Hello Peter,
well,I am a bit puzzled, as the only thing I have changed in that area is
the type of timing that triggers a new
painting of the upper waterfall, and this should not have any influence on the
quality or the sharpness of the waterfall
itself... just make sure that the choice labeled "WF Avg" just below the upper
waterfall is _not_ selected. When
changing program version, the settings are reset to their default state, and
the default for that choice is to be
selected... other than that I don't know what to suggest. If the problem
persists, please take a couple of screen
captures, one good and one bad and send them to me.
Please note everybody that from the feedbacks of people trying to implement a
DLL for Winrad, I discovered a new bug in
the program, which affects only those who are using an external DLL. This
evening or tomorrow I will release V1.24 witht
that bug corrected.
73 Alberto I2PHD
----------------------------
Peter Conway wrote:
> Hello Alberto,
>
> Have tried V1.23 and find the upper waterfall display now has a very
> 'smeary' effect and not the sharpness of signals in V1.22. All settings are
> the same and I have 'wound-back ' XP to that version and there is a definite
> difference in visual clarity. maybe there are some adjustments I can try?
>
> 73,
>
> Peter Hastings UK
_______________________________________________
Winrad mailing list
[email protected]
http://winrad.org/mailman/listinfo/winrad_winrad.org
