Aurélien Gâteau wrote: > On Friday 21 September 2007 15:15:24 Alejandro Cabrera Obed wrote: > >> Aurélien Gâteau wrote: >> >>> On Wednesday 19 September 2007 11:37:12 Aurélien Gâteau wrote: >>> >>>> On Tuesday 18 September 2007 16:20:03 Alejandro Cabrera Obed wrote: >>>> >>>>> But I need one more help: after run "alsaconf" and "alsamixer" on my >>>>> Debian console, I execute "LD_LIBRARY_PATH=. ./wengophone" and >>>>> wengophone starts but when I chose the input, output and ringing device >>>>> as "ALSA default" but I get this warning message (the audio tests are >>>>> OK): >>>>> >>>>> (warn) 11:13:26 static EnumDeviceType::DeviceType >>>>> EnumDeviceType::toDeviceType(const std::string&): unknown DeviceType= >>>>> >>>> I just fixed a bug which would cause this warning if you selected a >>>> different audio device from the config dialog. It's in revision 12703. >>>> It should be out on download.wengo.com/nightlybuilds/ soon. We have a >>>> problem with the Linux builders right now. I'll let you know when it's >>>> fixed. >>>> >>> Linux builders are back. You can get the latest version here: >>> http://download.wengo.com/nightlybuilds/binary/NG/GNULinux/2.2/WengoPhone >>> -2.2-minsizerel-alsa-12703.tar.bz2 >>> >>> Aurélien >>> >> Aurelien, I've installed wengophone-2.2-minsizerel-alsa-12703 in my >> Linux Debian Etch machines from my Intranet as you told me, I setup alsa >> sound (alsaconf and alsamixer) and after that I tried to establish a SIP >> call between two wengo users. We could hear the ringing but we couldn't >> hear the voice. The audio device was established as "ALSA default" and >> "Intel ICH5" also but we never hear the voice at any time. The terminal >> where I executed wengo show this log: >> >> [EMAIL PROTECTED]:~/WengoPhone-2.2-minsizerel$ ./wengophone.sh >> (info) 09:47:42 void QtLanguage::loadLanguageFromConfig(): no Qt >> translation ava ilable for locale '' >> (info) 09:47:42 void QtLanguage::loadLanguageFromConfig(): no >> application transl ation available for locale '' >> QProcess: Destroyed while process is still running. >> (info) 09:48:16 Wenbox::Wenbox(): Wenbox dll not loaded >> (info) 09:48:16 virtual void PhApiWrapper::setCallsEncryption(bool): Set >> call en cryption to:1 >> (error) 09:48:43 void >> IMChatSession::typingStateChangedEventHandler(IMChat&, IMC hatSession&, >> const std::string&, IMChat::TypingState): this session does not kno w >> [EMAIL PROTECTED]/WengoPhone >> (error) 09:48:44 void >> IMChatSession::typingStateChangedEventHandler(IMChat&, IMC hatSession&, >> const std::string&, IMChat::TypingState): this session does not kno w >> [EMAIL PROTECTED]/WengoPhone >> (error) 09:49:06 void >> IMChatSession::typingStateChangedEventHandler(IMChat&, IMC hatSession&, >> const std::string&, IMChat::TypingState): this session does not kno w >> [EMAIL PROTECTED]/WengoPhone >> (error) 09:49:06 void >> IMChatSession::typingStateChangedEventHandler(IMChat&, IMC hatSession&, >> const std::string&, IMChat::TypingState): this session does not kno w >> [EMAIL PROTECTED]/WengoPhone >> Timer: pthread_create: Success >> (info) 09:49:24 virtual bool PhApiWrapper::isCallEncrypted(int): Call >> with callI d 1 has encryption mode 0 >> >> >> I repeat that when I use Twinkle or any other SIP softphone I CAN >> establish a call and I CAN hear the voice very well. >> >> Any suggestion or trick you can tell me ??? >> > > I am going to be out of tricks soon :-(. Can you try this: > - Establish a conversion between Twinkle and WengoPhone, see if at least you > get sound in one way. > - Try to send DTMF sounds from the WengoPhone, to see if they reach the peer. > > Aurélien > Thanks Aurelien, now I can't do this test because the testing machines are busy. But I have a last question:
- My SIP clients are in 10.10.x.x network - My SIP server is in 172.1.x.x network - I don't use NAT for clients to get the SIP server When I start wengophone 2.1.2 for windows it launches a HTTP Proxy Server windows to log in, and in the advanced features I see that proxy server is localhost, proxy port is 8080 and user and password are empty.....What is this feature ??? Do I have to use it in my scenario ??? Thanks a lot !!! Alejandro _______________________________________________ Wengophone-devel mailing list [email protected] http://dev.openwengo.com/mailman/listinfo/wengophone-devel
