Hi guys.
I'm having what seems to be a somewhat common issue.
I've had weewx running about 6 yrs on a Raspberry Pi 3 Model B Plus Rev 1.3
perfectly fine with weewx ver 4xxx I think it was and that after a
no-brainer install.
This stopped working when my hosting outfit was trying to fix an email
posting problem.
I've since moved to another hosting firm and trying to get weewx posting
again to a site I can check when not home.... obviously.
When I got interested in setting it up at my new host I did an update of
Buster to Linux-4.19.50-v7+-armv7l-with-debian-10.0 and weewx became ver 5.2
Anyway I've been whittling away at this for a couple of weeks and getting
no where as not linux savvy.
Have checked various posts/docs etc re the same problem but not advancing
at all and usually just shutting down with linux cmd overload.
Usually get side-tracked learning how to chase something then forget why I
want to anyway.
A bit overwhelming.
So it seems to run ok with sudo weewxd
but shows a fail with sudo systemctl status weewx
Says it using Python 3.7 but system?
python -V
Python 2.7.16
dunno if this is a problem or not.
Have attached a txt of various cmd clips that may help...
Let me know if more is needed.
I know this will be a simple fix and hopefully I can rescue my historical
data.
Thankyou for any help someone can shed on this.
cheers
ian
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/077daaac-3330-4e35-98c5-00552db5482cn%40googlegroups.com.
IsLogin:/ $ sudo cat /sys/firmware/devicetree/base/model
Raspberry Pi 3 Model B Plus Rev 1.3IsLogin:/
IsLogin:/ $ sudo systemctl restart weewx
IsLogin:/ $ sudo systemctl status weewx
● weewx.service - WeeWX
Loaded: loaded (/usr/lib/systemd/system/weewx.service; enabled; vendor
preset: enabled)
Active: failed (Result: exit-code) since Wed 2025-10-29 12:56:54 NZDT; 13s
ago
Docs: https://weewx.com/docs
Process: 985 ExecStart=/usr/bin/weewxd /etc/weewx/weewx.conf (code=exited,
status=4)
Main PID: 985 (code=exited, status=4)
Oct 29 12:56:54 Rpi3 weewxd[985]: CRITICAL weewx.engine: ****
self.serial_port = serial.Serial(self.port, self.baudrate, timeout=self.timeout)
Oct 29 12:56:54 Rpi3 weewxd[985]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialutil.py", line 240, in __init__
Oct 29 12:56:54 Rpi3 weewxd[985]: CRITICAL weewx.engine: ****
self.open()
Oct 29 12:56:54 Rpi3 weewxd[985]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialposix.py", line 268, in open
Oct 29 12:56:54 Rpi3 weewxd[985]: CRITICAL weewx.engine: **** raise
SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
Oct 29 12:56:54 Rpi3 weewxd[985]: CRITICAL weewx.engine: ****
serial.serialutil.SerialException: [Errno 13] could not open port /dev/ttyUSB0:
[Errno 13] P
Oct 29 12:56:54 Rpi3 weewxd[985]: CRITICAL __main__: Unable to load driver:
[Errno 13] could not open port /dev/ttyUSB0: [Errno 13] Permission denied:
'/dev/tt
Oct 29 12:56:54 Rpi3 weewxd[985]: CRITICAL __main__: **** Exiting...
Oct 29 12:56:54 Rpi3 systemd[1]: weewx.service: Main process exited,
code=exited, status=4/NOPERMISSION
Oct 29 12:56:54 Rpi3 systemd[1]: weewx.service: Failed with result 'exit-code'.
IsLogin:/ $
................
Is dialout ?
IsLogin:/ $ sudo $ addgroup weewx dailout
sudo: $: command not found
IsLogin:/ $ sudo addgroup weewx dailout
addgroup: The group `dailout' does not exist.
IsLogin:/ $ ls -l /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 Oct 29 12:50 /dev/ttyUSB0
IsLogin:/ $
IsLogin:/ $
IsLogin:/ $ $ adduser weewx dailout
-bash: $: command not found
IsLogin:/ $ adduser weewx dailout
adduser: Only root may add a user or group to the system.
IsLogin:/ $ sudo adduser weewx dailout
adduser: The group `dailout' does not exist.
..................................................
