Try this... The IP address and SNMP password has been changed of course. :-)
### Global Config Options WorkDir: c:\mrtgstats\ved RunAsDaemon:Yes Interval:5 #=-=-=-=-=-=-=-=-=-=-=-=-=-=- CPU -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Target[192.168.72.34_cpu]: 1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0:[EMAIL PROTECTED] YLegend[192.168.72.34_cpu]: CPU Utilization ShortLegend[192.168.72.34_cpu]: % MaxBytes[192.168.72.34_cpu]: 100 Options[192.168.72.34_cpu]: nopercent, gauge, unknaszero Unscaled[192.168.72.34_cpu]: dwmy Legend1[192.168.72.34_cpu]: CPU Utilization Legend2[192.168.72.34_cpu]: . Legend3[192.168.72.34_cpu]: Max value per interval on graph Legend4[192.168.72.34_cpu]: . LegendI[192.168.72.34_cpu]: CPU: LegendO[192.168.72.34_cpu]: . Title[192.168.72.34_cpu]: cisco generic cpu PageTop[192.168.72.34_cpu]: <H1>cisco generic cpu</H1> Colours[192.168.72.34_cpu]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff WithPeak[192.168.72.34_cpu]: ymw # The following information allows you to perform some task(s) # whenever a minimum of maximum threshold has been breached # In order to activate this features, simply remove the # from the # lines below. # ThreshMinI[192.168.72.34_cpu]: $THRESHOLDMIN # ThreshMaxI[192.168.72.34_cpu]: $THRESHOLDMAX # ThreshProgI[192.168.72.34_cpu]: C:\PROGRA~1\Denika\cgi-bin\threshold_in.bat # ThreshProgOKI[192.168.72.34_cpu]: C:\PROGRA~1\Denika\cgi-bin\threshold_oki.bat # ThreshMinO[192.168.72.34_cpu]: $THRESHOLDMIN # ThreshMaxO[192.168.72.34_cpu]: $THRESHOLDMAX # ThreshProgO[192.168.72.34_cpu]: C:\PROGRA~1\Denika\cgi-bin\threshold_out.bat # ThreshProgOKO[192.168.72.34_cpu]: C:\PROGRA~1\Denika\cgi-bin\threshold_oko.bat Eric E. Anderson I.S. Manager, Information & Space Sector Veridian Dayton Help Desk (937) 476-2555 or [EMAIL PROTECTED] pager: http://bit-byte.com/pageme v (937) 476-2611 (direct) f (937) 476-2900 -----Original Message----- From: Glatt, Robert [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 11, 2002 1:11 PM To: wug (E-mail) Subject: [WhatsUp Forum] mrtg I know this isnt the proper place for this, so, I will apologize first. Can someone send me ([EMAIL PROTECTED]) a sample config file for MRTG that goes against a specific OID. I need to evaluate MRTG vs what we are using now. I would like to keep it simple and maybe gather the temperature from a APC UPS using MRTG. I am still reading thru all the stuff to figure it out on my own. Any help would be greatly appreciated. Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
