First of all, thank you Rainer for the feedback. If what you describe is the latest version of the HP2000 weather station, why is this version not in the official weewx Github? Don't get me wrong, I generally like it when solutions are offered by the community. Are you the developer?
Rainer Lang schrieb am Donnerstag, 20. Februar 2025 um 17:37:23 UTC+1: > I don't think the Interceptor driver in its pre-diluvial state will do the > job here - I suggest to get the up-to-date version of it from (see below) > > You will need to use the original interceptor driver installation whose > driver will not show you your rain data, as the dinosaur-version doesn't > recognize a WS90/DP1100 sensor array. > Get it up and running, even with a reduced number of sensors to make sure > it works in principle. > > And then get two files from here: > https://www.pc-wetterstation.de/weewx/usr/share/weewx/user/interceptor.zip > and > https://www.pc-wetterstation.de/weewx/usr/share/weewx/user/extensions.zip > unpack them > and copy both files into the .../weewx/user directory (path depending on > your installation method) > replacing the existing interceptor.py and extensions.py files > > then you will have a fully fledged Interceptor driver experience and can > use all existing Ecowitt sensors (the DP2000 7-in-1 ultra is an Ecowitt > HP2564 station with a WS90, just relabeled) you may later want to add. > You will of course have to edit your skin.conf for more sensor graphics > and data to be displayed. > > An additional GW1100/1200/2000/3000 is not needed but can turn out to be > useful - and be it as an hardware backup. > The GW3000 has the charme that not only data can be saved regularly to an > SD card but the data is also network retrievable - and the still > to-be-published local Ecowitt API driver in version 7.0 should be able to > use these data to backfill data weewx may have missed due to > unwanted/unforeseen downtime > > Good luck > > On 20.02.2025 10:29, '[email protected]' via weewx-user wrote: > > The interceptor driver with ecowitt protocol, see > https://github.com/matthewwall/weewx-interceptor/blob/master/bin/user/interceptor.py > > Or you get an additional GW2000 or GW3000 and use the ecowitt gateway > driver https://github.com/gjr80/weewx-gw1000 > > Andre schrieb am Donnerstag, 20. Februar 2025 um 09:48:15 UTC+1: > >> I'm not sure but is weewx supporting a Frogit HP2000 7-In-1 Ultra weather >> station? Which driver supports all sensors? > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/d/msgid/weewx-user/60c2f58d-4bdb-43d3-be3c-9fb39bb6ec8dn%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/60c2f58d-4bdb-43d3-be3c-9fb39bb6ec8dn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/9dd2391d-96b2-42df-9e30-c994c4f875ben%40googlegroups.com.