IsLogin:/etc $ dir
adduser.conf default hosts login.defs
pam.d resolv.conf systemd
alsa deluser.conf hosts.allow logrotate.conf
papersize resolvconf terminfo
alternatives dhcp hosts.deny logrotate.d
passwd resolv.conf.bak timezone
apache2 dhcpcd.conf idmapd.conf machine-id
passwd- resolvconf.conf timidity
apparmor dictionaries-common ifplugd magic
paxctld.conf rmt tmpfiles.d
apparmor.d dillo init magic.mime
perl rpc triggerhappy
apt dphys-swapfile init.d mailcap
pip.conf rpi-issue ucf.conf
avahi dpkg initramfs-tools mailcap.order
plymouth rsyslog.conf udev
bash.bashrc emacs inputrc manpath.config
polkit-1 rsyslog.d udisks2
bash_completion environment insserv.conf.d menu-methods
ppp RTIMULib.ini ufw
bash_completion.d fb.modes iproute2 mime.types
profile securetty update-motd.d
bindresvport.blacklist fonts issue mke2fs.conf
profile.d security usb_modeswitch.conf
binfmt.d fstab issue.net modprobe.d
protocols selinux usb_modeswitch.d
bluetooth fuse.conf kernel modules
pulse sensors3.conf vdpau_wrapper.cfg
ca-certificates gai.conf ldap modules-load.d
python sensors.d vim
ca-certificates.conf gdb ld.so.cache motd
python2.7 services vnc
calendar ghostscript ld.so.conf mtab
python3 sgml vulkan
chromium-browser glvnd ld.so.conf.d nanorc
python3.7 shadow weewx
cifs-utils gnome ld.so.preload netconfig
rc0.d shadow- wgetrc
console-setup groff libaudit.conf network
rc1.d shells wpa_supplicant
cron.d group libblockdev NetworkManager
rc2.d skel X11
cron.daily group- libnl-3 networks
rc3.d ssh xattr.conf
cron.hourly gshadow libpaper.d nsswitch.conf
rc4.d ssl xdg
cron.monthly gshadow- lightdm ntp.conf
rc5.d subgid xml
crontab gss lighttpd openal
rc6.d subuid
cron.weekly gtk-2.0 locale.alias opt
rc.local sudoers
dbus-1 gtk-3.0 locale.gen os-release
rcS.d sudoers.d
debconf.conf host.conf localtime PackageKit
request-key.conf sysctl.conf
debian_version hostname logcheck pam.conf
request-key.d sysctl.d
IsLogin:/etc $ cd weewx
IsLogin:/etc/weewx $ dir
apache bin examples import init.d logrotate.d logwatch rsyslog.d skins
systemd udev weewx.conf weewx.conf.20251031095236 weewx.conf-5.2.0
...................................................
IsLogin:/ $ sudo systemctl status weewx
● weewx.service - WeeWX
Loaded: loaded (/usr/lib/systemd/system/weewx.service; enabled; vendor
preset: enabled)
Active: failed (Result: exit-code) since Fri 2025-10-31 09:57:17 NZDT; 15min
ago
Docs: https://weewx.com/docs
Process: 410 ExecStart=/usr/bin/weewxd /etc/weewx/weewx.conf (code=exited,
status=4)
Main PID: 410 (code=exited, status=4)
Oct 31 09:57:17 Rpi3 weewxd[410]: CRITICAL weewx.engine: ****
self.serial_port = serial.Serial(self.port, self.baudrate, timeout=self.
Oct 31 09:57:17 Rpi3 weewxd[410]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialutil.py", line 240, in _
Oct 31 09:57:17 Rpi3 weewxd[410]: CRITICAL weewx.engine: ****
self.open()
Oct 31 09:57:17 Rpi3 weewxd[410]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialposix.py", line 268, in
Oct 31 09:57:17 Rpi3 weewxd[410]: CRITICAL weewx.engine: **** raise
SerialException(msg.errno, "could not open port {}: {}".format(sel
Oct 31 09:57:17 Rpi3 weewxd[410]: CRITICAL weewx.engine: ****
serial.serialutil.SerialException: [Errno 13] could not open port /dev/ttyUS
Oct 31 09:57:17 Rpi3 weewxd[410]: CRITICAL __main__: Unable to load driver:
[Errno 13] could not open port /dev/ttyUSB0: [Errno 13] Permission
Oct 31 09:57:17 Rpi3 weewxd[410]: CRITICAL __main__: **** Exiting...
Oct 31 09:57:17 Rpi3 systemd[1]: weewx.service: Main process exited,
code=exited, status=4/NOPERMISSION
Oct 31 09:57:17 Rpi3 systemd[1]: weewx.service: Failed with result 'exit-code'.
