Check out the following link from the archives of this board. Someone created a utility that checks https, and it seemed to provide good results for those who tried it:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg05789.html --- Mark Brody <[EMAIL PROTECTED]> wrote: > That's good news. It would take IP Sentry 3-4 > minutes to get through > each polling cycle. > > Thanks, > > Mark > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Benedict, > Jeff > Sent: Tuesday, July 08, 2003 12:19 PM > To: '[EMAIL PROTECTED]' > Subject: RE: [WhatsUp Forum] Monotring SSL/HTTPS > > > Mark, I have WUG set to poll every 60 seconds. > Because of it's > multi-threading, everything appears to get polled > during each session. > I have not had any issues with something missing a > poll. The only issue > I have is when our SAP tables are being updated in > the branch routers, > our Novell Servers may miss an IPX poll, but the IP > servers never miss a > heartbeat. > > > --------------------------------------------- > Jeff Benedict > Tech Services > Lan/Wan Support > 228-214-5465 > > -----Original Message----- > From: Mark Brody [mailto:[EMAIL PROTECTED] > Sent: Tuesday, July 08, 2003 2:09 PM > To: [EMAIL PROTECTED] > Subject: RE: [WhatsUp Forum] Monotring SSL/HTTPS > > > Jeff- > > How long does WUG take to poll all the servers - > assuming that none are > in failure and have to wait through a timeout > period? > > Thanks, > > Mark > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Benedict, > Jeff > Sent: Tuesday, July 08, 2003 12:06 PM > To: '[EMAIL PROTECTED]' > Subject: RE: [WhatsUp Forum] Monotring SSL/HTTPS > > > > Mark, > I'm not sure of the details, but WUG will process > SNMP traps. So if one > can be setup when the HTTPS service terminates, WUG > should be able to > process it. Don't know if it helps or not. > > FYI, we use WUG to monitor over 400 Servers 75+ at > our main site and > 325+ at remote branches across 2 states. We don't > seem to have too much > trouble with it. I don't have any experience with > any other product > though. > > --------------------------------------------- > Jeff Benedict > Hancock Bank > Tech Services > Lan/Wan Support > 228-214-5465 > > > -----Original Message----- > From: Mark Brody [mailto:[EMAIL PROTECTED] > Sent: Tuesday, July 08, 2003 1:59 PM > To: [EMAIL PROTECTED] > Subject: [WhatsUp Forum] Monotring SSL/HTTPS > > > My company is evaluating WUG. We currently use IP > Sentry in our > production environment. Although we are mostly > satisfied with IP Sentry, > it falls short in its abililty to monitor hundreds > of servers because it > is not multi-threaded. > > IP Sentry has a lot of great monitoring plugins > including an SSL/HTTPS > monitor. Ipswitch claims that it is not possible to > monitor HTTPS > resources. Why then can a $99 product do this? Or > has someone on this > list figured out a way to do this? > > Also, does anyone know where a good collection of > custom monitors can be > found so I don't have to recreate the wheel if we > decide to deploy WUG?. > A good list of examples would help tremendously for > things like SNMP > monitoring or MRTG monitoring. > > Best, > > :) Mark > > > Please visit > http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > > __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
