Liz, The log points to a config read error. Looking at what you posted, seems you have a fourth bracket missing after rainRate.
Regards Darryn On Friday, June 6, 2025 at 3:59:35 PM UTC+10 L B wrote: > I have been using Weewx for some years, and decided to export data to MQTT > to put into HomeAssistant. It has been successful on Weewx version = 4.10.2 > from Debian with Matthew Wall's MQTT extension. > I have been following some instructions from a 2018 thread > https://groups.google.com/g/weewx-user/c/MkP6Tacef7k and have managed to > change units for rain on the MQTT extension but not for rainRate. > When I had rainRate set for mm_per_hour Weewx refused to start. > > log excerpt for one cycle which was successful and the next try with > mm_per_hour in the config is attached > > offending part of weewx.conf also attached. Commenting out the three lines > allows weewx to run > > The 2018 post describes success with using mm_per_hour for rain rate. The > designation seems to be a current unit in > https://weewx.com/docs/5.0/reference/units/ > Can anyone help me to get mm_per_hour not cm_per_hour outputted by mqtt? > > Liz > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/debde992-a5fd-4542-b82c-64e706d6c140n%40googlegroups.com.