IsLogin:/ $
....................................
python ver ?
nano /usr/bin/weectl
#!/bin/sh
app=weectl.py
# Get the weewx location and interpreter. Default to something sane, but
# look for overrides from the system defaults.
WEEWX_BINDIR=/usr/share/weewx
WEEWX_PYTHON=python3.7
[ -r /etc/default/weewx ] && . /etc/default/weewx
exec "$WEEWX_PYTHON" $WEEWX_PYTHON_ARGS "$WEEWX_BINDIR/$app" "$@"
but then
IsLogin:~ $ python -V
Python 2.7.16
..................................
IsLogin: sudo weewxd
Using configuration file /etc/weewx/weewx.conf
REC: 2025-10-30 05:30:00 NZDT (1761755400) altimeter: 30.128659659454723,
appTemp: 46.06007835046544, barometer: 30.132, cloudbase: 541.0, dateTime:
1761755400, dewpoint: 46.8, ET: 0.0, forecastRule: 44, heatindex: 45.88,
highOutTemp: 46.8, humidex: 47.70820497455965, inDewpoint: 48.25871640944753,
inHumidity: 64.0, inTemp: 60.5, interval: 30, lowOutTemp: 46.7, maxSolarRad:
0.0, outHumidity: 100.0, outTemp: 46.8, pressure: 29.542376452538047, rain:
0.0, rainRate: 0.0, rxCheckPercent: 98.65624999999999, usUnits: 1,
wind_samples: 693.0, windchill: 46.8, windDir: None, windGust: 1.0,
windGustDir: 270.0, windrun: 0.0, windSpeed: 0.0
REC: 2025-10-30 06:00:00 NZDT (1761757200) altimeter: 30.126667258390142,
appTemp: 46.06007835046544, barometer: 30.13, cloudbase: 541.0, dateTime:
1761757200, dewpoint: 46.8,
...................
Reboot
login as: pi
IsLogin's password:
Linux Rpi3 4.19.50-v7+ #896 SMP Thu Jun 20 16:11:44 BST 2019 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Feb 14 23:12:09 2019
SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to
set
a new password.
IsLogin:~ $ sudo systemctl status weewx
● weewx.service - WeeWX
Loaded: loaded (/usr/lib/systemd/system/weewx.service; enabled; vendor
preset: enabled)
Active: active (running) since Thu 2019-02-14 23:12:03 NZDT; 49s ago
Docs: https://weewx.com/docs
Main PID: 416 (python3)
Tasks: 1 (limit: 2200)
Memory: 13.2M
CGroup: /system.slice/weewx.service
└─416 python3 /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:05 NZ
Feb 14 23:12:11 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:11 NZ
Feb 14 23:12:16 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:16 NZ
Feb 14 23:12:21 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:21 NZ
Feb 14 23:12:26 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:26 NZ
Feb 14 23:12:31 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:31 NZ
Feb 14 23:12:36 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:36 NZ
Feb 14 23:12:41 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:41 NZ
Feb 14 23:12:46 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:46 NZ
Feb 14 23:12:51 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:51 NZ
IsLogin:~ $ sudo systemctl status weewx
● weewx.service - WeeWX
Loaded: loaded (/usr/lib/systemd/system/weewx.service; enabled; vendor
preset: enabled)
Active: failed (Result: exit-code) since Sun 2025-11-02 18:15:24 NZDT; 2min
21s ago
Docs: https://weewx.com/docs
Process: 416 ExecStart=/usr/bin/weewxd /etc/weewx/weewx.conf (code=exited,
status=4)
Main PID: 416 (code=exited, status=4)
Nov 02 18:15:24 Rpi3 weewxd[416]: CRITICAL weewx.engine: ****
self.serial_port = serial.Serial(self.port, self.baudrate, timeout=self.timeout)
Nov 02 18:15:24 Rpi3 weewxd[416]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialutil.py", line 240, in __init__
Nov 02 18:15:24 Rpi3 weewxd[416]: CRITICAL weewx.engine: ****
self.open()
Nov 02 18:15:24 Rpi3 weewxd[416]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialposix.py", line 268, in open
Nov 02 18:15:24 Rpi3 weewxd[416]: CRITICAL weewx.engine: **** raise
SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
Nov 02 18:15:24 Rpi3 weewxd[416]: CRITICAL weewx.engine: ****
serial.serialutil.SerialException: [Errno 13] could not open port /dev/ttyUSB0:
[Errno 13] Perm
Nov 02 18:15:24 Rpi3 weewxd[416]: CRITICAL __main__: Unable to load driver:
[Errno 13] could not open port /dev/ttyUSB0: [Errno 13] Permission denied:
'/dev/ttyUS
Nov 02 18:15:24 Rpi3 weewxd[416]: CRITICAL __main__: **** Exiting...
