Your best bet might be to use the snmp capabilities within JetAdmin for alerting. As for the monitoring, WhatsUp will monitor an OID for a value and alert you based on how you set the service up.
----- Original Message ----- From: "Finbom Magnus" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, July 10, 2003 7:39 AM Subject: [WhatsUp Forum] A bit off-topic.. Snmp on Laserjet 4000 (snmp for noobs) Hi! Sorry for this off-topic subject. But if this forum cant answer my question then I think none can. I have lots of HP Laserjet 4000N that I want to snmp-watch in WUG. Rather new to the world of SNMP I know that there are two ways of getting info from WUG. A) WYG check a SNMP value and alert if it dont match. B) The printer send a trap when something happens and WUG is set to action of the triggers. I have set the communityname, setup SNMP on the wug-server and also activated snmp in wug and on the device on the map. And also imported laserjet Mib's. The problem is that I cant find where on the printer (laserjet 4000N) to set trap destination. I have serached for this entry with telnet, web-instarface and also HP Web jetadmin, but I cant find anywhere to set this value. Does anyone know how to do? Also, has anyone any hints on how to best implement a SNMP monitoring on Laserjet printers? Best regards Magnus Finbom IT-Engineer(Microsoft MCP, MCP+I, MCSE-NT4) Lansforsakringar Skaraborg Bank and Insurance Radhusgatan 8 54129 Skovde Sweden phone 0500 77 70 65, gsm 0708 71 70 60, fax 0500 77 70 30 [EMAIL PROTECTED] http://www.lansforsakringar.se/skaraborg Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
