The command is
wg set <device> [...] transit-net <pid|file-path> [...]
For example:
wg set wg0 transit-net 1
wg set wg0 transit-net /proc/1/ns/net
---
src/tools/config.c | 32 ++++++++++++++++++++++++++++++++
src/tools/containers.h | 6 +++++-
src/tools/ipc.c | 4 ++++
src/tools/man/wg.8 | 9 +++++++--
src/tools/set.c | 2 +-
5 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/src/tools/config.c b/src/tools/config.c
index 93525fb..b266026 100644
--- a/src/tools/config.c
+++ b/src/tools/config.c
@@ -14,6 +14,7 @@
#include <sys/socket.h>
#include <sys/stat.h>
#include <errno.h>
+#include <fcntl.h>
#include "config.h"
#include "containers.h"
@@ -74,6 +75,30 @@ static inline bool parse_port(uint16_t *port, uint32_t
*flags, const char *value
return ret == 0;
}
+static bool parse_transit_net(struct wgdevice *device, const char *arg)
+{
+ /* U32 arg -> PID */
+ if (isdigit(*arg)) {
+ char *end;
+ unsigned long pid = strtoul(arg, &end, 10);
+ if (!*end && pid <= UINT32_MAX) {
+ device->transit_net_pid = pid;
+ device->flags |= WGDEVICE_HAS_TRANSIT_NET_PID;
+ return true;
+ }
+ }
+
+ /* Otherwise -> file path */
+ device->transit_net_fd = open(arg, O_RDONLY);
+ if (device->transit_net_fd >= 0) {
+ device->flags |= WGDEVICE_HAS_TRANSIT_NET_FD;
+ return true;
+ }
+
+ perror("fopen");
+ return false;
+}
+
static inline bool parse_fwmark(uint32_t *fwmark, uint32_t *flags, const char
*value)
{
unsigned long ret;
@@ -392,6 +417,8 @@ static bool process_line(struct config_ctx *ctx, const char
*line)
if (ctx->is_device_section) {
if (key_match("ListenPort"))
ret = parse_port(&ctx->device->listen_port,
&ctx->device->flags, value);
+ else if (key_match("TransitNet"))
+ ret = parse_transit_net(ctx->device, value);
else if (key_match("FwMark"))
ret = parse_fwmark(&ctx->device->fwmark,
&ctx->device->flags, value);
else if (key_match("PrivateKey")) {
@@ -525,6 +552,11 @@ struct wgdevice *config_read_cmd(char *argv[], int argc)
goto error;
argv += 2;
argc -= 2;
+ } else if (!strcmp(argv[0], "transit-net") && argc >= 2 &&
!peer) {
+ if (!parse_transit_net(device, argv[1]))
+ goto error;
+ argv += 2;
+ argc -= 2;
} else if (!strcmp(argv[0], "fwmark") && argc >= 2 && !peer) {
if (!parse_fwmark(&device->fwmark, &device->flags,
argv[1]))
goto error;
diff --git a/src/tools/containers.h b/src/tools/containers.h
index 455d998..188f909 100644
--- a/src/tools/containers.h
+++ b/src/tools/containers.h
@@ -58,7 +58,9 @@ enum {
WGDEVICE_HAS_PRIVATE_KEY = 1U << 1,
WGDEVICE_HAS_PUBLIC_KEY = 1U << 2,
WGDEVICE_HAS_LISTEN_PORT = 1U << 3,
- WGDEVICE_HAS_FWMARK = 1U << 4
+ WGDEVICE_HAS_FWMARK = 1U << 4,
+ WGDEVICE_HAS_TRANSIT_NET_PID = 1U << 5,
+ WGDEVICE_HAS_TRANSIT_NET_FD = 1U << 6,
};
struct wgdevice {
@@ -72,6 +74,8 @@ struct wgdevice {
uint32_t fwmark;
uint16_t listen_port;
+ uint32_t transit_net_pid;
+ int transit_net_fd;
struct wgpeer *first_peer, *last_peer;
};
diff --git a/src/tools/ipc.c b/src/tools/ipc.c
index e3ef789..1bc98ed 100644
--- a/src/tools/ipc.c
+++ b/src/tools/ipc.c
@@ -569,6 +569,10 @@ again:
mnl_attr_put(nlh, WGDEVICE_A_PRIVATE_KEY,
sizeof(dev->private_key), dev->private_key);
if (dev->flags & WGDEVICE_HAS_LISTEN_PORT)
mnl_attr_put_u16(nlh, WGDEVICE_A_LISTEN_PORT,
dev->listen_port);
+ if (dev->flags & WGDEVICE_HAS_TRANSIT_NET_PID)
+ mnl_attr_put_u32(nlh, WGDEVICE_A_TRANSIT_NET_PID,
dev->transit_net_pid);
+ if (dev->flags & WGDEVICE_HAS_TRANSIT_NET_FD)
+ mnl_attr_put_u32(nlh, WGDEVICE_A_TRANSIT_NET_FD,
(uint32_t)dev->transit_net_fd);
if (dev->flags & WGDEVICE_HAS_FWMARK)
mnl_attr_put_u32(nlh, WGDEVICE_A_FWMARK, dev->fwmark);
if (dev->flags & WGDEVICE_REPLACE_PEERS)
diff --git a/src/tools/man/wg.8 b/src/tools/man/wg.8
index 5bae7ca..fd4caab 100644
--- a/src/tools/man/wg.8
+++ b/src/tools/man/wg.8
@@ -55,12 +55,17 @@ transfer-rx, transfer-tx, persistent-keepalive.
