply a single file.
>>>>>> [[archive_sqlite]]
>>>>>> database_name = weewx.sdb
>>>>>> database_type = SQLite
>>>>>>
>>>>>> # MySQL
>>>>>> [[archive_mysql]]
>>>>>> database_name = weewx
>>>>>> database_type = MySQL
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section defines defaults for the different types of
>>>>>> databases.
>>>>>>
>>>>>> [DatabaseTypes]
>>>>>>
>>>>>> # Defaults for SQLite databases.
>>>>>> [[SQLite]]
>>>>>> driver = weedb.sqlite
>>>>>> # Directory in which database files are located, relative to
>>>>>> WEEWX_ROOT
>>>>>> SQLITE_ROOT = /var/lib/weewx
>>>>>>
>>>>>> # Defaults for MySQL databases.
>>>>>> [[MySQL]]
>>>>>> driver = weedb.mysql
>>>>>> # The host where the database is located.
>>>>>> host = localhost
>>>>>> # The user name for logging in to the host.
>>>>>> user = XXXXXX
>>>>>> # Use quotes around the password to guard against parsing
>>>>>> errors.
>>>>>> password = XXXXXX
>>>>>>
>>>>>>
>>>>>> ##############################################################################
>>>>>>
>>>>>> # This section configures the internal weewx engine.
>>>>>>
>>>>>> [Engine]
>>>>>>
>>>>>> # This section specifies which services should be run and in what
>>>>>> order.
>>>>>> [[Services]]
>>>>>> prep_services = weewx.engine.StdTimeSynch
>>>>>> data_services = ,
>>>>>> process_services = weewx.engine.StdConvert,
>>>>>> weewx.engine.StdCalibrate, weewx.engine.StdQC,
>>>>>> weewx.wxservices.StdWXCalculate
>>>>>> xtype_services = weewx.wxxtypes.StdWXXTypes,
>>>>>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
>>>>>> weewx.wxxtypes.StdDelta
>>>>>> archive_services = weewx.engine.StdArchive
>>>>>> restful_services = weewx.restx.StdStationRegistry,
>>>>>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
>>>>>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
>>>>>> report_services = weewx.engine.StdPrint,
>>>>>> weewx.engine.StdReport
>>>>>> scott@spi-1:~ $
>>>>>>
>>>>>>
>>>>>> On Sunday, February 2, 2025 at 3:01:39 PM UTC-5 scott pierce wrote:
>>>>>>
>>>>>>> Yes, big rookie mistake. Working through it now. Thanks for
>>>>>>> pointing out!!
>>>>>>> Scott
>>>>>>>
>>>>>>>
>>>>>>> On Sunday, February 2, 2025 at 2:37:45 PM UTC-5 [email protected]
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Maybe you missed that you refer to a 4.9 version of the docs, but
>>>>>>>> you've installed a 5.1 version?
>>>>>>>>
>>>>>>>> https://weewx.com/docs/5.1/usersguide/where/?h=find#where-to-find-things
>>>>>>>>
>>>>>>>> scott pierce schrieb am Sonntag, 2. Februar 2025 um 20:33:42 UTC+1:
>>>>>>>>
>>>>>>>>> *Also....where are the executables? In the documentation it says:*
>>>>>>>>>
>>>>>>>>> This is a reference guide to the executable utilities that come
>>>>>>>>> with WeeWX:
>>>>>>>>>
>>>>>>>>> - wee_config
>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_config_utility> for
>>>>>>>>> changing the configuration file, and configuring new device
>>>>>>>>> drivers;
>>>>>>>>> - wee_database
>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_database_utility>
>>>>>>>>> for
>>>>>>>>> reconfiguring the database;
>>>>>>>>> - wee_debug
>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_debug_utility> for
>>>>>>>>> producing debug reports for remote support;
>>>>>>>>> - wee_device
>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_device_utility> for
>>>>>>>>> configuring your hardware;
>>>>>>>>> - wee_extension
>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_extension_utility>
>>>>>>>>> for
>>>>>>>>> installing and removing extensions;
>>>>>>>>> - wee_import
>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_import_utility> for
>>>>>>>>> importing historical data from external sources;
>>>>>>>>> - wee_reports
>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_reports_utility> for
>>>>>>>>> running reports without running WeeWX itself;
>>>>>>>>> - weewxd <https://weewx.com/docs/4.9/utilities.htm#weewxd> the
>>>>>>>>> main weewx program;
>>>>>>>>> - wunderfixer
>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wunderfixer_utility> for
>>>>>>>>> resending data missing on the Weather Underground site.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *And then to find them....*
>>>>>>>>>
>>>>>>>>> Location of WeeWX components¶
>>>>>>>>> <https://weewx.com/docs/5.0/usersguide/where/#location-of-weewx-components>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Executables*BIN_ROOT*/usr/share/weewx/
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *But when I look in that directory....*
>>>>>>>>>
>>>>>>>>> @spi-1:/usr/share/weewx $ ls
>>>>>>>>> __pycache__ weecfg weectl.py weeimport weeutil weewx_data
>>>>>>>>> schemas weectllib weedb weeplot weewx weewxd.py
>>>>>>>>> @spi-1:/usr/share/weewx $
>>>>>>>>>
>>>>>>>>> *None of them show up. What am I missing?*
>>>>>>>>>
>>>>>>>>> *Thanks*
>>>>>>>>> *Scott*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Sunday, February 2, 2025 at 12:03:03 PM UTC-5 scott pierce
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>> I was able to update the confi file and change the Debug to
>>>>>>>>>> 1...which in itself is a huge win as it took me a while to figure
>>>>>>>>>> out how
>>>>>>>>>> to even access the file. (permissions have been a bear to learn). I
>>>>>>>>>> have
>>>>>>>>>> read a lot in the last 24 hours!
