If I understand the seasons skin correctly, and alltimeSeason is a clone,
you need to add a configuration, as there is only dayrain, monthrain, etc.
built in.
So let's assume your tipping sensor is rain and you piezo sensor is p_rain,
the data of the tipping sensor should be there, out-of-the-box.
First option: If you want to add the p_rain to the same image as rain, it
should be enough if you put in your weewx.conf (don't modify skin.conf!),
below the alltimeSeasons config in [StdReport]:
[StdReport]
[[alltimeSeasonsReport]]
[[[ImageGenerator]]]
[[[[day_images]]]]
[[[[[dayrain]]]]]
[[[[[[p_rain]]]]]]
aggregate_type = sum
aggregate_interval = 1h
label = Piezo Rain (hourly total)
color = <optional, default red doesn't seem right
for rain... your choice, but it obviously should be different from the
color for rain>
Looks like this:
[image: one_images.png]
Second option: If you want to add an image for p_rain apart from rain, add
p_rain to the options and configure the image:
[StdReport]
[[alltimeSeasonsReport]]
[[[DisplayOptions]]]
plot_groups = barometer, tempdew, tempfeel, hum, wind, winddir,
windvec, rain, p_rain, ET, UV, radiation, lightning, tempin, humin,
tempext, humext, tempext2, humext2, templeaf, wetleaf, tempsoil, moistsoil,
pm
[[[ImageGenerator]]]
[[[[day_images]]]]
[[[[[dayp_rain]]]]]
[[[[[[p_rain]]]]]]
aggregate_type = sum
aggregate_interval = 1h
label = Piezo Rain (hourly total)
Looks like this:
[image: two_images.png]
Do alike for week, month, year and don't forget the translations ;)
Vetti52 schrieb am Samstag, 19. Juli 2025 um 10:17:05 UTC+2:
> Well, finally, it works - mostly.
>
> After I got the GW3001 I managed to get it into producing data.
> Interestingly it did connect to my Froggit DP1500 as well. I then did
> dactivate all unused sensors there. So, I think, that could use this
> GW1000 clone for both arrays.
>
> Then I introduced the GW3000 into weewx as a service - and did not see any
> data. I then changed both drivers, with GW1000 as service - with all data
> from GW3000 but none from GW1000. I switched back and replaced the GW3000
> service by @Ian ecowitt-http driver. The log showed the activation, I could
> even see catchup, but no data. Long story short result: I always missed to
> establish a field map for the service stanzas. Silly me! I should have
> known that in case of running as a service, a field map is mandatory,
> because this was one of my strategies for „silencing“ certain fields, such
> as the indoor temperature and wind of GW3000. Both are not representative.
> So I finally went back to the most conservative setup and user GW1000 as
> GW1000driver and GW3000 as GW1000Service. I maybe will replace
> GW3000service by Ecowitt-httpService, as I know, that it will work. But,
> currently, the only advantage would be the use of catchup.
> So, I ended up with weewx using data of both sources. I additionally found
> a lot of help using the examples in @Werner github driver and comparison of
> his custom driver and the new http driver.
>
> What still is open to be solved:
> I use alltimeSeansos skin, which is a clone of the most recent Seasons
> skin. I tried to add the new piezo rain plots, besides that of tipping
> sensor rain, which was „build in“. I did non succeed. I had a look into the
> www/html/weewx directory and found, that the png files were there. But they
> did not show in the web site. My quick and dirty solution was to rename the
> stanza contining both sensors in the skin.config into that, which is shown
> on the web page. Now, I see both rain results as adjacent columns. Fine.
> But, why does Seasons not show the other plots? I had a look into the
> „logic“ of index.html.tmpl, where there is a group, containing „rain“,
> that should be displayed for day, week, month, year, if present, so far I
> can understand. But although there are files like dayrain.png and
> dayrain_t.png and dayrain_p.png, only dayrain.png is imported into
> index.html. For now, my quick and dirty solution satisfies my interest. But
> maybe someone can enlighten me, how to deal with this structure.
>
> Thanks
> Peter
>
> DrVet52 schrieb am Samstag, 12. Juli 2025 um 21:14:11 UTC+2:
>
>> Glenn McKechnie <[email protected]> schrieb am Sa., 12. Juli 2025,
>> 05:07:
>>
>>> Weewx does all the calculations, AlltimeSeasons takes them from the NOAA
>>> tables.
>>>
>>> If there is an entry in the files in the NOAA directory (for a 2nd rain
>>> gauge there won't be), those daily summaries are correctly generated (no
>>> extreme errors in data) then half the work is done. Editing the NOAA
>>> templates is interesting, but quite do-able.
>>>
>>> It then relies on the alltimes skin.conf and the historygenerator.inc
>>> page having a definition for those daily summaries. With that done, they
>>> can be displayed.
>>> That is all reasonably straightforward. YMMV.
>>>
>>> You're talking serious magic to select the "better" sensor and display
>>> it accordingly. Ditto with the mean. It could be done, but you're on your
>>> own there.
>>> Far easier to include both rain gauge types in the displayed data. IMHO
>>> that is more informative too as you'll see the differences as they happen,
>>> know which one has gone offline or started pulling its stats from mercury.