Shows the current configuration of \fI<interface>\fP in the format described
by \fICONFIGURATION FILE FORMAT\fP below.
.TP
-\fBset\fP \fI<interface>\fP [\fIlisten-port\fP \fI<port>\fP] [\fIfwmark\fP
\fI<fwmark>\fP] [\fIprivate-key\fP \fI<file-path>\fP] [\fIpeer\fP
\fI<base64-public-key>\fP [\fIremove\fP] [\fIpreshared-key\fP
\fI<file-path>\fP] [\fIendpoint\fP \fI<ip>:<port>\fP]
[\fIpersistent-keepalive\fP \fI<interval seconds>\fP] [\fIallowed-ips\fP
\fI<ip1>/<cidr1>\fP[,\fI<ip2>/<cidr2>\fP]...] ]...
+\fBset\fP \fI<interface>\fP [\fIlisten-port\fP \fI<port>\fP]
[\fItransit-net\fP \fI<pid|file-path>\fP] [\fIfwmark\fP \fI<fwmark>\fP]
[\fIprivate-key\fP \fI<file-path>\fP] [\fIpeer\fP \fI<base64-public-key>\fP
[\fIremove\fP] [\fIpreshared-key\fP \fI<file-path>\fP] [\fIendpoint\fP
\fI<ip>:<port>\fP] [\fIpersistent-keepalive\fP \fI<interval seconds>\fP]
[\fIallowed-ips\fP \fI<ip1>/<cidr1>\fP[,\fI<ip2>/<cidr2>\fP]...] ]...
Sets configuration values for the specified \fI<interface>\fP. Multiple
\fIpeer\fPs may be specified, and if the \fIremove\fP argument is given
for a peer, that peer is removed, not configured. If \fIlisten-port\fP
is not specified, the port will be chosen randomly when the
-interface comes up. Both \fIprivate-key\fP and \fIpreshared-key\fP must
+interface comes up. If transit-net is not specified, the network namespace
+through which encrypted packets are routed is the one in which the device
+was created. Otherwise the network namespace through which encrypted packets
are
+routed is the one specified by the argument. If the argument is an unsigned
+32-bit integer, it is interpeted as a process id, otherwise it is interpreted
as
+a file path. Both \fIprivate-key\fP and \fIpreshared-key\fP must
be a files, because command line arguments are not considered private on
most systems but if you are using
.BR bash (1),
diff --git a/src/tools/set.c b/src/tools/set.c
index d44fed9..fb11ed0 100644
--- a/src/tools/set.c
+++ b/src/tools/set.c
@@ -18,7 +18,7 @@ int set_main(int argc, char *argv[])
int ret = 1;
if (argc < 3) {
- fprintf(stderr, "Usage: %s %s <interface> [listen-port <port>]
[fwmark <mark>] [private-key <file path>] [peer <base64 public key> [remove]
[preshared-key <file path>] [endpoint <ip>:<port>] [persistent-keepalive
<interval seconds>] [allowed-ips <ip1>/<cidr1>[,<ip2>/<cidr2>]...] ]...\n",
PROG_NAME, argv[0]);
+ fprintf(stderr, "Usage: %s %s <interface> [listen-port <port>]
[transit-net <pid|file path>] [fwmark <mark>] [private-key <file path>] [peer
<base64 public key> [remove] [preshared-key <file path>] [endpoint <ip>:<port>]
[persistent-keepalive <interval seconds>] [allowed-ips
<ip1>/<cidr1>[,<ip2>/<cidr2>]...] ]...\n", PROG_NAME, argv[0]);
return 1;
}
--
2.18.0
_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard
