Craig,
I believe that you CAN just change ports. Since I e-mailed you those
instructions I followed last June, I have transferred my WUG installation
to yet another server, which does have IIS on it for other application
purposes, and I have configured the WUG web view to use port 8000, rather
than 80. I learned.........
Chris Powers
Systems Engineer
MCSE, CNA, Network+, A+
Keane IT Technical Services
(617) 517-1730
"Halvorson Jr, Craig"
<CHalvorsonJr@Ashleyfurnitu To:
<[EMAIL PROTECTED]>
re.com> cc:
Sent by: Subject: RE: [WhatsUp Forum]
Move WUG
[EMAIL PROTECTED]
switch.com
01/23/2003 12:32 PM
Please respond to
WhatsUp_Forum
Hi,
Can anyone help me on this one? In the steps given to me below to move WUG,
it says that I need to uninstall IIS. Is this really necessary or can I
just change ports. If this is necessary, an explanation why would be
helpful.
Thanks in advance,
Craig Halvorson
Network Technician
Ashley Furniture Industries
One Ashley Way
Arcadia, WI 52612
Phone: (608) 323 - 6910
Email: [EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 06, 2002 10:25 AM
To: [EMAIL PROTECTED]
Subject: Re: [WhatsUp Forum] Move WUG
Here's what I did to successfully transfer my WUG 7.02 installation to a
new server (with some under the table assistance from a WUG
techie.....Thanks!).
Steps to move WUG installation to a new server:
1. add new server to current server's domain and map drive to new server
2. copy over entire WhatsUp folder to new server(may not want to include
Logfiles subfolder, as it takes added time)
3. install WUG 7.0 CD on new server, then apply 7.01 and 7.02 patches
4. import the WhatsUp folder from the current server's registry under
HKLM\Software\Ipswitch
5. re-assign current server's static IP address to new server; make sure
that the data port is connected to the proper VLAN for the static IP
address
6. a reboot for the network configuration changes and then uninstalling
IIS is needed to enable the web view and successfully log in
Chris Powers
Systems Engineer
MCSE, CNA, Network+, A+
Keane IT Technical Services
(617) 517-1730
"Halvorson Jr, Craig"
<CHalvorsonJr@Ashleyfurnitu To:
<[EMAIL PROTECTED]>
re.com> cc:
Sent by: Subject: [WhatsUp
Forum] Move WUG
[EMAIL PROTECTED]
switch.com
06/06/2002 11:07 AM
Please respond to
WhatsUp_Forum
Hi all,
Does anyone know of an easy way to move WUG 7.02 from one server to
another?
Thanks
Craig Halvorson
Network Technician
Ashley Furniture Industries
One Ashley Way
Arcadia, WI 54612
Phone: (608) 323 - 6910
Email: [EMAIL PROTECTED]
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