>>>
>>> I have 2 rain gauges. My allTimeSeason stats page displays them both.
>>>
>>> I do have an unreleased, tweaked version which installs as a separate
>>> skin, but is ultimately incorporated into the Seasons skin via the
>>> index.html page.
>>> It's in an unfinished state, and you would need to parse what I've done
>>> and troubleshoot as you go. I'll obviously help but you'll need to do some
>>> hard yards too.
>>>
>>> Contact me off-list and I'll send it, as time becomes available (mainly
>>> me) we should be able to get it working for a 2nd rain gauge.
>>>
>>> My email address is in the install.py file.
>>>
>>> Cheers
>>> Glenn
>>>
>>> Various WeeWx addons at
>>> https://github.com/glennmckechnie
>>>
>>>
>>>
>>> On Sat, 12 Jul 2025 at 01:48, DrVet52 <[email protected]> wrote:
>>>
>>>> Thanks, Glenn! I am glad with AlltimeSeasons, as is now. Nicht to see,
>>>> that is now installable, and does not need to be installed manually.
>>>> Although, when manually installed, it was necessary to have a look into
>>>> the
>>>> diff files, which gateway e good feeling, what was changed compared to
>>>> standard Seasons skin.
>>>> So, I think, that you know about the mechanisms of summarizing rain
>>>> data. I think, it is a better approach to do this calculations in weewx,
>>>> and not in alltimeSeasons. Because, it would be important, not to sum up
>>>> the same rain from different sensors, but either chose one ( preferably
>>>> the
>>>> "better" sensor ), or, if ther is no bias, calculate sort of statistical
>>>> mean value of the sensor data. In case of piezo vs tipping sensor, I tend
>>>> to a biased version: when tipping gives no data, take that of Piezo,
>>>> otherwise that of the tipping bucket.
>>>> What is your opinion?
>>>>
>>>> Glenn McKechnie <[email protected]> schrieb am Fr., 11. Juli 2025,
>>>> 01:42:
>>>>
>>>>>
>>>>>
>>>>> On Thu, 10 Jul 2025 at 23:03, Vetti52 <[email protected]> wrote:
>>>>> [...]
>>>>>
>>>>>
>>>>>> And, second, I would like to see the this sum in the allTime table (
>>>>>> https://github.com/glennmckechnie/alltimeSeasons), I have integrated
>>>>>> into my Season skin. As far as I can look into it, this is a small
>>>>>> version of the fuzzy-archer skin, Michael has used, right
>>>>>
>>>>>
>>>>> It's a fork of gedgers repo
>>>>> https://github.com/gedger/alltimeSeasons/
>>>>> which (in its first release in 2020) attributes
>>>>> https://github.com/brewster76/fuzzy-archer
>>>>>
>>>>> Yes, It's a simpler version and because of that origin timing it won't
>>>>> have any of the extras that the latest version of fuzzy-archer may have /
>>>>> has added.
>>>>>
>>>>> I added an extra totals column, changed some colors, then packaged it
>>>>> as an installable skin (per weewx style), and that's about it.
>>>>> Anything else would need to be adapted from the current fuzzy-archer
>>>>> and incorporated into it, or a new fork.
>>>>>
>>>>>
>>>>> Cheers
>>>>> Glenn
>>>>>
>>>>> Various WeeWx addons at
>>>>> https://github.com/glennmckechnie
>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to a topic in the
>>>>> Google Groups "weewx-user" group.
>>>>> To unsubscribe from this topic, visit
>>>>> https://groups.google.com/d/topic/weewx-user/rwdy_SwGW8o/unsubscribe.
>>>>> To unsubscribe from this group and all its topics, send an email to
>>>>> [email protected].
>>>>> To view this discussion visit
>>>>> https://groups.google.com/d/msgid/weewx-user/CAAraAzgLusKPepML6VWPiu1O2a5FPm5X-AsbPA7jALevp0V87A%40mail.gmail.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/CAAraAzgLusKPepML6VWPiu1O2a5FPm5X-AsbPA7jALevp0V87A%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To view this discussion visit
>>>> https://groups.google.com/d/msgid/weewx-user/CAO%3D2E3ktpNVSTM0Ee9uXxF7Ygysc%3DBBWbYPJO3fe8hp9J635OQ%40mail.gmail.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/CAO%3D2E3ktpNVSTM0Ee9uXxF7Ygysc%3DBBWbYPJO3fe8hp9J635OQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "weewx-user" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/weewx-user/rwdy_SwGW8o/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> [email protected].
>>>
>> To view this discussion visit
>>> https://groups.google.com/d/msgid/weewx-user/CAAraAzgE%3DuhAZ-iS%3D4TswJcMwefCHqkBSfQ%3D1%3D%3DuoVR1VxF6fA%40mail.gmail.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/CAAraAzgE%3DuhAZ-iS%3D4TswJcMwefCHqkBSfQ%3D1%3D%3DuoVR1VxF6fA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/40ef8e01-aa4a-4f70-ade8-c57419141dfbn%40googlegroups.com.
