Thanks for that. Weewx has started, now to wait to see if the edit is successful.
On Saturday, June 7, 2025 at 9:08:43 AM UTC+10 Darryn Capes-Davis wrote: > Liz, > > The log points to a config read error. Looking at what you posted, seems > you have a fourth bracket missing after rainRate. > > Regards > > Darryn > > On Friday, June 6, 2025 at 3:59:35 PM UTC+10 L B wrote: > >> I have been using Weewx for some years, and decided to export data to >> MQTT to put into HomeAssistant. It has been successful on Weewx version = >> 4.10.2 from Debian with Matthew Wall's MQTT extension. >> I have been following some instructions from a 2018 thread >> https://groups.google.com/g/weewx-user/c/MkP6Tacef7k and have managed to >> change units for rain on the MQTT extension but not for rainRate. >> When I had rainRate set for mm_per_hour Weewx refused to start. >> >> log excerpt for one cycle which was successful and the next try with >> mm_per_hour in the config is attached >> >> offending part of weewx.conf also attached. Commenting out the three >> lines allows weewx to run >> >> The 2018 post describes success with using mm_per_hour for rain rate. The >> designation seems to be a current unit in >> https://weewx.com/docs/5.0/reference/units/ >> Can anyone help me to get mm_per_hour not cm_per_hour outputted by mqtt? >> >> Liz >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/dab70394-878f-4379-92c6-5f10a5578388n%40googlegroups.com.
