APC's document "PowerNet Management Information Base (MIB Reference Guide)" has information on turning off the power. Check Chapter 3, How to control a UPS. There is an OID upsAdvControlUpsOff, it has the right values for what you wish, there is also an OID to allow the UPS to stay up but disconnect the outlets (PDU).
Scott Morris Senior Network Engineer ORAU / ORISE 865-576-4672 'B' Schedule -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Monday, March 24, 2003 2:13 PM To: [EMAIL PROTECTED] Subject: Re: [WhatsUp Forum] APC UPS - emergency power off Hi, people. Does anybody know of a UPS MIB value of any type that relates to emergency power off? I've got two Symmetra 16Kva power array units. I saw nothing of the such in the APC MIB file, and on the website all I found with realation to EPO was APC's remote power off device, which can be used as part of an EPO system. Is this some type of set-up by which, if I know there is a disaster situation like a fire in a building, I can send out an SNMP set command that will force all power off through the UPS?? Thanks...... Chris Powers Systems Engineer MCSE, CNA, Network+, A+ Keane IT Technical Services Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
