Hi, Upgraded to win4lin 3.0 and everything went smoothly. The installer automatically used patched kernel I already had (RH 6.2 2.2.17). Several things work much better in this version, compared to the previous versions. For example, the serial port performance is much better so that I can now HotSync my Palm at full speed. HUGE improvement there. Also, windows media player now works for audio streams which previously failed. Since these are a couple of the only things I still use in Windows, this is great. Just to push my luck, I decided to try to update to the 2.2.19 kernel for RH 6.2. There is a patch (not specifically labeled for RedHat so probably for the generic kernel) for 2.2.19 on the netraverse ftp site so I decided to try it on the RH 2.2.19 source tree. All the patches succeeded although most had offsets. I also found that I had to change NR_TASKS by hand to the usual value (3834) in order to get a kernel that booted. After that, it seemed to boot fine but when I try to run win4lin I get the following message: VMSVR_FAIL: dos: VM server initialize failed. errno=515. I'm assuming that there is something a little different in the RH 2.2.19 compared to the stock 2.2.19. Anyone have an idea of what is wrong? And is there going to be a set of RH 2.2.19 patches available from netraverse (2.2.19 is the current RH 6.2 recommended kernel)? TIA, Scott _______________________________________________ Win4Lin-users mailing list [EMAIL PROTECTED] https://lists.netraverse.com/mailman/listinfo/win4lin-users
