If your pi is dropping carrier you have a physical problem and traceroute will not help. You can’t trace a route if your pi is disconnected. The open question is why it is dropping carrier.
If you can plug the pi4 in as a second computer and see if ‘that’ is also unstable that might help determine if your pi or the router is the culprit. Having a second pi online would also help if you need to migrate to a new pi. I do like the ‘on this date’ page but perhaps that is causing some load to calculate. You could alternately disable that and the camera stuff to get to less load on the pi. Basically nibble away at it one thing at a time. Definitely save your current setup offline just in case…. On Sunday, May 24, 2026 at 5:15:46 AM UTC-7 John Smith wrote: > What about traceroute to the server from your rpi? > > On Sun, 24 May 2026 at 22:12, Robin <[email protected]> wrote: > >> I've just checked the CPU temperature and it was between 50.8 and 52.5 >> for the time I was wtching. vcgencmd get_throttled also reported 0x0. >> On Sunday, 24 May 2026 at 12:27:23 UTC+3 John Smith wrote: >> >>> The pi is only running weewx and capturing an image from our webcam. The >>>> load will be at it's highest when processing the image. >>> >>> >>> weeWX itself chews CPU time when processing reports too as it has to do >>> sqlite/database queries etc so if the CPU heats up doing all that and then >>> fails the next step because of it... >>> >>> To find out for sure you'd have to manually trigger rsync when it's been >>> idle a while and cooled down. >>> >>> Have you tried to traceroute from the system running weewx to the >>> server? and everything else I suggeted? >>> >>> On Sun, 24 May 2026 at 19:11, Robin <[email protected]> wrote: >>> >>>> The pi is only running weewx and capturing an image from our webcam. >>>> The load will be at it's highest when processing the image. I would have >>>> said that it does this without problem, but now I'm lost as to where to >>>> look for answers. >>>> >>>> I'm running out of things to try. Perhaps my spare rpi4 needs to be put >>>> into service. Its 10 years plus since I last did an install and then added >>>> all my bits and bobs, so it might take me a while to relearn everything. >>>> >>>> If anyone is interested, my site is at http://www.weather.molyvos.eu/ >>>> >>>> Thank you for your thoughts, wish me luck! >>>> >>>> Robin >>>> >>>> On Sunday, 24 May 2026 at 10:06:34 UTC+3 John Smith wrote: >>>> >>>>> I've tried shutdowns, unplugging everything, waiting while I drink my >>>>>> tea then reconnecting everything and switching back on. Things seems >>>>>> more >>>>>> stable for a while, but the instability remains. >>>>> >>>>> >>>>> In that case it might be heat related, does it become more unstable if >>>>> it's under sustained load? >>>>> >>>>> On Sun, 24 May 2026 at 16:46, Robin <[email protected]> wrote: >>>>> >>>>>> Vince, >>>>>> Thank you. >>>>>> The pi is connected to a Davis Vantage Pro Plus via a Data Logger so >>>>>> there is no power drain and directly to a TP Link Deco X50. >>>>>> I am powering the pi with a WaveShare Uninterruptible Power Supply. >>>>>> I've tried shutdowns, unplugging everything, waiting while I drink my >>>>>> tea then reconnecting everything and switching back on. Things seems >>>>>> more >>>>>> stable for a while, but the instability remains. >>>>>> >>>>>> Regards >>>>>> Robin >>>>>> >>>>>> On Sunday, 24 May 2026 at 09:10:56 UTC+3 Vince Skahan wrote: >>>>>> >>>>>>> You need to tell us what device your pi seems to be plugged into, >>>>>>> what station you have, and how the station is connected to weewx. >>>>>>> >>>>>>> If your pi loses carrier either the pi or whatever it is plugged >>>>>>> into is