Hi Doug and Inaky, As your suggestion, the problem was solved.
Very very thanks for your idea, Johnny Lee 李佳明 ========================== 祥寶科技 MICETEK International Inc. 地址: 403 台中市忠明南路303號7樓 電話: (04) 2302-6168 ext:106 ========================== -----Original Message----- From: Johnny Lee [mailto:[email protected]] Sent: Friday, January 07, 2011 1:15 AM To: 'Doug Kehn'; 'Inaky Perez-Gonzalez' Cc: '[email protected]' Subject: RE: How to trace wimaxd problem Hi Doug and Inaky, Thanks for this idea. I'm trying... And I'll let you know the result soon. I know my problem is not the wimax driver issue. It's an install problem by myself. I'm really thanks for your kindly help even though it is not your job. Thanks a million, Johnny Lee 李佳明 ========================== 祥寶科技 MICETEK International Inc. 地址: 403 台中市忠明南路303號7樓 電話: (04) 2302-6168 ext:106 ========================== -----Original Message----- From: Doug Kehn [mailto:[email protected]] Sent: Thursday, January 06, 2011 12:03 AM To: 'Inaky Perez-Gonzalez'; Johnny Lee Cc: [email protected] Subject: RE: How to trace wimaxd problem Hi Johnny, --- On Tue, 1/4/11, Johnny Lee <[email protected]> wrote: > From: Johnny Lee <[email protected]> > Subject: RE: How to trace wimaxd problem > To: "'Inaky Perez-Gonzalez'" <[email protected]> > Cc: "'Doug Kehn'" <[email protected]>, [email protected] > Date: Tuesday, January 4, 2011, 8:59 PM Dear Inaky and Doug, > > Attached file is my file structure for develop new linux distrubution > with wimax support. > All WiMAX linux drivers and packages are put in blue box as page 1 > show that. > My target path is in red box as page 1 show that. > Please refer to my configure instruction in the attached file. > For wimax-tools and wimax --prefix=/devel/build-tree/root is used. This means that wimax-tools and wimax will be looking for 'things' based at /devel/build-tree/root on the target system. I don't know but I doubt the target root filesystem contains such a path. Can you try, for both wimax-tools and wimax, setting --prefix= and then change the 'make install' to 'make install DESTDIR=/devel/build-tree/root? # ./configure --prefix= \ --with-linux=/devel/linux-2.6.35 \ --with-libwimax=/devel/build-tree/root # make # make install DESTDIR=/devel/build-tree/root # pkg-config --modversion libeap0 Regards, ...doug _______________________________________________ wimax mailing list [email protected] http://lists.linuxwimax.org/listinfo/wimax
