On Tue, 2011-01-04 at 22:58 +0800, Johnny Lee wrote: > Hi Doug, > > Thanks for your help. I checked my tools path is as you said on below, but > the wimaxd is still no response. > ================================================== > /etc/wimax/config.xml > WiMAX_DB.bin, WiMAX_Def.bin, Ver_info.bin in /var/lib/wimax > ================================================== > > I found my /var/log/wimax have no any record in new path install, but > default path install have correct record. > > I think so that my problem is some files aren't installed in correct > location. > I really hope to build-in wimax support in myself Linux distribution not > driver, tools and all develop kit in OS. > The fat OS will over my small size storage.
How did you build/install? If you followed the usual: ./configure --prefix=PREFIX ... make make install things should be all placed in their proper locations which were your configure flags? you can find by running ./config.status --version, third line > I hope have any message can add in the source code for build install, then I > can see/ read debug message for trace my problem. > It can show me how the tool or library is not in correct location. > > I still try it hard by myself so far, but I still cannot found any idea to > help me to found the root cause. > > Hope you understand and thanks for your help very much, > > Johnny Lee 李佳明 > ========================== > 祥寶科技 MICETEK International Inc. > 地址: 403 台中市忠明南路303號7樓 > 電話: (04) 2302-6168 ext:106 > ========================== > > -----Original Message----- > From: Doug Kehn [mailto:[email protected]] > Sent: Monday, January 03, 2011 9:13 PM > To: 'Inaky Perez-Gonzalez'; Johnny Lee > Cc: [email protected] > Subject: Re: How to trace wimaxd problem > > Hi Johnny, > > --- On Mon, 1/3/11, Johnny Lee <[email protected]> wrote: > > > Dear Inaky, > > > > I use 6250 wimax card in my PC. > > > > Normally, I execute 'wimaxd -d -I wmx0' then screen show up 3 lines > > message. > > > > I really can work as it well now. > > > > ========================= > > AppSrv is ready ! > > Act_FullRestart ! > > Act_DriverDevicesStatus - DRIVER_UP > > ========================== > > > > But now, I need to install all wimax libraries and tools in different > > path than default base on my Linux distribution requirement. > > > > After make & make install, there is no any responses from screen when > > I executed 'wimaxd -d -I wmx0'. > > > > I'm really confuse it that how can I trace my problem and find the > > solution to solve it. > > > > Actually, I can see the help statement when I executed 'wimaxd -h'. > > > > Could you please give me some trace ideas to solve the wimaxd no > > response problem? > > How was configure executed? For example, if wimax was configured with > --prefix=/ --sysconfdir=/etc --datarootdir=/var/lib wimaxd will look for > config.xml in /etc/wimax and the *.bin files (WiMAX_DB.bin, WiMAX_Def.bin, > Ver_info.bin) in /var/lib/wimax. > > I suspect the problem may be that one or more of the files mentioned above > aren't installed in the expected location. > > wimaxd.log may provide information. wimaxd.log is located in: > <--prefix>/var/log/wimax > > > Regards, > ...doug > > > > > _______________________________________________ wimax mailing list [email protected] http://lists.linuxwimax.org/listinfo/wimax