getting unstable and the pi is disconnected from your home >>>>>>> network >>>>>>> just as if you unplugged it. It is not obvious which device is the >>>>>>> cause. >>>>>>> >>>>>>> Possible solutions are (a) replace the pi with a pi3 pi4 or pi5 or >>>>>>> another linux box or (b) replace or reboot whatever you are plugged >>>>>>> into. >>>>>>> >>>>>>> I have seen modelB and zeroW eventually get too unstable to use but >>>>>>> that was wifi not ethernet. It is also possible you have bad power to >>>>>>> the >>>>>>> pi or maybe too many things attached to the pi usb bus. The modelB >>>>>>> architecture somewhat shared things under the hood for usb and ethernet >>>>>>> so >>>>>>> it was possible to overload the system. >>>>>>> >>>>>>> Those issues went away when the pi3 came out as far as I ever saw. I >>>>>>> sold/junked all my modelB years ago. >>>>>>> >>>>>>> I would start with (b) above. Power down and unplug whatever your pi >>>>>>> plugs into. Wait 30 seconds or so. Plug it back in and power it back >>>>>>> up. >>>>>>> See if that helps. >>>>>>> >>>>>>> This all assumes you have changed nothing physically of course. If >>>>>>> you 'have' touched things physically then you might try >>>>>>> unplugging/plugging >>>>>>> the ethernet cables in again on both sides making sure they click >>>>>>> securely >>>>>>> into place. >>>>>>> >>>>>>> But I'd power reset whatever your pi is plugged into as the first >>>>>>> step.... >>>>>>> >>>>>>> On Saturday, May 23, 2026 at 10:39:30 PM UTC-7 Robin wrote: >>>>>>> >>>>>>>> John, I think I have not explained my problem correctly. My >>>>>>>> standard weewx install of v3.8.0 has been running without issues for >>>>>>>> many >>>>>>>> years. Everything that is reported in the syslog is there because it >>>>>>>> is >>>>>>>> part of the standard weewx install. The error you have focused on is >>>>>>>> the >>>>>>>> rpi trying to rsync to my internet host. I am convinced (although I >>>>>>>> might >>>>>>>> be wrong) that this is a symptom of the instabilty and not the cause >>>>>>>> of >>>>>>>> the instability. When the system is stable rsync works perfectly. I >>>>>>>> posted >>>>>>>> the syslog as I hoped it might point towards the cause of the >>>>>>>> instability, >>>>>>>> which is new. >>>>>>>> >>>>>>>> I am trying to track down the source of the instability. A new SD >>>>>>>> card changed nothing. So where do I look next. As mentioned above, I >>>>>>>> have >>>>>>>> done no OS updates since I installed V3.8.0 which was before July 2019. >>>>>>>> >>>>>>>> On Saturday, 23 May 2026 at 19:13:33 UTC+3 John Smith wrote: >>>>>>>> >>>>>>>>> I removed part of the server name as it is hidden by my host for >>>>>>>>>> security reasons. >>>>>>>>> >>>>>>>>> >>>>>>>>> Security by obscurity isn't security. Even the domain alone is a >>>>>>>>> good place to start >>>>>>>>> <https://duckduckgo.com/?q=site%3Awebspace-data.io+-kdfjkjsdghkjgsfkjsfd> >>>>>>>>> . >>>>>>>>> >>>>>>>>> Then you have Shodan >>>>>>>>> <https://en.wikipedia.org/wiki/Shodan_(website)> which lets >>>>>>>>> people search for open ports etc. >>>>>>>>> >>>>>>>>> I am wondering if I have a failing hardware issue with either the >>>>>>>>>> rpi or an issue with my router. >>>>>>>>> >>>>>>>>> >>>>>>>>> Bit hard to tell remotely, but unlikely given there was a ssh >>>>>>>>> timeout, it would be more likely to be something misconfigured. >>>>>>>>> >>>>>>>>> Is it possible that avahi-daemon and dhcpcd entries point to >>>>>>>>>> local network problems? >>>>>>>>> >>>>>>>>> >>>>>>>>> You shouldn't use DHCP for servers as everything goes down in a >>>>>>>>> heap when the server does, same with Avahi, it's just a really bad >>>>>>>>> idea for >>>>>>>>> servers, however