Nov 02 18:15:24 Rpi3 systemd[1]: weewx.service: Main process exited,
code=exited, status=4/NOPERMISSION
Nov 02 18:15:24 Rpi3 systemd[1]: weewx.service: Failed with result 'exit-code'.
IsLogin:~ $
after a bit....
IsLogin:~ $
IsLogin:~ $ sudo systemctl restart weewx
IsLogin:~ $ sudo systemctl status weewx
● weewx.service - WeeWX
Loaded: loaded (/usr/lib/systemd/system/weewx.service; enabled; vendor
preset: enabled)
Active: failed (Result: exit-code) since Sun 2025-11-02 18:53:35 NZDT; 7s ago
Docs: https://weewx.com/docs
Process: 918 ExecStart=/usr/bin/weewxd /etc/weewx/weewx.conf (code=exited,
status=4)
Main PID: 918 (code=exited, status=4)
Nov 02 18:53:35 Rpi3 weewxd[918]: CRITICAL weewx.engine: ****
self.serial_port = serial.Serial(self.port, self.baudrate, timeout=self.timeout)
Nov 02 18:53:35 Rpi3 weewxd[918]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialutil.py", line 240, in __init__
Nov 02 18:53:35 Rpi3 weewxd[918]: CRITICAL weewx.engine: ****
self.open()
Nov 02 18:53:35 Rpi3 weewxd[918]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialposix.py", line 268, in open
Nov 02 18:53:35 Rpi3 weewxd[918]: CRITICAL weewx.engine: **** raise
SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
Nov 02 18:53:35 Rpi3 weewxd[918]: CRITICAL weewx.engine: ****
serial.serialutil.SerialException: [Errno 13] could not open port /dev/ttyUSB0:
[Errno 13] Permission denied:
Nov 02 18:53:35 Rpi3 weewxd[918]: CRITICAL __main__: Unable to load driver:
[Errno 13] could not open port /dev/ttyUSB0: [Errno 13] Permission denied:
'/dev/ttyUSB0'
Nov 02 18:53:35 Rpi3 weewxd[918]: CRITICAL __main__: **** Exiting...
Nov 02 18:53:35 Rpi3 systemd[1]: weewx.service: Main process exited,
code=exited, status=4/NOPERMISSION
Nov 02 18:53:35 Rpi3 systemd[1]: weewx.service: Failed with result 'exit-code'.
IsLogin:~ $
................
IsLogin:~ $ sudo grep weewxd /var/log/messages |tail -100
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Initializing weewxd version
5.2.0
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Command line:
/usr/share/weewx/weewxd.py
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Using Python: 3.7.3 (default,
Apr 3 2019, 05:39:12) #012[GCC 8.2.0]
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Located at: /usr/bin/python3
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Platform:
Linux-4.19.50-v7+-armv7l-with-debian-10.0
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Locale: 'en_NZ.UTF-8'
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Entry path:
/usr/share/weewx/weewxd.py
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: WEEWX_ROOT: /etc/weewx
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Config file:
/etc/weewx/weewx.conf
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: User module:
/etc/weewx/bin/user
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Debug: 1
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: User: root
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Group: root
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO __main__: Groups: root
Nov 2 17:51:47 Rpi3 weewxd[2688]: INFO weewx.engine: Loading station type
Vantage (weewx.drivers.vantage)
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.engine: StdConvert target unit is
0x1
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.wxservices: StdWXCalculate will
use data binding wx_binding
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.engine: Archive will use data
binding wx_binding
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.engine: Record generation will be
attempted in 'hardware'
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.engine: Using archive interval of
1800 seconds (specified by hardware)
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.restx: StationRegistry: Station
will be registered.
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.restx: Wunderground: Posting not
enabled.
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.restx: PWSweather: Posting not
enabled.
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.restx: CWOP: Data for station
ZL2IH will be posted
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.restx: WOW: Posting not enabled.
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.restx: WOW-BE: Posting not
enabled.
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.restx: AWEKAS: Posting not
enabled.
