Hello
I'm struggling to make the necessary firewall changes required to
connect wengophone and
make PC to PC call.
I need to mention the following information for firewall changes.
Source IP
Destination IP
Source Port
Destination Port
Type of Port
So far I have identified following ports and IP addresses
1) Destination IP: 213.91.9.206 (SIP - UDP)
Source UDP and TCP port 5000 to 11000
Destination UDP and TCP port 5000 to 11000
2) Destination IP: 80.118.99.21 (STUN - UDP)
Source UDP ports from 5000 to 30000
Destination UDP port 3478
3) Destination IP: 80.118.99.11 (RTP - UDP)
Source UDP and TCP ports from 10600 and 10800
Destination UDP and TCP ports from 5000 to 30000
Now I could at least get connected to the test call. I hear the audio
but don't my echo back.
Also if I add any wengo user, I don't get any presence information.
And I can't make any call to any wengo user.
I could find from the capture log that 80.118.99.22 is also required.
Please let me know if there is any list of IP addresses and ports
needs to open/forward. Also I need to specify the destination port and
I observed that its dynamic and changes through the entire range.
Please let me know about these firewall changes required as I'm
struggling a
lot with this issue.
Thanks,
Mangesh
_______________________________________________
Wengophone-devel mailing list
[email protected]
http://dev.openwengo.com/mailman/listinfo/wengophone-devel
