If you do more than one tests (3-4) you will see that the
performance increse is quite significant. Just put the
hdparm -c 3 /dev/hda
command in your rc.local (see my original mail).
Good luck
Murat
On 6 Jul 2001, at 19:24, Adalberto Manlio Donati wrote:
> I tested it and it made the access a bit faster (was 64 Mb in 5,44s =11.76
> MB/sec is 64Mb in 4,89s=13,09Mb/s)
>
> Is it worth?
>
> And if it is, how can I say linux to execute hdparm at every start?
>
>
> THank you,
>
> Adalberto
>
> Il 17:27, gioved� 5 luglio 2001, hai scritto:
> > On Thursday 05 July 2001 12:45 pm, Bill Gurley may or may not have written:
> > > Note especially that last sentence. Most of us are using an
> > > EIDE interface built into the motherboard, so I don't see
> > > how this would have any effect. I haven't tried it; maybe
> > > I'm wrong? The thing to do would be to run a benchmark
> > > utility before and after.
> >
> > hdparm -t /dev/hda
> >
> > before and after for quick benchmarks.
> >
> > http://plug.twuug.org/need_speed.shtml
> >
> > Hoyt
> > _______________________________________________
> > Win4Lin-users mailing list
> > [EMAIL PROTECTED]
> > https://lists.netraverse.com/mailman/listinfo/win4lin-users
> _______________________________________________
> Win4Lin-users mailing list
> [EMAIL PROTECTED]
> https://lists.netraverse.com/mailman/listinfo/win4lin-users
--
Prof. Murat Yildizoglu
Institut Federatif de Recherche sur
les Dynamiques Economiques
IFREDE - E3i ( http://www.ifrede.org/ )
Universite Montesquieu-Bordeaux IV
Avenue Leon Duguit, 33608 Pessac Cedex, France
Tel. +33 5 56 84 54 53
Fax: +33 5 56 84 86 47
e-mail: [EMAIL PROTECTED]
www : http://yildizoglu.montesquieu.u-bordeaux.fr/
Managing editor of e-JEMED: http://www.e-jemed.org/
______________________________________________________
_______________________________________________
Win4Lin-users mailing list
[EMAIL PROTECTED]
https://lists.netraverse.com/mailman/listinfo/win4lin-users