neither of those would cause connection timeouts for >>>>>>>>> remote hosts. >>>>>>>>> >>>>>>>>> First thing to do is try doing a ping to the host name from the >>>>>>>>> system running weeWX, if that fails try doing a traceroute to try and >>>>>>>>> figure out where it's failing. >>>>>>>>> >>>>>>>>> If either of those work trying telnet-ing to port 22 to see if you >>>>>>>>> can get a basic connection to the ssh port. >>>>>>>>> >>>>>>>>> On Sun, 24 May 2026 at 00:34, Robin <[email protected]> wrote: >>>>>>>>> >>>>>>>>>> Hi John, >>>>>>>>>> >>>>>>>>>> I removed part of the server name as it is hidden by my host for >>>>>>>>>> security reasons. The exact same configuration ran perfectly before >>>>>>>>>> and >>>>>>>>>> ,since I asked for help, is running perfectly again. >>>>>>>>>> >>>>>>>>>> I am wondering if I have a failing hardware issue with either the >>>>>>>>>> rpi or an issue with my router. Is it possible that avahi-daemon >>>>>>>>>> and dhcpcd entries point to local network problems? >>>>>>>>>> >>>>>>>>>> On Saturday, 23 May 2026 at 16:37:29 UTC+3 John Smith wrote: >>>>>>>>>> >>>>>>>>>>> ssh: Could not resolve hostname ############webspace-data.io: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Seems to be a DNS issue, as I got nothing back from the name >>>>>>>>>>> servers >>>>>>>>>>> >>>>>>>>>>> On Sat, 23 May 2026 at 16:19, Robin <[email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> I installed weewx as a newbie, 12 years ago. Since then it has >>>>>>>>>>>> run without any issues. Recently, things have changed. I have >>>>>>>>>>>> forgotten the >>>>>>>>>>>> stuff that I learned to get weewx up and running and my brain is >>>>>>>>>>>> less >>>>>>>>>>>> capable of learning new stuff. Please can somebody point me in the >>>>>>>>>>>> right >>>>>>>>>>>> direction. >>>>>>>>>>>> >>>>>>>>>>>> Hardware is a Raspberry Pi Model B (512MB). >>>>>>>>>>>> The last update I did to any software on the Pi was to upgrade >>>>>>>>>>>> to V3.8.0. >>>>>>>>>>>> >>>>>>>>>>>> Syslog give me lots of stuff I don't recognise or understand. >>>>>>>>>>>> >>>>>>>>>>>> May 23 09:01:01 MWS avahi-daemon[208]: New relevant interface >>>>>>>>>>>> eth0.IPv4 for mDNS. >>>>>>>>>>>> May 23 09:01:01 MWS avahi-daemon[208]: Registering new address >>>>>>>>>>>> record for 192.168.1.25 on eth0.IPv4. >>>>>>>>>>>> May 23 09:01:01 MWS dhcpcd[371]: eth0: adding route to >>>>>>>>>>>> 192.168.0.0/22 >>>>>>>>>>>> May 23 09:01:01 MWS dhcpcd[371]: eth0: adding default route via >>>>>>>>>>>> 192.168.1.1 >>>>>>>>>>>> May 23 09:01:11 MWS weewx[1099]: cheetahgenerator: Generated 22 >>>>>>>>>>>> files for report StandardReport in 53.11 seconds >>>>>>>>>>>> May 23 09:01:15 MWS systemd[1]: Started Session c6 of user root. >>>>>>>>>>>> May 23 09:01:44 MWS weewx[1099]: imagegenerator: Generated 31 >>>>>>>>>>>> images for StandardReport in 32.29 seconds >>>>>>>>>>>> May 23 09:01:44 MWS weewx[1099]: copygenerator: copied 13 files >>>>>>>>>>>> to /var/www/weewx >>>>>>>>>>>> May 23 09:01:52 MWS weewx[1099]: historygenerator.pyc: >>>>>>>>>>>> Generated 8 tables in 7.69 seconds >>>>>>>>>>>> May 23 09:01:55 MWS weewx[1099]: cheetahgenerator: Generated 2 >>>>>>>>>>>> files for report HTMLPages in 10.73 seconds >>>>>>>>>>>> May 23 09:01:55 MWS weewx[1099]: copygenerator: copied 3 files >>>>>>>>>>>> to /var/www/weewx/Bootstrap >>>>>>>>>>>> May 23 09:01:57 MWS dhcpcd[371]: eth0: carrier lost >>>>>>>>>>>> May 23 09:01:57 MWS kernel: [ 619.007806] smsc95xx 1-1.1:1.0 >>>>>>>>>>>> eth0: link down >>>>>>>>>>>> May 23 09:01:57 MWS dhcpcd[371]: eth0: deleting default route >>>>>>>>>>>> via 192.168.1.1 >>>>>>>>>>>> May 23 09:01:57 MWS dhcpcd[371]: eth0: deleting route to >>>>>>>>>>>> 192.168.0.0/22 >>>>>>>>>>>> May 23 09:01:57 MWS avahi-daemon[208]: Withdrawing address >>>>>>>>>>>> record for 192.168.1.25 on eth0. >>>>>>>>>>>> May 23 09:01:57 MWS avahi-daemon[208]: Leaving mDNS multicast >>>>>>>>>>>> group on interface eth0.IPv4 with address 192.168.1.25. >>>>>>>>>>>> May 23 09:01:57 MWS avahi-daemon[208]: Interface eth0.IPv4 no >>>>>>>>>>>> longer relevant for mDNS. >>>>>>>>>>>> May 23 09:01:58 MWS kernel: [ 620.679675] smsc95xx 1-1.1:1.0 >>>>>>>>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 >>>>>>>>>>>> May 23 09:01:58 MWS dhcpcd[371]: eth0: carrier acquired >>>>>>>>>>>> May 23 09:01:58 MWS dhcpcd[371]: eth0: rebinding lease of >>>>>>>>>>>> 192.168.1.25 >>>>>>>>>>>> May 23 09:01:58 MWS dhcpcd[371]: eth0: probing address >>>>>>>>>>>> 192.168.1.25/22 >>>>>>>>>>>> May 23 09:02:00 MWS weewx[1099]: rsyncupload: [['rsync', >>>>>>>>>>>> '--archive', '--stats', '-e ssh', '/var/www/weewx/', >>>>>>>>>>>> ##################.webspace-data.io:/kunden/homepages/###########/htdocs/weather']] >>>>>>>>>>>> >>>>>>>>>>>> reported errors: ssh: Could not resolve hostname ############ >>>>>>>>>>>> webspace-data.io: Temporary failure in name resolution. rsync: >>>>>>>>>>>> connection unexpectedly closed (0 bytes received so far) [sender]. >>>>>>>>>>>> rsync >>>>>>>>>>>> error: error in rsync protocol data stream (code 12) at io.c(235) >>>>>>>>>>>> [sender=3.1.2] >>>>>>>>>>>> May 23 09:02:00 MWS weewx[1099]: rsyncupload: rsync executed in >>>>>>>>>>>> 5.15 seconds >>>>>>>>>>>> May 23 09:02:03 MWS dhcpcd[371]: eth0: leased 192.168.1.25 for >>>>>>>>>>>> 7200 seconds >>>>>>>>>>>> May 23 09:02:03 MWS dhcpcd[371]: eth0: adding route to >>>>>>>>>>>> 192.168.0.0/22 >>>>>>>>>>>> May 23 09:02:03 MWS dhcpcd[371]: eth0: adding default route via >>>>>>>>>>>> 192.168.1.1 >>>>>>>>>>>> May 23 09:02:03 MWS avahi-daemon[208]: Joining mDNS multicast >>>>>>>>>>>> group on interface eth0.IPv4 with address 192.168.1.25. >>>>>>>>>>>> May 23 09:02:03 MWS avahi-daemon[208]: New relevant interface >>>>>>>>>>>> eth0.IPv4 for mDNS. >>>>>>>>>>>> May 23 09:02:03 MWS avahi-daemon[208]: Registering new address >>>>>>>>>>>> record for 192.168.1.25 on eth0.IPv4. >>>>>>>>>>>> >>>>>>>>>>>> Please make an old man happy. Any help would be great, Where do >>>>>>>>>>>> I start? >>>>>>>>>>>> >>>>>>>>>>>> Robin >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> To view this discussion visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/999b4352-63da-4dd7-b019-dfa11aa4a1b5n%40googlegroups.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/999b4352-63da-4dd7-b019-dfa11aa4a1b5n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> >>>>>>>>> To view this discussion visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/f1743398-54cb-4c90-a3b9-f45ce46e8abfn%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/f1743398-54cb-4c90-a3b9-f45ce46e8abfn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> >>>>> To view this discussion visit >>>>>> https://groups.google.com/d/msgid/weewx-user/028dd4fd-5ce7-4aae-a291-22cf2be5989dn%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/028dd4fd-5ce7-4aae-a291-22cf2be5989dn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion visit >>>> https://groups.google.com/d/msgid/weewx-user/c5892c9c-13be-4775-ae6b-2bd858b371e5n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/c5892c9c-13be-4775-ae6b-2bd858b371e5n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion visit >> https://groups.google.com/d/msgid/weewx-user/c4fca004-0528-4359-9041-cd64c27f5810n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/c4fca004-0528-4359-9041-cd64c27f5810n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/ebba534e-75a8-4763-b841-796796a0e8ban%40googlegroups.com.
