I am monitoring routers using frame-relay ccts at customers and at the moment we use ping to see if they are up or down. Using ping does not give us enough information however, so I have decided to use SNMP to monitor the Abit status which when the cct is down and gives some more information as to the cause. This requires me to set up a custom service for the each PVC (DLCI). While this is ok, it seems that I have to set up a custom service to report that the PVC has gone down and another one for when it comes back up.
At the moment this is not too bad as we only have 15 customers but this will soon increase to over 100. This means that I will have over 200 entries!! Is there any other way that I can do this or somehow get Whatsup to automatically send an UP once the DOWN states changes? I know that there is this feature but is it only for pings? Any help would be great. Thanks Steve Carter Data Specialist Cable and Wireless Barbados Limited Direct Tel: (246) 292-6156 Direct Fax: (246) 292-9240 Mobile: (246) 231-5359 "Under commit, ...Over deliver" Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
