I don't think the Interceptor driver in its pre-diluvial state will do
the job here - I suggest to get the up-to-date version of it from (see
below)
You will need to use the original interceptor driver installation whose
driver will not show you your rain data, as the dinosaur-version doesn't
recognize a WS90/DP1100 sensor array.
Get it up and running, even with a reduced number of sensors to make
sure it works in principle.
And then get two files from here:
https://www.pc-wetterstation.de/weewx/usr/share/weewx/user/interceptor.zip
and
https://www.pc-wetterstation.de/weewx/usr/share/weewx/user/extensions.zip
unpack them
and copy both files into the .../weewx/user directory (path depending on
your installation method)
replacing the existing interceptor.py and extensions.py files
then you will have a fully fledged Interceptor driver experience and can
use all existing Ecowitt sensors (the DP2000 7-in-1 ultra is an Ecowitt
HP2564 station with a WS90, just relabeled) you may later want to add.
You will of course have to edit your skin.conf for more sensor graphics
and data to be displayed.
An additional GW1100/1200/2000/3000 is not needed but can turn out to be
useful - and be it as an hardware backup.
The GW3000 has the charme that not only data can be saved regularly to
an SD card but the data is also network retrievable - and the still
to-be-published local Ecowitt API driver in version 7.0 should be able
to use these data to backfill data weewx may have missed due to
unwanted/unforeseen downtime
Good luck
On 20.02.2025 10:29, '[email protected]' via weewx-user wrote:
The interceptor driver with ecowitt protocol, see
https://github.com/matthewwall/weewx-interceptor/blob/master/bin/user/interceptor.py
Or you get an additional GW2000 or GW3000 and use the ecowitt gateway
driver https://github.com/gjr80/weewx-gw1000
Andre schrieb am Donnerstag, 20. Februar 2025 um 09:48:15 UTC+1:
I'm not sure but is weewx supporting a Frogit HP2000 7-In-1 Ultra
weather station? Which driver supports all sensors?
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/60c2f58d-4bdb-43d3-be3c-9fb39bb6ec8dn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/60c2f58d-4bdb-43d3-be3c-9fb39bb6ec8dn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/7b44ace0-560d-497d-bf0e-91583c8a51b0%40gmail.com.