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO weewx.engine: 'pyephem' detected,
extended almanac data is available
Nov 2 17:51:48 Rpi3 weewxd[2688]: INFO __main__: Starting up weewx version
5.2.0
Nov 2 17:51:49 Rpi3 weewxd[2688]: INFO weewx.engine: Clock error is -2.06
seconds (positive is fast)
Nov 2 17:51:49 Rpi3 weewxd[2688]: INFO weewx.engine: Using binding
'wx_binding' to database 'weewx.sdb'
Nov 2 17:51:49 Rpi3 weewxd[2688]: INFO weewx.manager: Starting backfill of
daily summaries
Nov 2 17:51:49 Rpi3 weewxd[2688]: INFO weewx.manager: Daily summaries up to
date
Nov 2 17:51:49 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
05:30:00 NZDT (1761755400) to database 'weewx.sdb'
Nov 2 17:51:50 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
05:30:00 NZDT (1761755400) to daily summary in 'weewx.sdb'
Nov 2 17:51:51 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
06:00:00 NZDT (1761757200) to database 'weewx.sdb'
Nov 2 17:51:51 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
06:00:00 NZDT (1761757200) to daily summary in 'weewx.sdb'
Nov 2 17:51:51 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
06:30:00 NZDT (1761759000) to database 'weewx.sdb'
Nov 2 17:51:51 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
06:30:00 NZDT (1761759000) to daily summary in 'weewx.sdb'
Nov 2 17:51:52 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
07:00:00 NZDT (1761760800) to database 'weewx.sdb'
Nov 2 17:51:52 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
07:00:00 NZDT (1761760800) to daily summary in 'weewx.sdb'
Nov 2 17:51:53 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
07:30:00 NZDT (1761762600) to database 'weewx.sdb'
Nov 2 17:51:53 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
07:30:00 NZDT (1761762600) to daily summary in 'weewx.sdb'
Nov 2 17:51:54 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
08:00:00 NZDT (1761764400) to database 'weewx.sdb'
Nov 2 17:51:54 Rpi3 weewxd[2688]: INFO weewx.manager: Added record 2025-10-30
08:00:00 NZDT (1761764400) to daily summary in 'weewx.sdb'
Nov 2 17:51:54 Rpi3 weewxd[2688]: INFO weewx.engine: Main loop exiting.
Shutting engine down.
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Initializing weewxd version
5.2.0
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Command line:
/usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Using Python: 3.7.3 (default,
Apr 3 2019, 05:39:12) #012[GCC 8.2.0]
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Located at: /usr/bin/python3
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Platform:
Linux-4.19.50-v7+-armv7l-with-debian-10.0
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Locale: 'en_NZ.UTF-8'
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Entry path:
/usr/share/weewx/weewxd.py
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: WEEWX_ROOT: /etc/weewx
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Config file:
/etc/weewx/weewx.conf
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: User module:
/etc/weewx/bin/user
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Debug: 1
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: User: weewx
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Group: weewx
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Groups: weewx
Feb 14 23:12:06 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:05 NZDT (1550139125)
Feb 14 23:12:11 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:11 NZDT (1550139131)
Feb 14 23:12:16 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:16 NZDT (1550139136)
Feb 14 23:12:21 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:21 NZDT (1550139141)
Feb 14 23:12:26 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:26 NZDT (1550139146)
Feb 14 23:12:31 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:31 NZDT (1550139151)
Feb 14 23:12:36 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:36 NZDT (1550139156)
Feb 14 23:12:41 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:41 NZDT (1550139161)
Feb 14 23:12:46 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:46 NZDT (1550139166)
Feb 14 23:12:51 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:51 NZDT (1550139171)
Feb 14 23:12:56 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:12:56 NZDT (1550139176)
Feb 14 23:13:01 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:13:01 NZDT (1550139181)
Feb 14 23:13:06 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:13:06 NZDT (1550139186)
Feb 14 23:13:11 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:13:11 NZDT (1550139191)
Feb 14 23:13:16 Rpi3 weewxd[416]: INFO __main__: Waiting for sane time. File
time is 2025-10-28 16:00:22 NZDT (1761620422); current time is 2019-02-14
23:13:16 NZDT (1550139196)
Nov 2 18:15:24 Rpi3 weewxd[416]: INFO weewx.engine: Loading station type
Vantage (weewx.drivers.vantage)
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Initializing weewxd version
5.2.0
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Command line:
/usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Using Python: 3.7.3 (default,
Apr 3 2019, 05:39:12) #012[GCC 8.2.0]
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Located at: /usr/bin/python3
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Platform:
Linux-4.19.50-v7+-armv7l-with-debian-10.0
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Locale: 'en_NZ.UTF-8'
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Entry path:
/usr/share/weewx/weewxd.py
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: WEEWX_ROOT: /etc/weewx
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Config file:
/etc/weewx/weewx.conf
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: User module:
/etc/weewx/bin/user
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Debug: 1
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: User: weewx
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Group: weewx
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO __main__: Groups: weewx
Nov 2 18:53:35 Rpi3 weewxd[918]: INFO weewx.engine: Loading station type
Vantage (weewx.drivers.vantage)
IsLogin:~ $
