http://winpcap.polito.it/misc/dialup.htm
GV ----- Original Message ----- From: "Mil House" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, September 21, 2002 7:19 AM Subject: [WinPcap-users] PROBLEM WITH Using WINDUMP with a WIN2K PPP Adapter > Hi, > > I am wondering if someone can help me out with this PPP adapter monitoring > problem on my Win2k system: I can use Windump (v3.8a) with WinPcap (v3.0a) > to monitor all INBOUND traffic on my PPP adapter (called NDISWan) connected > to a GPRS handset (i.e. equivalent to serial modem connection). However, I > cannot see any outbound traffic. Incidentally, I have exactly the same > problem with my wireless adapters, regardless of manufacturer (so far I have > tried Cisco, Nokia, Lucent): again, Windump only displays inbound traffic. > > I have read the FAQs and am aware that the wireless LAN adapters and PPP > adapters are "unsupported" as such, but I thought that since it clearly > works to display half of the traffic, then maybe someone has had the same > experience as me and has come up with a fix. > > If not, then maybe someone else can suggest which tool I can use to produce > a TCPDUMP like trace that can be fed directly into TCPTRACE, for my PPP > adapter (fingers crossed and hoping that someone has a hint to make my > WINDUMP work, because that would be the neatest way). > > Many thanks in advance! > > MiloMan > > > > > > > _________________________________________________________________ > Join the world�s largest e-mail service with MSN Hotmail. > http://www.hotmail.com > > > > ================================================================== > This is the WinPcap users list. It is archived at > http://www.mail-archive.com/[email protected]/ > > To unsubscribe use > mailto: [EMAIL PROTECTED]?body=unsubscribe > ================================================================== > ================================================================= This is the WinPcap users list. It is archived at http://www.mail-archive.com/[email protected]/ To unsubscribe use mailto: [EMAIL PROTECTED]?body=unsubscribe =================================================================