>>>>>>>>>> That said, I still don't know how to access any additional log
>>>>>>>>>> information. When I run the status check, it comes back with
>>>>>>>>>> basically the
>>>>>>>>>> same info...
>>>>>>>>>> × weewx.service - WeeWX
>>>>>>>>>> Loaded: loaded (/lib/systemd/system/weewx.service; enabled;
>>>>>>>>>> preset: enabled)
>>>>>>>>>> Active: failed (Result: exit-code) since Sun 2025-02-02
>>>>>>>>>> 11:35:11 EST; 23min ago
>>>>>>>>>> Duration: 18min 49.054s
>>>>>>>>>> Docs: https://weewx.com/docs
>>>>>>>>>> Process: 1261 ExecStart=weewxd /etc/weewx/weewx.conf
>>>>>>>>>> (code=exited, status=4)
>>>>>>>>>> Main PID: 1261 (code=exited, status=4)
>>>>>>>>>> CPU: 873ms
>>>>>>>>>>
>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1444,
>>>>>>>>>> in
>>>>>>>>>> _setup
>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>> **** self.hardware_type = self._determine_hardware()
>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>> **** ^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1435,
>>>>>>>>>> in
>>>>>>>>>> _determine_hardware
>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>> **** raise weewx.WeeWxIOError("Unable to read hardware type")
>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>> **** weewx.WeeWxIOError: Unable to read hardware type
>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: Unable to
>>>>>>>>>> load driver: Unable to read hardware type
>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: ****
>>>>>>>>>> Exiting...
>>>>>>>>>> Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Main process
>>>>>>>>>> exited, code=exited, status=4/NOPERMISSION
>>>>>>>>>> Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Failed with
>>>>>>>>>> result 'exit-code'.
>>>>>>>>>> ~
>>>>>>>>>>
>>>>>>>>>> Thanks
>>>>>>>>>> Scott
>>>>>>>>>> On Saturday, February 1, 2025 at 10:51:51 PM UTC-5 John Kline
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> If you set debug = 1 and restart weewx, we’ll get to see the
>>>>>>>>>>> hardware_type read from the envoy.
>>>>>>>>>>> The line in the log will contain “Hardware type is “
>>>>>>>>>>>
>>>>>>>>>>> On Feb 1, 2025, at 6:34 PM, scott pierce <[email protected]>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Successfully installed WeeWX on Rpi 5 and it's ingesting data
>>>>>>>>>>> from Davis Envoy USB Weather Link data logger.
>>>>>>>>>>>
>>>>>>>>>>> Also, I have been able to view reports...so that's nice.
>>>>>>>>>>> I'm just beginning this journey so still a lot to learn and set
>>>>>>>>>>> up.
>>>>>>>>>>> One quick question I can't find an answer to in the group or in
>>>>>>>>>>> notes...
>>>>>>>>>>> when I run a status check this is the result...
>>>>>>>>>>> × weewx.service - WeeWX
>>>>>>>>>>> Loaded: loaded (/lib/systemd/system/weewx.service; enabled;
>>>>>>>>>>> preset: enabled)
>>>>>>>>>>> Active: failed (Result: exit-code) since Sat 2025-02-01
>>>>>>>>>>> 21:18:12 EST; 7min ago
>>>>>>>>>>> Duration: 35min 33.415s
>>>>>>>>>>> Docs: https://weewx.com/docs
>>>>>>>>>>> Process: 6313 ExecStart=weewxd /etc/weewx/weewx.conf
>>>>>>>>>>> (code=exited, status=4)
>>>>>>>>>>> Main PID: 6313 (code=exited, status=4)
>>>>>>>>>>> CPU: 2.339s
>>>>>>>>>>>
>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>> **** log.debug("Hardware name: %s", self.hardware_name)
>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>> **** ^^^^^^^^^^^^^^^^^^
>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line
>>>>>>>>>>> 1416, in
>>>>>>>>>>> hardware_name
>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>> **** raise weewx.UnsupportedFeature("Unknown hardware type %d"
>>>>>>>>>>> %
>>>>>>>>>>> self.hardware_type)
>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>> **** weewx.UnsupportedFeature: Unknown hardware type 10
>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: Unable to
>>>>>>>>>>> load driver: Unknown hardware type 10
>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: ****
>>>>>>>>>>> Exiting...
>>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Main process
>>>>>>>>>>> exited, code=exited, status=4/NOPERMISSION
>>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Failed with
>>>>>>>>>>> result 'exit-code'.
>>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Consumed 2.339s
>>>>>>>>>>> CPU time.
>>>>>>>>>>>
>>>>>>>>>>> I'm guessing I put the hardware name in wrong in setup...not
>>>>>>>>>>> sure. Also don't know where to look to check.
>>>>>>>>>>> Any suggestions are appreciated.
>>>>>>>>>>> Thanks
>>>>>>>>>>> Scott
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>> To view this discussion visit
>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com
>>>>>>>>>>>
>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>> .
>>>>>>>>>>>
>>>>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/82fca760-7e92-48b9-b013-57237b966facn%40googlegroups.com.
