Dean, WUG Technical support is wrong. You can monitor any SNMP oid with wug and therefore if you have the proper MIBS from the hardware manufactuer (Dell) and they are installed properly, you should be able to walk the mib to find the proper OID for the logical drive you want to manage.
The WUG technical support is refering to the SNMP2CA and SNMPw2k mib extensions which cannot do logical drive space on raided system. RANT AGAIN: If ipswitch would release the ability to monitor WMI objects like SNMP objects, we would not have this issue. -----Original Message----- From: Dean Naqvi [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 11, 2004 2:34 PM To: [EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] Disk Space Monitoring Hi I just spoke to WUG technical support and they told me WUG couldn't monitor raided disk. I have obtained the MIB file for the Dell Power Edge 2650 server and extract the information for WUG, but still no luck. I'm using Dell Open Manager and raid 5. Does anyone know for sure if they are correct? Regards Dean Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
