Jon, Yes the %(service::justup)variable works in conjunction with Up Alert mode set to Send individual Up alert for the device and each service that comes up setting.
"For example, you send one e-mail message with different notification variables for services down and one message type with other variables for services up?" I can tell you that there are various notification variables that would only apply to the UP alert or the Down alert. So in a SMTPMail notification body, you would enter all variables you would use. And based on whether it is a Down alert or UP alert, you will see certain values. If I did not answer your question, I can try again:) Mark Singh WhatsUp Gold / FTP Support Manager Ipswitch, Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Burks, Jon Sent: Tuesday, August 05, 2003 5:27 PM To: [EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] Notification Message Variables Mark, Thanks! Does the %(service::justup) notification variable have to be used in conjunction with the Up Alert mode set to Send individual Up alert for the device and each service that comes up ? Also, is there a way to send a different formatted SMTPmail notification for the same device and SMTPmail recipient? For example, you send one e-mail message with different notification variables for services down and one message type with other variables for services up? Looks like this capability exist for the wav sounds notifications. Regards, Jon -----Original Message----- From: Mark Singh [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 05, 2003 3:04 PM To: [EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] Notification Message Variables In version 8.x of WUG there is notification variable called %(services::justup). It will allow you to see the abbreviated names of all services that came up with the last poll. http://www.ipswitch.com/Support/whatsup/guide/v800/8alerts%20and%20notifs4.h tml Mark Singh WhatsUp Gold / FTP Support Manager Ipswitch, Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Burks, Jon Sent: Tuesday, August 05, 2003 3:15 PM To: [EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] Notification Message Variables Brian, This question has been asked a number of times in the past on this forum, but so far I have yet to see a "Yes, and this is how you do it" response... Below is the same question I previously asked... Surely someone knows ? Thanks... Jon ----Original Message----- From: Burks, Jon Sent: Monday, March 03, 2003 6:47 PM To: [EMAIL PROTECTED] Subject: [WhatsUp Forum] Enumerate NT Service Up (Okay, but which one?) This is probably something simple that I am over looking, but perhaps you have seen this too? When receiving an alert for down a NT service, Whatsup will list the service in both the subject and text part of the e-mail alert. However, when receiving an alert for when the service comes back up, it does not list the service. I am using the same e-mail alert for both a down and up notification. This happens whether or not some services or all the services come back up. Any suggestions, other than RTFM or use the online help? Thanks.. Jon Alert Notification: Trigger: 4 polls (i.e., 4 minutes) Time period: 7 days a week, 24 hours a day Actions: Auto Send UP alert after sending DOWN alert - checked Up Alert Mode: Send UP alert after the device and all services are up - checked or Send individual UP alerts for the device and each service that comes up <===(? could solve issue) Send alert even if console response - checked I am using the following notification variables: Subject: %c %n %v %u at %t Message: %c %n %v %u at %t Address: %a Info 1: %1 Info 2: %2 Date: %d Status: %S ( %s) Svcs: %v <====== variable in question Notes: %N %m Below are the sample notifications: UP Alert Notification: -----Original Message----- From: WhatsUp-Pantest [mailto:[EMAIL PROTECTED] Sent: Monday, March 03, 2003 10:30 AM To: Burks, Jon Subject: Server GPSSTWB02 SVCUP at 10:29:40 <=====(Yeah, but which service?) Server GPSSTWB02 SVCUP at 10:29:40 Address: xxx.xxx.xxx.xxx Info 1: SSS Test Web #2 Tradesite.Pantest.com Info 2: Contact: Marketplace Ops Date: 03/03/2003 Status: Active and responding ( 0) Svcs: <=====(Yeah, but which service?) Notes: Compaq Prolaint DL 380 G2 SN D205JZG1K755 Service Tag 0116CPT10011 MAC 00-08-02-3E-42-5A DOWN Alert Notification: ----Original Message----- From: WhatsUp-Pantest [mailto:[EMAIL PROTECTED] Sent: Monday, March 03, 2003 10:20 AM To: Burks, Jon Subject: Server GPSSTWB02 SMTP (Simple Mail Transfer Protocol) ,HTTP (HyperText Transfer Protocol) SVCDOWN at 10:19:50 Server GPSSTWB02 SMTP (Simple Mail Transfer Protocol) ,HTTP (HyperText Transfer Protocol) SVCDOWN at 10:19:50 Address: xxx.xxx.xxx.xxx Info 1: SSS Test Web #2 Tradesite.Pantest.com Info 2: Contact: Marketplace Ops Date: 03/03/2003 Status: Active and responding ( 0) Svcs: SMTP,HTTP Notes: Compaq Prolaint DL 380 G2 SN D205JZG1K755 Service Tag 0116CPT10011 MAC 00-08-02-3E-42-5A -----Original Message----- From: Brian Boles [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 05, 2003 1:34 PM To: [EMAIL PROTECTED] Subject: [WhatsUp Forum] Notification Message Variables Currently, I am using the following variables for my messages: %n(Display Name) %V(Names of down services or monitors, followed by the word "services" %u(Can result in the word "UP, "DOWN", Event name", "SVCUP", or "SVCDOWN") at %t (Current Time) When I have an Ethernet interface go down, I get the full message I'm looking for, but when the interface comes back up, I only get the Devise Name with SVCUP- I would like to get which actual service came back up. Is there a variable for this? -brian Brian Boles Network Administrator Power Pulse Communications [EMAIL PROTECTED] 702-641-1660 Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
