Hi Rocco,
Winrad is not meant to be used in conjunction with traditional radios. Even
if you connect the audio output of your
radios to Winrad, all what you will obtain would be a spectrum and a waterfall
limited to the about 3 kHz of the output
audio band.
You would need to open your rigs, and tap the 455 kHz IF before the selectivity
stages, feeding it to an external mixer
that will mix it down to about 20 or 30 kHz, then feed the resulting signal to
a PC sound card that will sample it at 96
kHz. At this point you will be able to use most of the functions of Winrad, and
you will use it also for the demodulation.
73 Alberto I2PHD
----------------------------------------
R wrote:
> Hi
>
> I don't have the SDR14 Hardware - I have a ICOM 7100
> UHF/VHF radio and the PCR1000 computer control radios
> ... is there any way to interface your software to
> these radios so I can get to enjoy the benefits of
> your excellent spectrum analysis and waterfall
> displays?
>
> Thanks
>
> Rocco
_______________________________________________
Winrad mailing list
[email protected]
http://winrad.org/mailman/listinfo/winrad_winrad.org
