Hi Tom, You were right. I had forgotten to stop the weewx service before I ran the wee_device comands. So, I went back, stopped the weewx service, ran the wee_device commands and restarted the weewx service afterwhich everything appears to be working now as the charts and graphs appear to be populating. So, hopefully the problem is solved!
Thanks very much for you prompt assistance! Gordon Dickens On Wednesday, July 9, 2025 at 9:36:08 AM UTC-4 Tom Keffer wrote: > Unfortunately, that is not a proper log, so it's hard to say what's going > on. Perhaps you did not stop weewxd before running wee_device? > > How to produce a useful log > <https://github.com/weewx/weewx/wiki/view-logs>. > > > > > On Wed, Jul 9, 2025 at 6:18 AM Gordon Dickens <[email protected]> wrote: > >> Thanks Glen and Vince for referencing the 4.x documentation and the use >> of wee_device instead of wee_ctl. I attempted to run the wee_device >> commands, however, more errors were generated. The attached file includes >> the error dialog in response to "wee_device --dump" where the following >> lines are repeated several times followed by a Traceback dialog: >> >> Unable to wake up console... sleeping >> Unable to wake up console... retrying >> >> I think that the console's data logger usb interface has failed and may >> need replacing. Any comments? >> >> Thanks, >> >> Gordon >> >> >> >> >> On Tuesday, July 8, 2025 at 7:13:00 PM UTC-4 Glenn McKechnie wrote: >> >>> Weectl is for versions 5.x >>> >>> I suspect you need the older syntax... >>> >>> wee_device --dump >>> wee_device --clear-memory >>> >>> which can be found on an older version of the page Tom linked to. >>> >>> >>> https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station/7e6acff27411a560ec19a1bff8eea3a6f78b6a29 >>> >>> For all versions of the documentation... >>> >>> You mention both Weewx versions 4.11.z and 3.x.x. The documentation for >>> those versions is linked at >>> https://www.weewx.com/docs.html >>> >>> >>> Cheers >>> Glenn >>> >>> Various WeeWx addons at >>> https://github.com/glennmckechnie >>> >>> >>> On Wed, 9 Jul 2025 at 08:48, Gordon Dickens <[email protected]> wrote: >>> >>>> Hey Tom, >>>> >>>> In my previous post, I posted the errors from my log that occur after I >>>> restart weewx. Please let me know if you want more of the logs or if that >>>> suffices for your review. >>>> >>>> I powered down the console for between 1 and 2 minutes and then powered >>>> back up as per step 1 in the "logger memory is corrupted" article >>>> entitled >>>> "Troubleshooting the Davis Vantage station" . However, that did not help >>>> anything. So, I attempted to use the weectl to dump and clear the memory, >>>> however, my system does not have the weectl command probably since I >>>> started weewx six years ago on version 3.x.x. The apt command suggested >>>> that I get weectl by installing weewx, however, I don't want to upgrade >>>> weewx right now. So, how do I get the weectl command without upgrading >>>> weewx? Alternatively, is there another way to dump and clear the memory >>>> other than using the weectl command? >>>> >>>> Thanks! >>>> >>>> Gordon >>>> >>>> On Tuesday, July 8, 2025 at 6:07:54 PM UTC-4 Gordon Dickens wrote: >>>> >>>>> Here is some more info regarding this problem. The attached file >>>>> contains the pertenant sections of my logs that show lots of >>>>> weewx.chetahgenerator errors after restarting the weewx service. The >>>>> first >>>>> error encountered is: >>>>> >>>>> ERROR weewx.cheetahgenerator: Evaluation of template /etc/we >>>>> ewx/skins/Inigo/inigo-data.txt.tmpl failed with exception '<class >>>>> 'TypeError'>' >>>>> >>>>> On Tuesday, July 8, 2025 at 5:35:42 PM UTC-4 Gordon Dickens wrote: >>>>> >>>>>> Hello all, >>>>>> >>>>>> I'm running Weewx version 4.10.2 and Belchertown skin version 1.3.1 >>>>>> on Debian 12 with a Davis Vantage Pro2 weather station and console. >>>>>> >>>>>> Weewx and Belchertown had been running successfully for about six >>>>>> years and then yesterday, for some reason, my data console temporarily >>>>>> lost >>>>>> connectivity with my station. So, I waited until it successfully >>>>>> reestablished the connection and then the console's USB port apparently >>>>>> stopped communicating with my Debian server. So, I powered the console >>>>>> down, uninstalled the USB port, reinstalled the USB port and powered >>>>>> the >>>>>> console back up afterwhich everything appeared to be working properly. >>>>>> However, after an hour or so, I noticed that the weewx graphs and >>>>>> Belchertown charts were not being populated with new data. All of the >>>>>> alphanumeric data and reports appear to be correct but the graphs and >>>>>> charts are not being updated. >>>>>> >>>>>> Does anybody have any idea what may have happened to cause this and >>>>>> how to potentially fix it? >>>>>> >>>>>> Thanks very much in advance! >>>>>> >>>>>> Gordon >>>>>> >>>>> -- >>>> >>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion visit >>>> https://groups.google.com/d/msgid/weewx-user/ce7c51db-67aa-405c-ab7e-dc0e92a76ecbn%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/ce7c51db-67aa-405c-ab7e-dc0e92a76ecbn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion visit >> https://groups.google.com/d/msgid/weewx-user/9d6e6a6e-5e7b-4b2d-944a-464d88813b6cn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/9d6e6a6e-5e7b-4b2d-944a-464d88813b6cn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/c4aed578-34c7-4c1a-af89-0ec3f78f75f2n%40googlegroups.com.
